• Elastomers and Composites
• /
• v.3 no.1
• /
• pp.62-74
• /
• 1968

천연(天然)고무 및 합성(合成) 고(高) cis 1 : 4 polyisoprene, 대표적(代表的)으로 'Natsyn 400'의 가공(加工), 배합(配合) 또는 가황체(加黃體)의 성질(性質)들의 차이점(差異點)들에 대(對)하여 설명(說明)하였다. 합성중합체(合成重合體)는 미리 소연(素鍊)함이 없이 충전제(充塡劑)를 첨가(添加)함으로서 가공(加工)이 용역(容易)하였으며 CV형(形) 천연(天然)고무에 있어서도 이점(利點)이 나타났다. 천연(天然)고무 배합물(配合物)은 점착성(粘着性)이 좋으며, 특(特)히 미가황물(未加黃物)의 강도(强度)가 현저(顯著)하게 우수(優秀)하다. 가황과정(加黃過程) 및 몇몇가황체(加黃體)의 성질(性質)에 있어서의 차이(差異)는 비(非)고무질(質)을 함유(含有)하지 않는 Natsyn으로 나타난다. 기타(其他)의 가황체성질(加黃體性質)의 차이(差異)는 천연(天然)고무에 있어서 그 가황체(加黃體)가 인장시(引張時)에 결정(結晶)하는 경향(傾向)을 크게 나타내고 있고 특(特)히 고온(高溫)에서 이들 차이(差異)가 현저(顯著)하다.

• Elastomers and Composites
• /
• v.35 no.4
• /
• pp.303-310
• /
• 2000

Low temperature retraction characteristics were investigated on the cured natural rubber with various ratios of crosslinking agents, filler and additives. The cured natural rubber product was elongated about 200% at $-40^{\circ}C$ for 24 hours and then retracted. In a definite range, the retraction was increased as the sulfur to accelerator ratio increased and as the filler contents decreased. The retraction was maximum for a definite range of amount of accelerators, plasticizer and activator. Adding some peroxide additively retraction characteristics improved and curing time got longer.

• Elastomers and Composites
• /
• v.21 no.1
• /
• pp.13-19
• /
• 1986

The effects of several vulcanizing accelerators on the determination of kinetic parameters of natural rubber vulcanizate was studied by DSC. Kinetic parameters were determined by means of the calculation procedures of Borchardt-Daniels and Oscillating Disk Rheometer (ODR) cure curve analysis, using both DSC exothermal thermogram and ODR cure curve. In order to examine the credibility in the DSC method the same compound which was und for DSC method was used for the comparison with the results of ODR data. Upon this method, kinetic rate constant (k), and Arrehenius parameter (Ea, ko, n) have been determined for rubber compounds via a new method using DSC thermogram and ODR cure curve. In the comparison of DSC and ODR results, kinetic parameters has shown good agreements between two results. Consequently, from the present studies, it is shown that the DSC thermoanalytical method can provide an alternate new method of kinetic study of rubber vulcanization.

• Elastomers and Composites
• /
• v.8 no.2
• /
• pp.131-139
• /
• 1973

• Elastomers and Composites
• /
• v.9 no.1
• /
• pp.19-31
• /
• 1974

• Elastomers and Composites
• /
• v.9 no.2
• /
• pp.65-73
• /
• 1974

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.220-227
• /
• 2000

Silica and carbon black filled natural rubber (NR) vulcanizates were prepared with different mixing modes and amounts of fillers. Curing characteristics, morphology. and tear properties of the NR vulcanizates were investigated. The NR vulcanizates filled with silica and carbon black sequentially showed longer induction time ($t_2$), cure index ($t_{90}$ ), and lower maximum torque ($T_{max}$ ) than the NR vulcanizates filled with them simultaneously, during curing process. The former showed superior dispersion of fillers and tear properties to the latter. The NR vulcanizates containing 30 phr of silica showed excellent properties in the experimental range.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.269-275
• /
• 2013

Thiuram (DPTT, TMTD), thiazole (MBT, MBTS), sulfenamide (CBS, NOBS), and zinc containing thiuram (dithiocarbamate) (ZDBC) type accelerators were added into silica and carbon black filled natural rubber (NR) compounds. Their effects on vulcanization time and rate were compared. The vulcanization rate of thiuram type accelerator added compounds showed the fastest rate, followed by thiazole and sulfenamide types. Silica filled natural rubber (NR) compounds showed a slower vulcanization time ($t_{s2}$, $t_{10}$, $t_{90}$) and lower cure rate index (CRI) than carbon black filled ones upon each accelerator.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.144-148
• /
• 2011

Various types of accelerators, thiuram (TMTD), thiazole (MBTS), and sulfenamide (CBS) are added into a silica filled natural rubber (NR) compound. Their effects on vulcanization properties are also investigated. TMTD shows a fast vulcanization rate and a higer maximum torque ($T_{max}$), as well as excellent mechanical properties (hardness, 300% modulus, tensile strength, elongation). MBTS shows a moderate vulcanization rate, a lower $T_{max}$, and mechanical properties. Finally, CBS shows a slow vulcanization rate but excellent mechanical properties. The same vulcanization trend can be found in carbon black filled NR compounds.

• Journal of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.359-366
• /
• 1971

The extended Huckel calculations on five organic accelerators of vulcanization have been carried out. Various MO quantities e.g., electron populations and AO coefficients, are used to explain accelerator reactivity of the compounds. Results of these analyses lead us to support free radical mechanism of acceleration in vulcanization.