• Economic and Environmental Geology
• /
• v.52 no.1
• /
• pp.65-79
• /
• 2019

In this study, simple regression and multiple regression analyses were performed to analyze the relationship between breccia and clay content and shear strength in fault cores. The results of the simple regression analysis performed for each rock (andesitic rock, granite, and sedimentary rock) and three levels of normal stress (${\sigma}_n=54$, 108, 162 kPa), reveal that the shear strength is proportional to breccia content and inversely proportional to clay content. Furthermore, as normal stress increases, the shear strength is influenced by the change in component content, correlating more strongly with clay content than with breccia content. In the multiple regression analysis, which considers both breccia and clay content, the shear strength is found to be more sensitive to the change in breccia content than to that of clay. As a result, the most suitable regression model for each rock is proposed by comparing the coefficients of determination ($R^2$) estimated from the simple regression analysis with those from the multiple regression analysis. The proposed models show high coefficients of determination of $R^2=0.624-0.830$.

• Economic and Environmental Geology
• /
• v.53 no.1
• /
• pp.71-85
• /
• 2020

To understand behavior of fault cores in the field of geotechnical and geological engineering, we present an investigation of the physical properties (breccia and clay contents, unit weight, porosity, and water content) and friction characteristics (internal friction angle and cohesion) of fault cores, in granitic, sedimentary, and volcanic rocks in South Korea. The breccia contents in the fault cores are positively correlated with unit weight and negatively correlated with clay content, porosity, and water content. The inter-quartile ranges of internal friction angles and cohesion calculated from direct shear tests are 16.7-38.1° and 2.5-25.3 kPa, respectively. The influence of physical properties on the friction characteristics of the fault cores was analyzed and showed that in all three rock types the internal friction angles are positively correlated with breccia content and unit weight, and negatively correlated with clay content, porosity, and water content. In contrast, the cohesions of the fault cores are negatively correlated with breccia content and unit weight, and positively correlated with clay content, porosity, and water content.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.4
• /
• pp.265-278
• /
• 2011

Clayey ores of the Jeonnam province mainly consist of pyrophyllite (monoclinic), kaolinite (1T), and minor amounts of quartz, muscovite, and feldspars. Mineralogical studies revealed that two kinds of clay minerals were mainly produced from the volcanic sediments with similar ages and compositions. Kaolinite deposits sometimes contain neither diaspore nor corundum, but alunites are often found in the upper portions of the kaolin ore bodies. On the other hand, corundum and diaspore are commoner in the pyrophyllite deposits than the kaolin deposits. As ages of rock formations are becoming younger, amounts of pyrophyllite and kaolinite are rather radically decreased, and finally disappeared. But muscovite, quartz, and plagioclase feldspars are inclined to be preserved because of weak alteration. Most of clay ore bodies contain purple tuff beds on the uppermost portion, and silicified beds, tuff, and lapillistone are found in an ascending order in the most of clay quarries. Chemical analyses show that higher contents of $Al_2O_3$ might not necessarily be due to the argillization, since some tuffs contain higher $Al_2O_3$ contents originated from feldspars. $SiO_2$ contents are fairly higher in the silicified beds than in those of adjacent formations, which might have been introduced from the ore bodies. And $K_2O$ contents are obviously lower than those of $Na_2O$ and CaO in the ores and their vicinities. Ignition losses of some of clays represent much higher contents than those of the ordinary ones because of the sporadic presence of alunite, diaspore and corundum which are accompanied with lots of $SO_4$ and $Al_2O_3$ contents. REE (rare earth element) abundances of most of volcanics and clay ores show rather higher LREE (light rare earth elements) contents, and represent small to moderately negative Eu anomalies. Though most of ores ususally show milky white color, fine-grained and well bedded formations which could be easily discernible in the most of outcrop. But more distinct characteristics are desirable where rather massive ore bodies exist. Purple tuffs and silicified beds above the ore bodies would be useful as marker horizons/key beds since they have rather obvious lithology, extension and mineralogy than those of other adjacent formations.

• The Journal of the Petrological Society of Korea
• /
• v.22 no.2
• /
• pp.137-151
• /
• 2013

This study is focused on element behaviors and mineral compositions of the fault rock developed in Yongdang-ri, Yangbuk-myeon, Gyeongju City, Korea, using XRF, ICP, XRD, and EPMA/BSE in order to better understand the chemical variations in fault rocks during the fault activity, with emphasis on dependence of chemical mobility on mineralogy across the fault zone. As one of the main components of the fault rocks, $SiO_2$ shows the highest content which ranges from 61.6 to 71.0%, and $Al_2O_3$ is also high as having the 10.8~15.8% range. Alkali elements such as $Na_2O$ and $K_2O$ are in the range of 0.22~4.63% and 2.02~4.89%, respectively, and $Fe_2O_3$ is 3.80~12.5%, indicating that there are significant variations within the fault rock. Based on the chemical characteristics in the fault rocks, it is evident that the fault gouge zone is depleted in $Na_2O$, $Al_2O_3$, $K_2O$, $SiO_2$, CaO, Ba and Sr, whereas enriched in $Fe_2O_3$, MgO, MnO, Zr, Hf and Rb relative to the fault breccia zone. Such chemical behaviors are closely related to the difference in the mineral compositions between breccia and gouge zones because the breccia zone consists of the rock-forming minerals including quartz and feldspar, whereas the gouge zone consists of abundant clay minerals such as illite and chlorite. The alteration of the primary minerals leading to the formation of the clay minerals in the fault zone was affected by the hydrothermal fluids involved in fault activity. Taking into account the fact that major, trace and rare earth elements were leached out from the precursor minerals, it is assumed that the element mobility was high during the first stage of the fault activity because the fracture zone is interpreted to have acted as a path of hydrothermal fluids. Moving toward the later stage of fault activity, the center of the fracture zone was transformed into the gouge zone during which the permeability in the fault zone gradually decreased with the formation of clay minerals. Consequently, elements were effectively constrained in the gouge zone mostly filled with authigenic minerals including clay minerals, characterized by the low element mobility.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.2 no.2
• /
• pp.155-160
• /
• 1969

