• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.221-228
• /
• 2020

A sonobuoy is dropped onto the surface of water to estimate the bearing of an underwater target. A Directional Frequency Analysis and Recording (DIFAR) sonobuoy has an error in the specific angular section due to the method of estimating bearing and noise, which causes an error in target localization using multiple sonobuoys. In addition, the position of the sonobuoy continues to move, but since a sonobuoy with a GPS is intermittently arranged, it is difficult to estimate the exact position of the sonobuoy. This also causes target localization performance degradation. In this paper, we propose a technique to improve the target localization performance by compensating for bearing errors using characteristics of the DIFAR sonobuoy and multiple-sonobuoy position errors based on the intermittently arranged active sonobuoy with a GPS.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.71-78
• /
• 2011

In this paper, the effect of parameter errors to the estimation of the rotor angle in sensorless operation of a permanent magnet synchronous motor is analyzed. The angle error information which is utilized to estimate the rotor position can be classified into two factors, namely, the sign factor and the gain factor. This paper particularly focuses on parameter errors reflected in the sign factor of the angle error information which causes a deviation in the angle estimation. In this paper, mathematical expressions describing the deviation of the angle estimation due to the inductance error and the resistance error in the sensorless control are derived. The validity of the expression is verified by the computer simulations and the experimental results.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.130-136
• /
• 2012

In this paper, we propose a near-field range estimation method for a uniform linear array that can calibrate bearing estimation error which give a bad influence on a range estimation process. When a range is fixed, the bearing error is calibrated to maximize the beamformer output by the proposed algorithm based on the gradient method. Simulation results show that the proposed algorithm can compensate the bearing error which is less than the mainlobe beamwidth so that reduce the range estimation error as similar as the case of no bearing error.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.24-29
• /
• 2009

Sound source localization system is used in a robot, a video conference and CCTV(Closed-circuit television) systems. In this Sound source localization systems are applied to human and they can receive a number of sound data frames during speaking. In this paper, we propose methods which is reducing angle estimation error by selecting sound data frame which can more precisely compute the angles from inputted sound data frame. After selected data converted to angle, the error of sound source localization recognition system can be reduced by applying to medium filter. By the experiment using proposed system it is shown that the average error of angle estimation in sound source recognition system can be reduced up to 31 %.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.950-952
• /
• 2012

음원 위치추정 시스템은 일반적으로 여러 개의 마이크에서 수집된 음원의 시간 간격을 이용해 음원의 위치를 추정하는 방식을 적용한다. 본 논문에서는 감시카메라에 적합한 4개의 마이크로폰을 이용한 음원 위치추정 시스템에서 마이크로폰에 수신된 음원의 도착순서를 이용해 음원의 위치를 추정하는 알고리즘을 제안하였다. 제안한 알고리즘을 시뮬레이션 프로그램을 통해 검증한 결과, 음원 추정각도의 오차는 $2^{\circ}{\sim}11.25^{\circ}$로 확인되었으며, 이는 실제각도의 오차범위인 $0^{\circ}{\sim}22.5^{\circ}$ 내에 해당하기 때문에 추정각도의 오차가 최대로 발생하더라도 음원이 발생한 위치를 파악 할 수 있음을 의미한다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.463-466
• /
• 2000

SAR imaging 시스템 전파환경에서 목표물의 정보를 성공적으로 추출해 내기 위해서는 반사된 신호를 수신할 때 Coherent detection이 필수적이다. 수신시 Incoherent detection은 복소 위상오차 형태로 나타나서 실제 목표물의 영상에 심각한 Degradation을 야기시켜 치명적인 결과를 초래하게된다. 본 논문에서는 하나의 목표물에서 수신되는 신호를 파동방정식으로부터 모델링하고 모델링된 신호의 각 주파수대의 조합에 의해 전체 수신신호로부터 위상오차의 기울기를 유도한다. 더욱더 정확한 위상오차를 추정하기 위해 추정된 위상오차로부터 수신신호에 포함된 오차를 제거하고, 오차가 제거된 신호의 대역폭을 추정한다. 추정된 대역폭에 맞도록 알고리즘에 재 적용시켜 교정되지 못한 오차를 추정해 나간다. 이때 반복적인 위상오차 제거기법을 적용하고 Iteration의 종료를 자동으로 결정하기 위해 지능형 대역폭 추정 기법을 제시한다. 컴퓨터의 모의 실험에서, 위상오차를 포함한 수신 신호로부터 알고리즘을 적용하여 오차를 제거하고,, Wavefront Reconstruction 기법에 적용시켜 알고리즘의 성능을 영상으로 확인한다.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.412-421
• /
• 2018

