• Title/Summary/Keyword: 각의 변

Search Result 1,813, Processing Time 0.03 seconds

Application of the Equivalent-Field Method for Output Calculation: Is it safe for elongated x-ray fields\ulcorner (출력인자 계산에 이용되는 등가면법의 타당성 연구 : 장방형 X-선 조사면에 대해서 안전한가\ulcorner)

  • Kim, Chang-Seon;Kim, Chul-Yong;Park, Myung-Sun
    • Progress in Medical Physics
    • /
    • v.9 no.4
    • /
    • pp.195-200
    • /
    • 1998
  • Purpose: When an elongated x-ray field is used for treating a patient, the equivalent- field method is commonly used for the output calculation. This study is intended for investigating potential factors such as, beam quality, field elongation ratio, and depth of measurement, which might effect on the applicability of the equivalent square technique for output calculation. The derivation of a 'rule of thumb' for the application criteria of the equivalent-field method is also aimed. Materials and Methods: Three x-ray beams, 4-, 6- and 10-MV, were employed for this study. Width of the rectangular field was ranged from 5-40 cm and the elongation ratio (length/width) 1:0 to 10:0. An elongation effect was measured in a water phantom at three different depths, dmax, 5-cm, and 10-cm. For an elongated field and its equivalent square field, the output factor was measured and the difference in the output factor were examined between two fields. Results and Discussions: As the elongation ratio increases, a larger discrepancy in outputs is observed between the elongated rectangular field and its corresponding equivalent square field. Output was measured larger for an elongated field than for its corresponding equivalent square field and the maximal difference over 10 % was found. The difference was found larger for the smaller field with the same elongation ratio. The effect of the beam quality and the depth of measurement on the output difference was minimal. Conclusion: Based on the study, there is criteria for the application of the method for output calculation. For the combination of long axis and elongation ratio whose relationship satisfies Elongation ratio < (0.48) (Long axis) - 0.5, the equivalent-field method is valid for output calculation within 2 % for the field whose long axis < 25-cm. For other combinations, instead of using the equivalent-field method, direct output measurement is recommended. This criteria can be applied for 4-10 MV x-ray beams up to 10-cm depth.

  • PDF

Comparison of the Numerical Methods for the Optimum Antireflection Coatings of Laser Diode Facets (레이저 다이오드 단면의 최적 무반사 코팅을 위한 수치해석 방법 비교)

  • 이세진;김부균
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.18 no.12
    • /
    • pp.1935-1944
    • /
    • 1993
  • We calculate the optimum refractive index and thickness for a single layer antireflection coating as a function of active layer thickness of a laser diode using three different simplified numerical methods. The difference of the results using three methods comes from that of the effective refractive index of a laser used in three methods. We compare three simplified methods to an exact method to check the validity of the simplified methods. We conclude that the simplified method, choosing the effective index of a laser diode as a function of incidence angle of each plane wave composing of a guided mode agree well to an exact method for both TE and TM modes and the cases of strongly and weakly guiding.

  • PDF

BER Performance Analysis of Hierarchical-MPSK Using Phase Parameters (위상 파라미터 도출을 통한 H-MPSK의 BER 성능 분석)

  • Lee, Won-Joon;Park, Sang-Kyu
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.4
    • /
    • pp.375-380
    • /
    • 2009
  • Bit error rate(BER) performance of each bit for hierarchical M-ary phase shift keying(H-MPSK) modulation scheme is changed according to the phase parameters. Thus, a method to find the phase parameters appropriate to the requests of the system is needed. In this paper, we propose a method to obtain the phase parameters from an approximate approach of BER for H-MPSK and verify a validity of the proposed method through the previously provided expression for analyzing an exact error probability of H-MPSK.

Procedural Modeling Algorithm for Traditional Stone Fence Creator (전통 돌담 생성을 위한 절차적 모델링 알고리즘)

  • Park, Kyeongsu
    • Journal of Digital Convergence
    • /
    • v.11 no.8
    • /
    • pp.205-212
    • /
    • 2013
  • In this paper, we present a procedural modeling algorithms to create Korean traditional stone fence using the fractal subdivision. The main process of the algorithm is to get the next step mesh by subdividing each triangle in the previous step triangular mesh. This process is repeated recursively. Dividing each triangle into four sub-triangles after choosing a random point on each side of the triangle and moving each vertices in the normal direction with random perturbations make the bumpy appearance of stone fences. In each step we remove flat vertices which does not influence the shape of the stone. The discrete curvature determines the flatness of a vertex. New triangles whose vertices are the vertices around the removed vertex are added to make a triangular mesh.

