• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.501-507
• /
• 2017

When zenor diode load current is necessary to be controlled by input voltage as a circuit load, existing voltage controlling method cannot be applied to it because the output current of zenor diode is changed due to breakdown voltage variations. We propose input voltage controlled output current source regardless of zenor breakdown voltage variation due to degradation resulted from severe current applied electronic component life test as a circuit load in this paper. We show breakdown voltage characteristics of this zenor diode circuit through simulation, applying adequate values for each component in order to verify the circuit composed of that method, and then show the result in which output current is controlled by input voltage. We confirmed the output current varies proportional to input voltage, and developed circuit shows a constant value independent of zenor diode breakdown voltage variations due to component degradations.

• Applied Biological Chemistry
• /
• v.41 no.2
• /
• pp.160-165
• /
• 1998

Current discriminating technique of rice variety is known to be not objective till this time because of depending on naked eye of well trained inspector. DNA finger print method based on genetic character of rice has been indicated inappropriate for on-site application, because the method need much labor and skilled expert. The purpose of this study was to develops the identification technique of polished rice varieties using CCD camera images. To minimize the noise of the captured image, thresholding and median filtering were carried out, and edge was extracted from the image data. Image data after pretreatment of normalize and FFT(fast fourier transform) were used for library model and feedforward backpropagation neural network model. Image processing technique using CCD camera could discriminate the variety of rice with high accuracy in case of quite different rice of shape, but the accuracy was reached at 85% in the similar shape of rice.

• Journal of Korean Society of Forest Science
• /
• v.36 no.1
• /
• pp.1-4
• /
• 1977

The variation of isoperoxidase band patterns in the zymograms in the leaves of ${\times}$P. albaglandulosa clones showing excellent growth were observed by starch gel electrophoresis in this study. The results are summerized as follows; The numbers of total bands in the clones were six to eleven. Four to seven were active and one to four were of trace in these bands, and also active bands appeared plentifully in all clones. The appearing pattern of the bands was more monotonous to the cathode than to the anode. Besides, the uniqueness of the isoenzyme forms in each clone made possible to identify the clones, and g and 1 bands were fixed in ${\times}$P. albaglandulosa, ${\times}$P. albaglandulosa being $F_1$ hybrid, the genetic variation of isoenzyme forms was significant statistically.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.158-168
• /
• 2016

This article is to review various methods used to investigate internal and marginal adaptation of fixed dental prostheses, and to summarize a merit, worth, and limitation of each method, using some results of previous studies. The methods of measuring internal and marginal gap are divided into two categories in this study; in vivo and in vitro. In vivo methods are clinical evaluations, including exploration, radiography, and impression technique. In vitro methods are laboratory evaluations such as direct view, cross-sectioning, and silicone replica technique using microscope. Measuring by micro computed tomography (CT) or profilometer is also in vitro methods. In recent years, the development of scanning systems is able to analyze 3-dimensional internal and marginal space in detail. As measuring and analyzing technology become more advanced, the ability to thoroughly examine crown adaptation is becoming both simpler and more efficient.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.799-804
• /
• 2011

The LFLP (Linear Fresnel Light Pipe) system uses a linear Fresnel lens to follow the sun and concentrates the parallel sunlight into a line. A LFLP daylighting system has been developed and updated to a DBLP (Double Blind Light Pipe) daylighting system to improve the overall system efficiency in the morning and afternoon. The new design consists of a double-blind style with a cone-shaped light transformer. The blinds are used to collect the sun's altitude and azimuth movements through the day. Behind the two sets of blinds is the light transformer, which is based on a parabolic-shaped light concentrator. The light transformer is designed to efficiently deliver light within a thirty-degree radial spread so that the light pipe can internally reflect the light. The results of scale-model tests are encouraging, and the efficiency is three times higher than that of the previous LFLP system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.494-494
• /
• 2012