The soil textures and chemical compositions of Tapes Philippinarum beds were investigated in order to estimate the grade of the habitat soil of T. Philippinarum for the improvement of natural tidal flats. The coefficients of correlation between tile percentages of debris, coarse sand, fine sand, silt, and clay of the habitat soil, and the population density of T. Philippinarum were 0.78, 0.73, -0.42, -0.68, and -0.51 respectively. And the optimum levels of same were above $13.5\%,\;above\;23.0\%\;below\;41.5\%,\;below\;10.0\%$, and below $6.8\%$ respectively The $SiO_2\;Al_2O_3+Fe_2O_3$ ratio of the soil of T. Philippinarum beds showed the range of 5.09 to 5.60. The levels of soil pH, water holding capacity, organic matter, total nitrogen, available phosphorus, exchangeable magnesium were 6.15-6.60, $4.26-6.86\%$, $0.40-1.10\%$ 14.0-27.0 ppm, $0.041-0.394\%,\;and\;0.009-0.132\%$ respectively.

• Economic and Environmental Geology
• /
• v.48 no.2
• /
• pp.103-114
• /
• 2015

Jinsan gold deposit is a hydrothermal vein type deposit consisting of several fissure filling quartz veins developed within the Changri Formation of the Ogcheon Supergroup in Geumsan, Chungnam. This study is to provide an efficient exploration and development strategies based on the characteristics of the geology, geological structure, core logging, and ore vein occurrence and grade for the four pits (New pit, Main pit, Yanghapan pit and Teugho pit). Quartz veins are mostly developed with the strike of $N10^{\circ}-25^{\circ}W$ and $N5^{\circ}-20^{\circ}E$, and the thickness is in the range of 0.1~0.5 m, sometimes extending to over 1m. Although the quartz veins commonly form massive shape, they sometimes show zonal structure, comb structure as well as brecciated texture. Major ore minerals are pyrite and chalcopyrite, and pyrrhotite, sphalerite, galena, marcasite, electrum and chalcocite are also accompanied as minor phases. Gray and milky white quartz veins, which are occasionally crosscut by calcite vein, also include fluorite. Ore evaluations for the 22 samples revealed that the samples from the pits generally have very low Au contents, lower than 1 g/t, but some clay samples of drilled core show very high Au concentrations, up to 141 g/t, indicating that Au content is much higher within fault gouges rather than within fresh quartz veins. This may represent that gold might have been reworked and reprecipitated by hydrothermal fluids in association with reactivation of the faults, and thus suggest that ore occurrence in this deposit is very complex and irregular and therefore more precise and systematic exploration is required.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.3
• /
• pp.223-234
• /
• 2019

The geology of the Samdeok Mo deposit consists of Paleozoic Hwajeonri formation, Kowoonri formation, Suchangri formation, Iwonri formation, Hwanggangri formation, Cretaceous, leucocratic porphyritic granite and granitic porphyry. This deposit consists of three quartz veins that filled NS oriented fractured zones in Suchangri formation. Quartz veins vary from 0.05 m to 0.3 m in thickness and extend to about 400 m in strike length. Quartz veins occur as massive, breccia, and cavity textures. Wallrock alteration has silicification, sericitization, argillitization and chloritization. The mineralogy of the quartz veins consists of quartz, fluorite, white mica, biotite, apatite, monazite, rutile, ilmenite, molybdenite, chalcopyrite, Fe-Mg-Mn oxide and Fe oxide. White mica from Samdeok Mo deposit occurs as fine or coarse grains in quartz vein and hostrock and has four mineral assemblages (I type: quartz, molybdenite, Fe oxide and Fe-Mg-Mn oxide, II type: quartz, Fe oxide and Fe-Mg-Mn oxide, III type: quartz and biotite, and IV type: quartz). The structural formular of white mica from quartz vein is $(K_{0.89-0.60}Na_{0.05-0.00}Ca_{0.01-0.00}Sr_{0.02-0.00})_{0.94-0.62}(Al_{1.54-1.12}Mg_{0.36-0.18}Fe_{0.26-0.09}Mn_{0.04-0.00}Ti_{0.02-0.00}Cr_{0.02-0.00}Zn_{0.01-0.00})_{1.91-1.72}(Si_{3.40-3.11}Al_{0.92-0.60})_{4.00}O_{10}(OH_{1.68-1.42}F_{0.58-0.32})_{2.00}$, but white mica of I type has higher FeO content, and lower $SiO_2$ and MgO contents than white micas of other types. Also, compositional variations in white mica from the Samdeok Mo deposit are caused by phengitic or Tschermark substitution ($(Al^{3+})^{VI}+(Al^{3+})^{IV}{\leftrightarrow}(Fe^{2+}{\text{ or }}Mg^{2+})^{VI}+(Si^{4+})^{IV}$) and direct $(Fe^{3+})^{VI}{\leftrightarrow}(Al^{3+})^{VI}$ substitution.