Channel Estimation scheme for IEEE 802.11a system based on MIMO-OFDM systems (IEEE 802.11a 기반의 MIMO-OFDM 시스템을 위한 채널 추정 기법)

  • 안치준;안재민
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.6A
    • /
    • pp.640-650
    • /
    • 2004
  • Channel estimation schemes are proposed for Multiple Input-Multiple output Orthogonal Frequency Division Multiplexing(MIMO-OFDM) systems based on the physical layer specification of the IEEE 802.1 la. By combining the space-time block coding(STBC)/ space-frequency block coding(SFBC) techniques with the transform domain interpolation, the proposed algorithms achieve more accurate channel coefficients for the MIMO channels such that improve the BER performance. The performance improvements of the proposed algorithms are evaluated by simulations under the various multipath fading channel environments and various transmission rates.

금속 공간층을 가진 fringing field 효과를 이용한 SONOS 구조를 가진 낸드플래시 기억소자의 전기적 성질

  • Kim, Seong-Ho;Yu, Ju-Hyeong;Kim, Tae-Hwan
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.214-214
    • /
    • 2010
  • 단위면적 당 메모리 집적도를 높이기 위해 플래시 기억소자의 크기를 줄일 때, 셀 사이의 거리의 감소에 의한 간섭효과가 매우 커져 소자 크기의 축소가 한계에 도달하고 있다. 이러한 문제점을 개선하기 위해 본 연구에서는 fringing field 효과를 이용한 SONOS 구조 게이트 위에 금속 공간층을 가지는 플래시 메모리 소자를 연구하였다. 소자에 소스와 드레인에 도핑을 하는 공정단계를 거치지 않아도 되는 fringing field 효과를 이용한 SONOS 구조를 가진 기억소자에서 트랩층 양 쪽에 절연막을 증착하고 게이트 외측으로부터 트랩층 양 쪽 절연막까지 금속을 증착시켜 금속 공간층을 형성하였다. 게이트에 전압을 인가할 때 트랩층 절연막 외측의 금속 공간층 영역에도 동시에 전압이 인가되므로 게이트가 스위칭 역할을 충분히 하게 하기 위해서 트랩층 양 쪽 절연막 두께를 블로킹 산화막 두께와 같게 하였다. 소자의 누설전류를 감소하기 위하여 채널 아래 부분에 boron으로 halo 도핑을 하였다. 제안한 기억소자가 fringing field 효과에 의해 동작하는 것을 확인하기 위하여 Sentaurus를 사용하여 제시한 SONOS 구조를 가진 기억소자의 전기적 특성을 조사하였다. 시뮬레이션을 통해 얻은 금속 공간층이 있을 때와 없을 때에 대한 각 상태에서 같은 조건으로 트랩층에 전하를 트랩 시켰을 때 포획된 전하량이 변하였다. 각 상태에서 제어게이트에 읽기 전압을 인가하여 전류-전압 특성 곡선을 얻었으며, 각 상태에서의 문턱전압의 변화를 통해 금속 공간층이 있을 때 간섭효과가 감소하였다.

  • PDF

Assessment of Close-to-nature Rivers Restored in Chung-Buk Province (충북도내 조성된 자연형 하천의 조사 및 평가)

  • Yeon, Gyu-Bang;Yeon, In-Sung;Yoon, Kang-Hun;Maeng, Seung-Jin
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2010.05a
    • /
    • pp.536-540
    • /
    • 2010
  • 본 연구는 충청북도 내 각 지자체에서 조성한 자연형 하천에 대하여 자연형 하천의 기능을 올바르게 이해하고, 친자연공법을 적용하여 "내고장 하천살리기" 사업을 제대로 시행하고 있는지를 조사하고 평가한 것이다. 주민들이 경제적으로 여유를 가지게 되면서 마음의 안정과 심미적 가치를 주거지의 인접거리에 있으면서 생태학적으로 가장 역동적인 생물서식지이며 추이대인 하천변에서 찾게 되면서 각 지자체에서는 경쟁적으로 많은 공사비를 투입하여 자연형 하천을 조성하였다. 자연형 하천을 조성하기 위해서는 하천이 가지고 있는 다양한 역할을 이해하고, 하천에 대한 올바른 진단과 대안제시를 통해야 함에도 불구하고 세심한 검토가 부족한 상태에서 예산과 건설장비를 투입하고, 조성된 하천을 방치한다면 생명체들이 살아 숨 쉬는 하천으로 되살아나기 어렵다. 따라서 본 연구에서는 내고장 하천을 자연형 하천으로 살리기 위한 기준을 다음과 같이 설정하고 충청북도 내 각 지자체에서 조성한 자연형하천을 평가하여 자연형하천 조성에 대한 업무의 눈높이를 향상시킬 수 있도록 한 것이다. 1) 내 고장 하천 고유의 특성을 산출하고 이에 따른 자연형 하천공법의 추진 2) 하천의 생태복원을 위하여 모니터링을 실시하고, 서식처 보존사업의 추진 3) 주민, 행정부서 간에 하천살리기 실천활동과 거버넌스 행정구현의 추진.