비점오염이란 도시, 도로, 농지, 산지, 공사장 등 불특정 장소에서 발생되는 오염을 말하며 건기 시에는 오염물질이 토지에 축적되었다가 강우 발생 시 강우와 함께 유출되어 관리에 많은 어려움이 있다. 유출된 오염물질은 특별한 전처리 없이 하천이나 호소로 유입되어 각종 수질오염, 부영양화 및 생활환경에 많은 영향을 받게 되며 상수원수에 문제가 발생하게 된다. 비점오염원의 특징은 초기강우 유출수는 고농도이며 토사, 협잡물 등이 많이 포함되어 있다. 초기강우 발생형태는 수로의 형태, 노면상태 유역현상 및 강우도달시간 등 유역의 특성에 따라서 달라지며, 토지이용상황, 하수도 정비여부 등에 따라서 오염물질의 종류와 농도가 변한다. 도시지역과 도로주변에는 먼지, 쓰레기, 마모된 타이어 등이 축적되며, 임야 및 산림에서는 비료, 축분, 대기오염물질의 강하물 등이 축적이 되어 강우 시 빗물에 씻겨 인근 수계로 직접 방류된다. 팔당상수원 비점오염원 최적관리사업 기본계획 및 타당성조사사업이 실시되어 비점오염저감시설의 설치대상 대표지점이 선정되었다. 그리고 각 배수구역의 특성에 맞는 최적관리기술이 제시되었다. 하지만 몇몇 시설들은 기대한 결과에 못 미치는 성과를 내고 있다. 따라서 이번 연구에서는 이러한 비점오염저감시설의 시설형 중 하나인 와류형 비점오염저감시설의 운용에 따른 효율성 분석에 관한 연구를 실시하였다. 실험장치는 현재 운영되고 있는 와류형 비점오염저감시설 참고하여 실험장 조건에 맞춰 1/4축적의 정상모형을 제작하였고 저감시설로 유입되는 원수의 유량과 단차를 변화시켜 실험하였다. 저감시설의 유입조건이 변하게 되면 시설 내 유속, 체류시간 등 운전조건이 바뀌게 되므로 제거효율도 변하게 될 것이다. 저감효율산정은 시설로 유입된 유입수와 유출수의 SS농도를 이용하여 산정하였다. 와류형저감시설의 SS제거효율을 연구한 결과, 모형에서 유량 $0.0016m^3/s$, 단차 10cm 인 조건에서 8.7%로 가장 높은 효율이 측정되었다. 이를 원형에서의 조건으로 환산하면 유량 $0.0512m^3/s$, 고수조와 저감시설의 단차 40cm일 경우 가장 높은 효율이 나타난다. 이와 같은 이유는 시설에 유입되는 유량이 증가 할수록 내부의 유속이 증가해 저감시설 내 처리수의 체류시간 감소와 교란이 발생하여 저감효율이 떨어지는 것으로 사료된다.

• The KIPS Transactions:PartD
• /
• v.17D no.6
• /
• pp.471-480
• /
• 2010

The purpose of this study is to explore determinants which affect the significant increase in the user acceptance of smart phone. This study also analyzes the effect of each variable on the actual acceptance by empirical methods. In this study, first, the system quality and the service quality are defined as independent variables based on developed IS success model of DeLone & McLean(2003). Second, we proposed the research model by providing trust and perceptual immersion as intermediate variables, and user satisfaction and actual use as dependent variables by the proceeding research for accepting information technology and new service. Third, the statistical analysis is conducted by surveying to 200 smart phone users for verifying a validity of research models and hypotheses. As a result, almost hypotheses are accepted in confidence interval except for the hypothesis between security and trust variable.

• Journal of Korean Society of Forest Science
• /
• v.7 no.1
• /
• pp.45-49
• /
• 1968

This experiment was carried out to study moisture contents including in the woody parts of standing Pitch Pine trees. The moisture measuring samples were made from the parts of root, branch, top, sapwood and heartwood of test trees. The test trees and average moisture contents measured from the parts of trees are as table (1) and (2). According to the results this study may be concluded as followings. 1) In the winter felled Pitch Pine trees highest moisture contents are shown in the top wood but lowest in the heartwood among the parts of tree. 2) In comparing moisture contents showing between two parts of tree, significant differences are show between top or heartwood and other parts but between branch or sapwood and root are not shown. 3) As general there is no significant variation in moisture contents of root, sapwood and heartwood among the test trees but branch wood is shown considerable variation.

• Journal of Practical Engineering Education
• /
• v.11 no.1
• /
• pp.117-123
• /
• 2019

The aim of this study was to investigate the priority partner countries for technical vocational education and training (TVET), using the cluster analysis. The partner countries were prioritized for finance supports and knowledge sharing. We had also redesigned the TVET assistance process as well as reflected the needs of recipient countries for TVET. Especially, by redesigning the methodological support process, we also increased the effectiveness and efficiency of TVET official development assistance. In research method, potential 24 priority partner countries have been designated by the international development cooperation committee and selection criteria of international cooperation agencies and banks. Then, we conducted the cluster analysis, using three main variables: economic factor, labor market factor, education factor. In results, we clustered four and three types of the priority partner countries for TVET. In future, we suggested the new approach for selecting the priority partner countries in terms of employment and labor as well as non-designated partner countries, which will need to cooperate for TVET.

• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.317-323
• /
• 2022

This study aimed to qualitative analyze the cusp variation pattern of the mandibular second premolars using a three-dimensional virtual models, and to analyze the left-right bilateral symmetry with a quantitative analysis of the tooth surface area according to the cusp variation. 127 virtual mandibular second premolars were prepared and individual absolute/relative cusp area, total crown area and groove form were analyzed using RapidForm2004(INUS technology INC, Seoul, Korea). Independent t-test, Kruskal-Wallis test and chi-square were performed. As a result, the groove form showed high bilateral symmetry between the left and right sides. Based on the left side of groove form, the bilateral symmetry was 100.0% for the U pattern, and 73.7% for the H patterned, and 78.9% for the Y pattern(p<.001). The finding could be as a meaningful reference for manufacturing CAD/CAM dental prostheses, and it is expected that further studies will be conducted on more samples including the mandibular second premolar immediately after eruption.