The Line array sonar consisting of several hydrophones increases array gain and improves the performance for detecting the direction of the target compared to single hydrophone. However, line array sonar produces the bearing error that makes it difficult to determine the bearing of incoming source signal due to the relation between bearing angle of target and vertical angle of multipath signals. Vertical angles of multipath are varied with the geometry of receiver and target and various underwater environments, therefore it is necessary to consider the bearing error to estimate accurately the bearing of the target. In this study, acoustic modelling was performed to understand the effect of multipath signals on the target signal. The errors of bearing angle estimated from the bottom bounced signals are calculated with several environment. In addition, the expected bearing line, as a function of source-receiver range, compensated for the bearing error is predicted from the estimated bearing angle.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.11-17
• /
• 2009

This paper deals with the estimation performance DoA (Direction of Arrival) using the 3D adaptive array antenna in W-CDMA signal. For this, we proposed the 5 types of 3D array antenna, and appied for the MUSIC in order to the estimation of DoA algorithm for that antenna, commonly, then the DoA estimation error was used for the estimation performance. In the mobile communication and radio positioning service, performing the spatial filtering after the DoA estimation in array antenna, the quality of receiving signal can improve by the nulling or minimization of interfering signal which is from the undesired direction and the forming of beam which is from the desired direction. The result of DoA estimation and the DoA estimation error by varying the signal to noise ration and the number of interfering signal and power of each type antenna was calculated by computer simulation. As a result of simulation, the other propose antenna has good performance excluding the stack 3D antenna in DoA estimation and the Curved-B type antenna has more superior performance when increasing the number of interfering signal and power in the DoA estimation error.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.837-839
• /
• 2014

In radar systems, information of three-dimensional (3D) trajectory is necessary for tracking targets. The information of 3D trajectory for a 3D radar can be obtained by estimating the azimuth angle, the elevation angle, and the distance. The estimated information of the angles and the distance has errors according to received signals. Since these errors affect performances of 3D radar systems, performance analysis of 3D radar for the angles and the distance errors is required. In this paper, the performance of 3D radar systems is analyzed by root mean square error (RMSE) between true trajectory information and the estimated trajectory information according to the angles and the distance errors.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10a
• /
• pp.18-20
• /
• 1999

히스토그램은 데이터베이스 질의 최적기가 사용하는 통게정보 중의 하나이다. 최근에는 데이터베이스의 크기가 기하급수적으로 커짐에 따라, 데이터의 전체적인 성향을 빠르게 파악할 수 있는 방법의 하나로 히스토그램으로 활용하는 방안이 고려되고 있다. 그를 위해서, 히스토그램에서 얻어진 근사값의 오차를 추정할 수 있는 방법이 요구되었다. 기존의 기법에서는 히스토그램의 각 버켓에 실제 빈도와 평균 빈도의 최대차를 추가하고, 이 값을 이용하여 오차추정을 하였다. 그러나, 이 값이 히스토그램 버켓의 전체적인 데이터 분포를 잘 반영하지 못하기 때문에 실제 오차에 근접한 오차 추정을 할 수가 없는 단점이 있었다. 본 논문에서는 이를 극복하기 위해, 히스토그램에 데이터의 분포를 잘 반영하는 정보 즉, 평균값, COUNT/SUM 연산에 대한 최대 오차를 추가하였다. 이 정보들을 이용하여 실제 오차에 보다 근접한 오차 추정을 할 수 있었으며, 부가적으로 SUM/AVG 연산에 대한 보다 정확한 근사값을 얻을 수 있었다.