• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.652-657
• /
• 2013

In this paper the design methode of a separated composition state machine based on the compositive map with two chaotic maps together and the result of that is proposed. The digital circuits of chaotic composition map for the use of chaotic binary stream generator are designed in this work. The discretized truth table of chaotic composition function which is composed of two chaotic functions - the saw tooth function and skewed logistic function - is made out, and also simplefied Boolean algebras of digital circuits are obtained as a mathematical model. Consequently, the digital circuits of the map for chaotic composition function are presented in this paper.

• Journal of Korea Port Economic Association
• /
• v.23 no.2
• /
• pp.145-172
• /
• 2007

The goals of this paper are to analyze the present status of logistics on the Dongbei area in China and present implications to the related Korean companies. The mainland of China is very huge, we need to study each regional logistics of China separately. The Dongbei area is more than three times as much as the Korean peninsula, and the population is over two times as much as the two Koreas. Therefore, Korea which is trying to be a logistics hub in Northeast Asia has to pay attention to the logistics of China. This study tries to analyze the logistics of the Dongbei area, but except for the Liaoning province, we needs more information.

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.56-61
• /
• 1994

Magnetic fluid is ferromagnetic material in liquid state, so the surface configuration of magnetic fluid affects the magnetic field, and vice versa. To analyze the devices with magnetic fluid, the magnetic field equations and hydrodynamic equation should be solved simultaneously. This paper presents the numerical algorithm to obtain the surface configuration of fluid under the influence of gravity, pressure and magnetic field without conventional sim¬plified assumption. The algorithm consists of nonlinear finite element method and ferro-hydrodynamics, such as Poisson equations and Bernoulli equations, respectively The simulated configurations of fluid are compared with experimental results, and the influence of the amount of fluid and pole piece shape on the seal capacities are analyzed.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.99-112
• /
• 1998

국가경제의 기반시설인 지역간 고속도로와는 달리 도시고속도로는 도시내 교통을 담당하는 교통시설로서 대부분의 도시에서 건설중이거나 운용 중에 있다. 연속류 도로라는 시설측면을 지역간 고속도로와 비슷하나 이용주체, 차량구성비, 정시성, 제한속도 등 그 성격에는 다소 차이가 있을 것으로 판단된다. 이런 이유에서 현재 도시고속도로의 계획이나 운영에 대한 지침이 지역간 고속도로의 계획 및 운영에 대한 지침과 동일시 되고 있다는 점은 불합리한 것으로 판단된다. 그러므로, 본 연구에서는 도시고속도로의 계획과 운영에 대한 지침을 마련하기 위해 현재 운영중인 대구신천대로를 대상으로 교통류특성 등 기초적 연구를 수행하였다. 연구결과를 간략하게 나타내면 다음과 같다. . 교통류 모형분석에서 기존의 Greenshield 모형이 설명력 90%이상을 나타냈다. . 승용차환산계수 분석에서 중형차량이 1.16, 대형차량이 1.47로 분석되었다. . 용량분석에서 최대관측교통량은 4,684pcphpl, 차두시간분석은 2,432pcphpl, 교통류 모형에서는 2,422pcphpl로 분석되어, 대구신천대로의 서비스용량은 2,300pcphpl에 가까운 것으로 판단되며, 차로폭, 측방여유폭에 따른 보정으로 이상적 조건에서의 용량은 약 2,400pcphpl로 분석되었다. 이 결과는 도시고속도로가 지역간 고속도로의 기본교통용량 2,200pcphpl보다 약 200대 정도 높을 것으로 추정된다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.31 no.11
• /
• pp.8-14
• /
• 2002

가정용 룸에어컨이나 가정, 점포, 사무실에 사용하는 패키지에어컨은 쾌적한 주거 사무공간을 실현할 수 있기 때문에 최근 10년 동안에 광범위하게 보급되었고, 그 기술도 해마다 진보하고 있다. 그림 1에서 나타나듯이 2001년 가정용 룸에어컨의 국내생산 수량은 연간 600만대 수준이며, 패키지에어컨은 연간 약 80만대 수준이다. 2001년 기준으로 에어컨의 국내시장규모는 약 130만대로 세대 보급률이 약 40%에 도달하고 있다. 비록 패키지에어컨은 생산 수량면에서는 룸에어컨과 비교할 수 없지만, 한대의 냉방능력이 룸에어컨의 수배에서 수십배로 크기 때문에 전력에너지소비, 환경 등에 미치는 영향은 룸에어컨과 비견될 수 있다. 공조장치 보급에 따른 환경, 에너지 측면에서의 사회적 영향과 관심이 점차 커지고 있고, 이것을 개선하기 위한 기술개발이 활발하게 진행되고 있다. 에어컨을 포함한 공조장치의 다수는 효율이 좋은 증기 압축식 냉동사이클로써 구성되어 있으며, 증기 압축식 사이클에서 냉매가스를 압축하여 순환시키는 심장역할을 하고 있는 것이 압축기이다. 또한 압축기는 공조장치 전체의 전력소비의 80%에서 90%을 차지하고 있어 에너지절감 기술개발과 환경기술개발의 포인트가 되는 기구이다. 최근에 에어컨용 냉매압축기의 기술적인 개발동향을 정리하면 다음과 같은 경향으로 진행되고 있다. (1)오존층 파괴 지수가 제로인 친환경 HFC계와 자연냉매용 밀폐형 압축기기술 (2)로터리압축기의 성능향상 및 대용량화 기술 (3)압축기용 모터의 DC화통에 의한 모터 효율 향상 및 압축기 효율 향상 기술 (4)스크롤압축기의 압축비 변화의 대응, 고효율 유지, 대용량화 등 성능향상기술 (5)로터리, 스크롤, 왕복동 압축기를 이용한 용량가변기술 본 논고에서는 룸에어컨과 패키지에어컨에서 사용되고 있는 밀폐형 압축기에 대해서 그림 2에서 나타내고 있는 냉방능력 10tons(120,000Btu/h) 이하를 중심으로 상기의 최근 기술 동향을 간략하게 소개하고자 한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.9
• /
• pp.24-30
• /
• 2009

