• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.349-352
• /
• 2002

초음파 진단용으로 널리 사용되는 1차원 배열 압전형 초음파 변환기는 변환기내의 인접한 소자들간의 간섭에 의해 그 특성에 많은 영향을 받는다. 특히 각 소자 사이에 위치한 커프 및 음향 벽의 형상은 변환기 내 음향 간섭에 매우 큰 영향을 미친다. 그러므로 본 연구에서는 일반적으로 복부진단용으로 사용되는 압전형 1차원 배열 의료용 초음파 변환기에서 커프 및 음향 벽의 형상에 따른 음향간섭 레벨의 변화 경향을 유한 요소 해석법을 이용하여 분석하였다. 해석 결과를 바탕으로 소자간 음향간섭을 일으키는 원인을 규명하고, 나아가 음향 간섭레벨을 최소화하기 위한 구조적 방안을 도출하였다. 이러한 연구 결과는 향후 진단용 초음파 변환기의 최적 설계를 위해 중요한 자료가 될 것이며, 의료 치료용, 비파괴 검사용, 그리고 수중 초음파 변환기에도 적용이 가능할 것이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1530-1535
• /
• 1992

An optical method of phase shifting interferometry is presented for the 3-dimensional profile measurement of mirror surfaces with nanometer resolution. A series of optical interferometric fringes are generated by comparing the surface to be measured with a reference flat. The fringes are captured by a CCD camera and then analyzed to obtain actual surface profile. Detailed principles are described along with necessary image processing algorithms. finally, several measurement examples are discussed which were performed on lapped surfaces, hard discs, and semiconductor wafers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.639-644
• /
• 2001

Sequence Code Division Multiple Access) and TDMA(Time Division Multiple Access) system. In this system, the narrowband TDMA signals can cause intolerant interferences to CDMA signals. In this paper, DS-CDMA/TDMA frequency sharing system have been analyzed in AWGN(Additive white Gaussian Noise), MAI (Multi Access Interference) and NI(Narrowband Interference) environment. Also, performance improvement has been obtained by adopting an adaptive notch filtering scheme using complex filter bank and CCI canceller.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.226-230
• /
• 2001

Electronic Speckle Pattern Interferometry (ESPI) has been recently developed and widely used because it has advantage to be able to measure surface deformations of engineering components and materials in industrial areas with non-contact. The spekle patterns to be formed with interference phenomena of scattering phenomena measure the out-of-plane deformations, together with the use of digital image equipment to process the informations included in the speckle patterns and the display consequent interferogram on a computer monitor. In this study, the experimental results of a canti-levered plate using ESPI were compared with those obtained from the simple beam theory. The ESPI results of the canti-levered plate analyzed by 4-step phase shifting method are close to the theoretical expectation. Also, out-0of-plane displacements of a spot welded canti-levered plate were measured by ESPI with 4-step phase shifting technique. The phase map of the spot welded canti-levered plate is quite different from that of the canti-levered plate without spot welding.

• Korean Journal of Optics and Photonics
• /
• v.20 no.5
• /
• pp.272-275
• /
• 2009

In order to enhance the background noise filtering performance of the white light interferometry(WLI), we demonstrate the noise filtering performance of preprocessing of the measured fringe signals. The WLI was realized through a mirau interferometer which was equipped with a green LED. When measuring large-height and rough surface objects, the illumination optics are considered the numerical aperture(NA) and the depth of focus(DOF). In this case, the limited NA of the illumination optics has a considerable impact on the interference fringe. Therefore, we propose a preprocessing method that uses the intensity difference between the measured intensity and the moving average intensity. The performance is demonstrated by measuring an array of metal solder balls fabricated on printed circuit board(PCB). The proposed method reduces the noise pixels by 15 percent.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.2
• /
• pp.187-191
• /
• 2006

Few cases have been reported in which the femoral interference screw has migrated into the posterior compartment after an ACL reconstruction. It usually requires removal, because it leads usually to mechanical symptom. However, the arthroscopic removal of a screw is a technically demanding procedure, especially in the case of an intact integrated ACL graft or one that is encapsulated around the screw. We present a case in which a displaced femoral interference screw migrated within the posterior compartment 11 years postoperatively, after the graft had been successfully incorporated at the femoral site and showed good continuity on MRI and arthroscopic examination. Although it is often technically challenging, through the use of a posterior trans-septal portal, we can successfully remove a displaced femoral interference screw even in the most difficult locations in the posterior compartment without damage to ACL graft.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.400-403
• /
• 2002

This paper presents a shearographic technique for measuring in-plane strains. During the measurement, the test object is illuminated alternately with two laser beams, symmetrically with respect to the viewing direction. Employing a phase shift technique, the phase distributions due to object deformation for each beam are obtained separately. The difference of the two phase distributions depicts the derivative of in-plane surface displacements. The technique is equivalent to a system of many strain gages.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.574-578
• /
• 2014

본 연구에서는 인접 구조물의 상호 간섭에 의한 풍압 변화에 대한 분석을 수행하였다. 두 개의 구조물 사이의 거리 및 위치를 변경하여 비교 해석하는 것으로써 사각형 구조물 구현을 위해 EDISON_CFD를 이용하여 수치해석을 하였고, 유한 체적 법(Finite Volume Method, FVM) 기반의 범용 비압축성 유동 해석을 위해 2D_Incomp-P_2.1 해석자를 사용하였다. 이 연구를 통하여 인접한 구조물의 영향을 분석하여 상호 간 거리와 위치를 결정할 수 있는 근거자료를 확보하였다.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.772-776
• /
• 2004

The paper describes the quantitative determination of out-of-plane displacement from result of Shearogrpahy, which can measure the first-order partial derivative of out-of-plane displacement directly. However, the differential sensitivity of Shearography is related to the amount of shearing, which is manually adjustable in optical interferometer and affects the quantitative determination. The relationship between those is inspected by comparing ESPI with Shearography. From the result, the amount of shearing plays a modulation factor of out-of-plane displacement and small amount of shearing gives good agreement with out-of-plane displacement.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.397-401
• /
• 1995

ESPI(Electronic Speckle Pattern Interfermetry) is an optical technique to measure surface deforamtion of engineering components and materials in industrial ares. This optical method is capable of providing full-field results with high spatial resolution, high speed and is the non-contact technique. One of important application aspects using electronic speckle pattern interferometry is to generate contours of a diffuse object in order to provide data for 3-D shape analysis and topography measurement. The contouring method by modified dual-beam speckle pattern interferometry is proposed. We introduce a shift of the illumination beams through optical fiber in order to obtain the contour fringe patterns. The speckle pattern correlation technique is suitable for providing measurement range from millimeters to several centimeters. The complete geometric analysis of the contoretical and experimental results are obtained.