• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.434-437
• /
• 2016

In this paper, we consider a measurement allocation problem for gathering reliable data from a spatially correlated sensor field. We allocate the probability of each sensor's being measured considering its marginal contribution in entire data gathering; higher measurement probability is given to a sensor that gives higher reilable data. First we establish a correlation model considering limit in each sensor's transmission power, noise in the process of measurement and transmission, and attenutations in wireless channel. Then we evaluate the reliability of gathered data by estimating distortion error in sink node. We model the measurement allocation problem in spatially correlated sensor field into a cooperative game, and quantifiy each sensor's marginal contribution using Shapley Value. Then, the probability of each sensor's being measured is given in proportion to the Shapley Value.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.945-946
• /
• 2007

여러 가닥의 병렬선재에 전류가 흐를 때 각 가닥에 흐르는 전류가 균일한지 알아보기 위해 각 선재의 흐르는 전류를 측정하는 방법으로 홀센서를 이용한 비 접촉식 측정 방법이 있다. 홀센서를 이용하여 전류를 측정하기 위해 4가닥의 병렬선재를 구성하고 일정한 위치에서 자장을 측정하기 위해 센서 홀더를 제작 하였다. 선재에 전류를 흘려주어 발생되는 자장을 홀센서로 측정하였고, 측정된 자장 값을 통해 행렬식을 만들었다. 완성된 행렬식을 이용하여 각 선재에 흐르는 전류 값을 계산하고, 실제 각 선재에 흐르는 전류 측정값과 비교하여 병렬선재에서의 전류분류의 비접촉 측정의 가능성을 살펴본다.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2006.06a
• /
• pp.217-222
• /
• 2006

카오스 로봇의 하드웨어 구현에서 로봇의 자체 또는 바퀴가 정확하기 자기 위치를 인식하고 지시한 방향과 거리만큼 이동하는 것이 가장 중요하다. 본 논문에서는 고정밀 위치 측정이 가능한 카오스 로봇에서의 방위각 센서를 설계하기 위한 VF 컨버터와 방위각 센서를 설계하는 기법을 제시하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.348-354
• /
• 2011

Mobile robots performed various missions in various environments. In order to move to target precisely, the mobile robots need a precise position sensing system In this paper, a new high precision docking sensor is proposed. Proposed docking sensor consists of linear CCD(charge coupled device) sensor and ultrasonic sensors. The docking sensor system can measure lateral position(X), longitudinal position(Y) and angle(${\theta}$) between the sensor and flat target with simple mark. Two ultrasonic sensors measure two distances which can be converted to longitudinal position and angle. Linear CCD sensor measures lateral position using center mark of the target. To verify performance of the sensor, the sensor is applied to an omnidirectional mobile robot. Several experimental results show highly precise performance of the sensor. Repeatability of the docking sensor is less than 1mm and $0.2^{\circ}$. Proposed docking sensor can be applied for precise docking of mobile robot.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.2
• /
• pp.80-85
• /
• 2020

Recently the incidence of musculoskeletal disorders in students and office workers is increasing, and the necessity of maintaining correct posture and corrective training is required, but related research is insufficient. In the previous study, a membrane sensor or a pressure sensor was placed on the seat cushion to see the deviation of the body weight, or a sensor that restrained the user was attached to measure the position change. In this study, a sensor device for detecting a position change in consideration of wearing comfort was developed, and the measured angle was verified through an analysis app. A sensor device consisting of an IMU sensor is attached to the cervical spine and vertebra spine to measure the position transformation in the sitting position. The change value of the position measured by the two sensors was converted into an angle, and the angle value is displayed in real time through the analysis app. In this study, the possibility of measuring the real-time change value according to the change in position, the convenience of wearing, and the tendency of angle measurement were proved. Future research should proceed with more precise angle calculation and correction of motion noise.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.95-102
• /
• 2016

Geomagnetic sensors are widely utilized for sensing heading direction of quadrotors. However, measurement from a geomagnetic sensor is easily corrupted by environmental magnetic field interference and roll/pitch directional motion. In this paper, a measurement method of a quadrotor heading direction is proposed for application to yaw attitude control. In order to eliminate roll/pitch directional motion effect, the geomagnetic sensor data is compensated using the roll/pitch angles measured for stabilization control. In addition, yaw-directional angular velocity data from a gyroscope sensor is fused with the geomagnetic sensor data using a complementary filter which is a simple and intuitive sensor fusion method. The proposed method is applied to experiments, and the results are presented to prove validity and effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.597-599
• /
• 1997

무인 헬리콥터의 자세 정보를 계측할 수 있는 액체형 균형센서의 특성에 대해 연구하였다. 액체형 균형센서는 시간경과에 따른 누적오차가 없으므로 헬리콥터에 장착하면 장시간동안 균형을 유지시킬 수 있다. 제작된 균형센서의 각 전극에서 측정된 전압으로부터 기울어진 각도를 추정하기 위해 균형센서를 전기적으로 해석하고 측정된 전압과 각도사이의 환산모델을 유도하였다. 구해진 환산모델의 정확성을 실험을 통하여 입증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.399-402
• /
• 2017

We consider an sensor partitioning problem for energy-efficient measurement scheduling in a spatially correlated sensor field where sensors are located randomly. We divide the whole sensors into subsets of k sensors in the way of letting each subset give similar amount of mutual information. Then it allows more prolonged life time of the sensor field than measuring the sensors that gives most information only. To this end, we compute the Shapley value of each sensor and compose the subsets so that each subset can have total Shapley value similar with the other subsets.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2006.06a
• /
• pp.223-228
• /
• 2006

카오스 로봇의 하드웨어 구현에서 로봇의 자체 또는 바퀴가 정확하기 자기 위치를 인식하고 지지한 방향과 거리만큼 이동하는 것이 가장 중요하다. 본 논문에서는 고정밀 위치 측정이 가능한 카오스로봇을 제작하기 위하여 기존의 마그네틱 자이로 센서가 가지고있는 문제점인 주변의 자성의 영향으로 정확한 자기 위치를 확인할 수 없어 새로운 각 속도 센서를 사용하여 자기 위치 보정능력을 향상시키고 정확한 방향을 움직일 수 있는 카오스 로봇을 설계하였다.

• Journal of the Korean Magnetics Society
• /
• v.24 no.1
• /
• pp.22-27
• /
• 2014

North indicating azimuth angle sensors have been used in airplanes, ships traditionally and nowadays employed in smart phones. For the azimuth and roll angle measurement of the sensor, 3-axis acceleration sensor was added to the 3-axis magnetic field sensor. In this work, we have constructed a measuring system for the measurement of the magnetic field and the angle uncertainty of the magnetic field sensors. Measuring system could be useful not only in non-magnetic laboratory but also in normal laboratory, we constructed small size of 3-axis Helmholtz coils for the compensation environment magnetic field (Earth magnetic field and magnetic field from building) and the generation of magnetic field for the test of magnetic field sensor. The constructed measuring system could compensate environment magnetic field below 10 nT level and generate 3-dimensional magnetic field with magnitude uncertainty of 0.2 % and angle error of $0.2^{\circ}$ within the volume of ${\pm}30mm$ diameter at center of Helmholtz coils. For the conformation of developed measuring system, We tested commercially available 3-axis magnetometer and heading sensor.