This paper presents a simple resource allocation scheme for throughput enhancement in relay based orthogonal frequency division multiple access (OFDMA) cellular systems. The resource allocation schemes, which are based on the optimization problem, have high computational complexity. That is why a searching process is required on the overall allocable resources. Since these schemes should be performed in real time, we propose a simple resource allocation scheme which has very low computational complexity. Firstly, we formulate the optimization problem and draw observations for throughput maximization. Based on observations, we propose a three step allocation scheme that separates the allocable resources into three (i.e. relay, frequency and time). By doing so, the computational complexity can be reduced. Simulation results show that the proposed scheme has near-optimum performance in spite of its low computational complexity.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.1
• /
• pp.121-133
• /
• 2013

This paper presents the results of an investigation into the pull-out capacity characteristics of screw anchor piles. Theoretical background of screw anchor pile (SAP) was first discussed. A series of reduced-scale model tests were performed on a number of cases with different SAP geometries such as pitch and diameter of screw as well as relative density of the model ground. The applicability of the pull-out capacity prediction equations were also examined based on the test results. It was shown that the pitch of screw has negligible effect on the pull-out capacity, while the diameter of screw has relatively large effect on pull-out capacity under a given condition. Practical implications of the findings from this study are discussed in great detail.

• Journal of the Korea Concrete Institute
• /
• v.28 no.6
• /
• pp.723-731
• /
• 2016

In pretensioned concrete members, a certain bond length from the end of the member is required to secure the effective prestress in the strands, which is defined as the transfer length. However, due to the complex bond mechanism between strands and concrete, most transfer length models based on the deterministic approach have uncertainties and do not provide accurate estimations. Therefore, in this study, Adaptive Neuro-Fuzzy Inference System (ANFIS), a Neuro-Fuzzy System, is introduced to reduce the uncertainties and to estimate the transfer length more accurately in pretensioned concrete member. A total of 253 transfer length test results have been collected from literatures to train ANFIS, and the trained ANFIS algorithm estimated the transfer length very accurately. In addition, a design equation was proposed to calculate the transfer length based on parametric studies and dimensional analyses. Consequently, the proposed equation provided accurate results on the transfer length which are comparable to the ANFIS analysis results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.465-469
• /
• 2019

In this paper, the design of BLDC (brushless direct current) motors based on torque and back-EMF equations was carried out to assess the application of the motor in concrete vibrators. The air gap flux density of the motor is an important parameter because the length of the motor and the size of the diameter are given. The air gap magnetic flux density was calculated through a simplified magnetic circuit, and basic design of the shape and dimensions of the motor were then determined by carrying out experiments based on torque, back-EMF, and air magnetic flux density equations. After setting the outer and inner diameters, stack lengths, and rated speed of the motor, a detailed design was performed by simulations using the finite element method by designating the diameter and thickness of the motor as the key parameters. The final design to satisfy the target torque and the lowest THD (Total Harmonic Distortion) was carried out along with a simulation.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.2
• /
• pp.52-60
• /
• 2002

Line heating is a forming process which makes the curved surface with the residual strain created by applying heat source of high temperature to steel plate. in order to control the residual strain, it is necessary to understand not only conductive heat transfer between heat source and steel plate, but also temperature distribution of steel plate. In this paper we attempted to analyze is temperature distribution of steel plate by simplifying a line heating process to collision-effusive flux of high temperature and high velocity, and conductive heat transfer phenomenon. To analyze this, combustion in the torch is simplified to collision effusive phenomenon before analyzing turbulent heat flux. The distribution of temperature field between the torch and steel plate is computed through turbulent heat flux analysis, and the convective heat transfer coefficient between effusive flux and steel plate is calculated using approximate empirical Nusselt formula. The velocity of heat flux into steel plate is computed using the temperature distribution and convective heat transfer coefficient, and temperature field in the steel plate is obtained through conductive heat transfer analysis in which the traction is induced by velocity of heat flux. In this study, Finite Element Method is used to accomplish turbulent heat flux analysis and conductive heat transfer analysis. FEA results are compared with empirical data to verify results.