  • PDF

Scene Change Detection in MPEG-1 Video Stream using MAcroblock Information (매크로블록 정보를 이용한 MPEG-1 비디오 스트림의 장면 변화검출)

  • Im, Yeong-In;Nang, Jong-Ho
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.26 no.4
    • /
    • pp.527-537
    • /
    • 1999
  • 비디오 데이터를 이용한 응용 프로그램을 개발하기위해서 비디오 데이터베이슬ㄹ 구축하고자하는 경우에는 비디오의 내용(Content)에 따라 자동으로 장면 변화를 검출(Scene Change Detection)하는 기술이 필요하다. 본 논문에서는 MPEG-1 형식으로 저장된 비디오 데이터에 대하여 장면의 변화를 자동적으로 검출할 수 있는 방법을 제안하고 실험을 통하여 그 유용성을 보인다. 제안한 검출 방법에서는 B 프레임의 각 매크로 블록들에 대하여 시간적으로 과거 B 프레임의 대응되는 매크로블록의 타입과 비교를 하고, 이런 각 매크로블록들에 대한 비교 결과의 합이 입계치보다 큰 경우에 장면이 변한 것으로 판단한다. 제안한 방법에서는 입력 비디오 스트림에서 B 프레임의 매크로블록층 정보만을 이용하여 I프레임과 P 프레임의 장면 변화 검출도 가능하므로 정교한 검출이 가능하다. 또한 이런 검출 방법은 단순히 한 B 프레임안의 매크로 블록개수만을 조사하여 장면 변화여부를 검출하는 기존의 방법에 대하여 각 매크로블록의 타입 정보뿐만 아니라 위치 정보도 이용하기 때문에 장면 변화 검출이 견고하다. MPEG-1 형식으로 부호화한 뉴스 및 영화 비디오 데이터에 대한 실험에 의하면, 본 논문에서 제안한 검출 방법은 95% 이상의 정확성을 보임을 알 수있다. 본 논문에서 제안한 MPEG-1 비디오 장면변화검출방법은 MPEG-1 형식의 비디오 데이터를 이용한 디지털 라이브러리 등의 구축등에 유용하게 사용될수 있을 것이다.

Resonance Scattering Characteristics of Multi-layered Dielectric Gratings under Conical Incidence (원추형 입사에서 다층 유전체 격자구조의 공진 산란특성)

  • Ho, Kwang-Chun
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.22 no.5
    • /
    • pp.123-128
    • /
    • 2022
  • Applying rigorous modal transmission-line theory (MTLT), the properties of resonant diffraction gratings under conical light incidence is investigated. The mode vectors pertinent to resonant diffraction under conical mounting vary less with incident angle than those associated with diffraction gratings in classical mounting. Furthermore, as the evanescent diffracted waves drive the leaky modes responsible for the resonance effects, the conical mounting imbues diffraction gratings with larger angular tolerance than their classical counterparts. Based on these concepts, the angular-spectral and wavelength-spectral performance of resonant diffraction gratings in conical and classical mounts by numerical calculations with spectra found for conical incidence are quantified. These results will be useful in various applications demanding resonant diffraction gratings that are efficient and physically sparse.

SNP Analysis Method for Next-generation Sequencing Data (차세대 시퀀싱 데이터를 위한 SNP 분석 방법)

  • Hong, Sang-kyoon;Lee, Deok-hae;Kong, Jin-hwa;Kim, Deok-Keun;Hong, Dong-wan;Yoon, Jee-hee
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2010.11a
    • /
    • pp.95-98
    • /
    • 2010
  • 최근 차세대 시퀀싱 기술의 급속한 발전에 따라 서열 정보의 해독이 비교적 쉬워지면서 개인별 맞춤의학의 실현에 대한 기대와 관심이 높아지고 있다. 각 개인의 서열 정보 사이에는 SNP (single nucleotide polymorphism), Indel, CNV (copy number variation) 등의 다양한 유전적 구조 변이가 존재하며, 이러한 서열 정보의 부분적 차이는 각 개인의 유전적 특성 및 질병 감수성 등과 밀접한 관련을 갖는다. 본 연구에서는 차세대 시퀀싱 결과로 산출되는 수많은 짧은 DNA 서열 조각인 리드 데이터를 이용한 SNP 추출 알고리즘을 제안한다. 제안된 알고리즘에서는 레퍼런스 시퀀스의 각 위치에 대한 리드 시퀀스의 매핑 정보를 기반으로 SNP 후보 영역을 추출하며, 품질 정보 등을 활용하여 에러 발생률을 최소화한다. 또한 대규모 시퀀싱 데이터와 SNP 구조 변이 데이터의 효율적인 저장/검색을 지원하는 시각적 분석 도구를 구현하여 제안된 방식의 유용성을 검증한다.