• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.243-246
• /
• 2008

ISM(Industrial, Scientific, Medical)대역은 비면허 대역으로 일정한 출력 규제만 지키면 자유롭게 사용할 수 있다는 장점으로 인하여 육상 통신뿐만 아니라 해상 통신 영역까지 그 사용량이 급증하고 있다. 이에 어선 내에서 사용하는 전파응용설비 및 ISM대역을 사용하는 소출력무선기기 등과의 전파간섭 문제는 시스템의 안정성을 열화시킬 수 있는 요인이 되며, 선박상황을 고려하면 안전성과 직결되므로, 간과되지 말아야 한다. 따라서 ISM대역에서 사용되거나 사용될 무선설비의 간섭확률 분석은 필수적이다. 본 논문에서는 Monte-Carlo 방식을 기반으로 하는 SEAMCAT를 이용하여 거리 및 밀도에 따른 간섭 시나리오와 전파 간섭 simulation methodology를 제안하였으며, 해상에서 환경을 가정하여 다른 전파간섭을 배제하였다. 제안된 시나리오를 적용하여 13.56MHz ISM 대역의 거리 시나리오 시뮬레이션 결과 RFID는 4.7m 이상, 모형기기는 2.7m 이상의 동종 기기간 이격거리를 가질 경우 간섭 영향이 양호하였다. 밀도 시나리오 시뮬레이션 결과 RFID(${V_r}$)를 중심으로 간섭 영향권에 RFID와 모형기기가 각각 2개 이하, 모형기기(${V_r}$)를 중심으로 간섭 영향권에 모형기기 2개 이하, RFID 1개 이하로 사용될 경우 통신환경이 양호함을 알 수 있었다. 제안된 간섭 시나리오 및 시뮬레이션 기법은 향후 ISM대역의 규제 정책 및 간섭확률 분석에 기여할 것으로 기대된다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.32-40
• /
• 2015

In this paper, the optimum antenna placement is analyzed by considering the interference between airborne antennas mounted on the unmanned aerial vehicle(UAV). The analysis is implemented by selecting the antennas that the distance and operational frequency band between airborne antennas is close to each other among the omni-directional antennas. The analyzed antennas are the control datalink, TCAS(Traffic Collision & Avoidance System), IFF(Identification Friend or Foe), GPS(Global Positioning System), and RALT(Radar ALTimeter) antennas. There are three steps for the optimum antenna placement analysis. The first step is selecting the antenna position having the optimum properties by monitoring the variation of radiation pattern and return loss by the fuselage of UAV after selecting the initial antenna position considering the antenna use, type, and radiation pattern. The second one is analyzing the interference strength between airborne antennas considering the coupling between airborne antennas, spurious of transmitting antenna, and minimum receiving level of receiving antenna. In case of generating the interference, the antenna position without interference is selected by analyzing the minimum separation distance without interference. The last one is confirming the measure to reject the frequency interference by the frequency separation analysis between airborne antennas in case that the intereference is not rejected by the additional distance separation between airborne antennas. This analysis procedure can be efficiently used to select the optimum antenna placement without interference by predicting the interference between airborne antennas in the development stage.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.6
• /
• pp.29-36
• /
• 1998

본 논문은 확산된 데이터에 반송파를 1개가 아닌 여러 개의 반송파로 변조하는 MC DS-CDMA 시스템을 적용하여 페이딩 요소를 고려하지 않는 채널, 즉 Gaussian 채널에서 다중 사용자 간섭 및 부분대역 재머, 최악의 부분대역 재머 간섭하에서 성능을 분석하여 단 일 반송파를 사용한 기존의 DS-CDMA 시스템과 비교 분석한다. 또한, Gaussian채널에서 고려된 간섭들에 대해 다중경로 페이딩 채널에서 시스템 성능을 분석하고 Gaussian채널에 서 분석된 시스템 성능과 비교한다.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.281-287
• /
• 2003

This paper proposed an improvement scheme for effective usage of radio-frequency management system(RFMS), which has been operated to facilitate national spectrum management and monitoring in Korea. Based on the wave propagation models, interference analysis algorithms, and sharing criteria recommended by ITU-R, we derived criteria for the automated selection of the channel interference analysis algorithms and sharing conditions adequate to the environment to be analysed. Then using the obtained criteria, computer and program has been made and shown to select the most appropriate propagation models, interference analysis algorithms, and sharing criteria from the ones provided in RFMS, with the illustrative example.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.95-100
• /
• 2011

This paper analyzes the interference effect of WLAN(Wireless Local Area Network) service on WiBro(Wireless Broadband) service in adjacent frequency band by using Monte Carlo method. For the analysis, we make scenario that WLAN service operates on frequency band of 2401 MHz ~ 2423 MHz and WiBro service operates on frequency band of 698 MHz ~ 704 MHz. In case of WiBro receiver is close to WLAN AP(Access Point), the interference will be increased. So, we calculate the protection distance between WiBro receiver and WLAN AP to meet interference probability of 5 % below and required interference power of WLAN AP to meet interference probability of 5 % below in the case of fixed protection distance. As a result, the protection distance of 60 m and -9.5 dBm of required interference power of WLAN AP at 10 m of the fixed protection distance are analyzed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.489-496
• /
• 2021

