• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.4
• /
• pp.27-35
• /
• 2000

강한 지진 하에서 효율적으로 거동하도록 유도하는 연구중의 하나로서 개구부를 가진 합성보의 이력거동을 조사하고 있다. 직사각형 개구부를 가진 합성보에 대한 연구를 발전시켜 에너지 소산능력이 보다 큰 달걀형 개구부를 가진 합성보에 대한 연구를 수행하였다. 실험적 연구와 비선형 FEM 해석 연구 모두가 그러한 합성보의 연성도를 입증하였다. 본 연구는 달걀형 개구부를 가진 합성보의 강도와 초기강성도를 산정하는 약산식을 제시하였고, 그 결과를 실험 및 비선형 FEM 해석의 결과와 비교 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.777-789
• /
• 1990

본 연구에서는 비교적 저가인 소형 컴퓨터(IBM-AT급) 및 주변 장치를 이용하 는 다점가진 모우드해석 시스템의 개발과 관련된 신호 수집, 다차원 스펙트럼 해석법 에 의한 주파수 응답함수 행렬의 계산, 곡선 피팅에 의한 후처리 문제등을 소개하고, 모의실험(simulation) 및 실제 가진실험을 통하여 개발된 시스템의 실용화 가능성을 검토하였다.

• 전기의세계
• /
• v.28 no.7
• /
• pp.56-59
• /
• 1979

평면구조를 가진 고내압 다이오드를 Guard ring을 사용하여 제작하고 다이오드의 파괴전압이 최대가 되는 Guard ring의 최적위치를 실험적으로 구하였다. 측정된 파괴전압은 Guard ring을 사용하지 않은 경우에는 550volt이었고 Guard ring을 사용한 경우에는 1,000volt까지 증가시킬 수 있었다.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.11
• /
• pp.27-37
• /
• 2007

Downhole seismic method is very economic and easy to operate because it uses only one borehole and simple surface source to obtain the shear wave velocity profile of a site. In this study, automatic shear wave source was developed for efficient downhole seismic testing. This source is motor-spring type and easy to control. It can lessen the labor of operator and the working time. Moreover, it can provide better and repetitive signals for data interpretation. By combining developed automatic source with automatic receiver system, PC based data acquisition system, advanced managing program, and semi-automatic downhole performing system were constructed. Through comparison test with manual source, advantages of automatic source were verified. Constructed semi-automatic downhole testing system including automatic shear wave source was applied to the soft soil site. The applicability and reliability were verified and the importance of automating testing system for obtaining reliable result was emphasized.

• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.77-83
• /
• 2021

The purpose of this study was to determine whether the convergence pulmonary function of the 20s men of mild intellectual disabilities with obesity to tredmill exercise. Ten subjects of mild intellectual disabilities with obesity(experimentals) and ten contrary subjects(controls) were participated in the experiment. experimental group conducted treadmill gait training and control group conducted automed exercise. Subjects were assessed for their respiratory function by using Fit mate. The result of the experiments showed high pulmonary function than the controls. Thus, it suggests that the respiratory functional data of 20s men of mild intellectual disabilities with obesity can be used as a various respiratory one for the exercise programs in the area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.193-201
• /
• 1993

Experimental investigation of nonlinear instability of deep-water wave train is performed. Two-dimensional Benjamin-Feir type wave instability and breaking are observed at wave steepness between 0.19 and 0.25 and three-dimensional instability and breaking at wave steepness greater than or equal to 0.31. At the same wave steepness, shorter waves with smaller amplitude are more unstable, with earlier occurrence of breaking, than long waves with large amplitude.

• Journal of Power System Engineering
• /
• v.5 no.1
• /
• pp.27-34
• /
• 2001

관 외벽에 낮은 핀을 가진 수직 및 경사 열사이폰의 열전달 성능에 관한 실험적인 연구를 하였다. 관 외벽에 낮은 핀을 가진 이상밀폐 열사이폰의 열전달 성능을 비교 분석하기 위하여 동일한 규격의 평관에서도 실험적인 연구를 하였다. 작동유체는 증류수와 CFC-30을 사용하였다. 열사이폰의 경사각과 자동온도를 변화시키면서 실험한 결과 경사각의 변화에 따라 열사이폰의 열전달 성능은 큰 변화를 나타내었다. 그리고 평관으로 제작한 열사이폰보다 관 외벽에 낮은 핀관을 가진 동관으로 제작한 열사이폰의 열전달 성능이 높게 나타났다. 그리고 열사이폰의 경사각이 $20{\sim}50^{\circ}$ 범위에서 열전달 성능이 높게 나타났다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1021-1027
• /
• 2006

Torque fluctuation of an engine and angular velocity variation of a propeller shaft are the main excitation sources in the vehicle driveline. This paper presents brief mechanism of these excitation sources. Equivalent models of these systems are construced to simulate the excitation source. The computer simulation was carried out by ARLA Simul v 6.7 and ARLA-Simstat v 2.3. Results of the simulations show the characteristics of torsional excitation source of the driveline. Experimental setups for engine system and propeller shaft system are constructed with component of the vehicle. Torque fluctuation of the flywheel and angular velocity of the propeller shaft were measured from this experimental setups. Experimental results are compared with simulation results. The results from experimental analysis agree with those from theoretical results.

• Elastomers and Composites
• /
• v.39 no.2
• /
• pp.121-130
• /
• 2004

A rubber bushing connects the components of the vehicle each other and reduce the vibration transmitted to the chassis frame. A rubber bushing has the nonlinear characteristics for both the amplitude and the frequency and represents the hysteretic responses under the periodic excitation. In this paper, one-axis durability test is performed to describe the mechanical behavior of typical vehicle elastomeric components. The results of the tests are used to develop m empirical bushing model with an artificial neural network. The back propagation algerian is used to obtain the weighting factor of the neural network. A numerical example is carried out to verify the developed bushing model and the vehicle simulation is performed to show the fidelity of proposed model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.535-542
• /
• 2010

Precise estimation of a structure's dynamic characteristics is indispensable for ensuring stable dynamic responses during lifetime especially for the structures which can experience resonance such as railway bridges. In this paper, the results of forced vibration tests of different excitation methods (vibration exciter and impact hammer) are compared to examine the differences and the cause of differences of extracted natural frequencies. Consequently a natural frequency modification method is suggested to eliminate effects of non-structural disturbance factors. Also, sequential forced vibration tests are performed before and after track construction according to the construction stage of a railway bridge, and the variation of natural frequencies are examined. Effect of added mass of vibration exciter and variation of support condition due to the level of excitation force are concluded as the major cause of natural frequency differences. Thus eliminating these effects can enhance the reliability of the extracted natural frequencies. Construction of track affects not only the mass of structure but also the stiffness of the structure. Also, the amount of increase in stiffness varies according to the level of structural deflection. Therefore, reasonable estimation of the level of structural response during operation is important for precise natural frequency calculation at design phase.