The X-band frequencies for transmitting the data from earth observation satellites are limited, so a number of satellites share the frequency bands. In order for multiple satellites to utilize same or adjacent frequency bands, International Telecommunication Union - Radiocommunication (ITU-R) limits power flux density (PFD), which overcomes the interferences among multiple satellites. However, even under the regulation, the interference effect needs to be analyzed when multiple satellites are connected to communicate with multiple ground stations (GSs) located close to each other. In this paper, the interference effect is analyzed based on signal to interference plus noise ratio (SINR) when two low earth orbit (LEO) satellites operating in different orbits are connected to communicate with randomly located two GSs in Korean peninsula. From the analysis results, it is confirmed that there can be interferences during 365 days operation even if the satellites meet PFD requirement, but the periods under interference effects are short and the interference can be foreseen.

• Journal of Korea Multimedia Society
• /
• v.15 no.8
• /
• pp.1031-1037
• /
• 2012

In this paper, we propose the interference probability according to distance between mobile stations and the maximal power of interfering transmitter as parameters which are used for analysis to co-exist in co-channel of different systems. In order to analyze interfering between each systems, we consider two cases. First, WiBro is an interfering transmitter and WLAN is a victim receiver. Second, WLAN is an interfering transmitter and WiBro is a victim receiver. When the interfering transmitter is WiBro or WLAN, interference probability according to distance between systems is analyzed by setting transmit power of 25 and 23 dBm, respectively. Analyzed coexistence results under various co-use scenarios may be widely applied into the technique developed to get the coexisting condition for wireless devices using many communication protocols in same frequency.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.61-68
• /
• 2010

Korea has made a plan to allocate CH 14~CH 51 (470 MHz~698 MHz) for DTV transition. Therefore, It is a necessary to take account compatibility between DTV service and other potential services. This paper assumes that DTV service operates on CH 51(692 MHz~698 MHz) and IMT service operates on CH 52(698 MHz~704 MHz), and then analyzes compatibility between DTV service and IMT service with Spectrum Engineering Advanced Monte Carlo Analysis Tool(SEAMCAT). The interference probability from IMT service to DTV service and capacity loss of IMT service due to interference from DTV service is studied, respectively. For the simulation, four interference cases in four different scenarios are considered. With considering the depolarization factor, a guard band of 8 MHz is required in the case of between IMT service downlink(DL) and DTV service, in the case of between IMT service uplink(UL) and DTV service, a guard band of 6 MHz is needed for the worst case of urban scenario on consideration of more then 15 dB increase of IMT system base station(BS) receiver blocking level.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.370-371
• /
• 2013

현재 운영 중인 DGPS RSIM은 다중 GPS/GNSS 수신기를 이용하여 의사거리 기반 보정정보와 그 무결성 기능을 제공하고 있다. 기준국 시스템 기반 무결성 기능 강화를 위하여, 본 논문에서는 기준국 수신기를 기반으로 전파간섭을 검출할 수 있는 간이 기법과 모니터링 시스템에 대해 다룬다. 기준국 시스템에 전파간섭의 영향을 받게 되었을 경우, 전파간섭 검출을 위한 신규 시스템을 추가하지 않고, 기준 운영 시스템, 즉 기준국 수신기의 실시간 원시정보 출력과 RSIM 메시지의 세부 파라미터 정보를 이용하여 전파간섭을 검출할 수 있는 기법 제안과 그 기법을 적용한 전파간섭 모니터링 시스템을 설계하고, 시뮬레이션 결과를 제시한다. 먼저 DGPS 기준국 시스템의 구성과 기능에 대해 설명하고, 무결성 기능의 한계를 제시한다. 또한 전파간섭이 발생했을 경우 기준국 수신기에 미치는 영향에 대해 분석하고, 분석 결과를 기반으로 기준국에 적용할 만한 간이 전파간섭 검출 기법과 이를 기반으로 한 시스템을 설계하여 그 활용 가능성을 제시한다. 성능평가 결과 제안한 기법 및 시스템이 국제해사기구(IMO)에서 요구하는 무결성 성능 중의 하나인 TTA(Time to Alarm) 10초 이내의 성능을 만족할 수 있음을 제시한다.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.53-63
• /
• 2021

As the types of radio equipment becomes more complex and diversified in various fields, radio interference occurs frequently. In the domestic situation where the territory is narrow, many systems are deployed in a specific highland with a good radio wave environment. Radar systems that transmit high power signals of the same band are sometimes deployed and operating at close distance. In this paper, the type of interference was classified for the actual radio wave interference phenomenon and appropriate signal interference parameters were derived. The power density of the interference signal was predicted using the analysis method and the effectiveness was verified through measurement. And, we propose a method to minimize interference by analyzing operating scenarios of interferer radar and victim radar.