• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.88-94
• /
• 2005

This paper presents the design and implementation of a receiver operating between a rotary machine encoder and DSP. The receiver connects with the encoder using 1 bit serial data and DSP using 16 bits bus line. The receiver and encoder use the different operating frequency each other. We suggest a new apparatus and method of synchronized code for header detection in 1bit serial communication. The system operating frequency can be changed into 20MHz or 60MHz by using the external port such as 'clk_select'.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.241-250
• /
• 2000

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and synchronizations and secure communication of a lossy equivalent transmission are investigated. Since the synchronization of the lossy equivalent transmission system is impossible by coupled synchronization, theory having both the drive-response and the coupled synchronization is proposed. The proposed method is synthesizing the desired information with the chaos circuit by adding the information signal to the chaos signal in the lossy equivalent transmission system.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.297-303
• /
• 2002

배 골판지 포장상자의 진동특성을 계측, 분석하기 위하여 유압가진기을 이용하여 단일 포장상자의 진동실험 및 적재된 포장상자의 진동실험을 위한 시스템을 구성하고 진동특성 계측용 컴퓨터 프로그램을 개발하며 진동실험을 하였으며, 그 결론은 다음과 같다. 1. 유압가진기의 성능실험을 하여 배 골판지 포장상자의 진동실험에 적합한 것으로 나타났다. 2. 단일 배 골판지 포장상자의 피크 주파수는 27.02 Hz이었으며, 피크 가속도는 1.9 G이었다. 3. 적재된 배 골판지 포장상자와 적재 단수별 피크 주파수는 19.02, 18.14, 16.62 및 15.40 Hz이었으며, 피크 가속도는 2.2987, 3.7654, 5.6087 및 7.9852 G이었다. 4. 배의 경우에는 운송시 과도한 진동에 노출되어 손상을 입게 되는데 만약 골판지 상자안의 배가 팰리트 적재로 운송시 15∼20 Hz 주파수 대역의 진동을 하게 되면 포장상자의 최하단에서부터 최상단까지 가속도와 변위가 증가되어 배의 심각한 멍(bruise) 손상을 초라하게 된다. 5. 배 골판지 포장상자의 진동시 최하단의 상자의 경우에는 상단에 위치한 상자로부터 진동에 의한 압축력을 받아 배의 손상 원인이 되었다. 이것은 농산물이 유통중의 진동에 노출되었을 때 농산물의 손상은 최하단의 골판지 포장상자의 압상의 원인이 제일 크다는 것을 알 수가 있었다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.3
• /
• pp.57-63
• /
• 2005

Kim and Fenn et al. proposed two modular AB multipliers based on LFSR(Linear Feedback Shift Register) architecture. These multipliers use AOP, which has all coefficients with '1', as an irreducible polynomial. Thereby, they have good hardware complexity compared to the previous architectures. This paper proposes a modular $AB^2$ multiplier based on LFSR architecture and a modular exponentiation architecture to improve the hardware complexity of the Kim's. Our multiplier also use the AOP as an irreducible polynomial as the Kim architecture. Simulation result shows that our multiplier reduces the hardware complexity about $50\%$ in the perspective of XOR and AND gates compared to the Kim's. The architecture could be used as a basic block to implement public-key cryptosystems.

• Journal of Aerospace System Engineering
• /
• v.12 no.2
• /
• pp.30-36
• /
• 2018

In this study, a small-scaled test system for a tip jet rotor was developed to contribute to the research on unmanned compound rotorcraft. The performance and dynamic characteristics of the tip jet rotor were investigated using the test system. The diameter of the tip jet rotor was set to 2m in consideration of the size of the test site and the pneumatic supply capacity of the. The rotating speed of the rotor was controlled by the pressure of the compressed air. The thrust and forces during the rotor rotation were measured using a load measuring device. A hydraulic actuator was installed for the dynamic test and full-bridge strain gages were attached to the root of each blade to measure the flap, lag, and torsion-wise responses generated when the rotor is excited by the actuator. The performance and dynamic characteristic tests were conducted at various rotor speeds and blade pitches. In order to check the validity of the test results, the results were also compared with the CAMRAD II analysis.

• Journal of Biomedical Engineering Research
• /
• v.22 no.2
• /
• pp.165-169
• /
• 2001

최근 포항 방사광 가속기 연구소에 미세구조 X-선 영상 실험을 위한 5C1 방사광(Synchrtoron Radiation) 빔라인이 건설되었다. 광대역의 에너지 스펙트럼을 가진 방사광 X-선이 물체를 투과한 후 CdWO$_{4}$ scintillator에 의해 가시광선으로 바뀌고, 그 빛을 CCD 카메라로 받아들여 영상을 획득하게 된다. 방사광 X-선은 일반 의료진단용 X-선에 비하여 위상이 일치하고, 평행하며, 그 양이 풍부한 특성들을 갖고 있다. 방사광 영상시스템과 X-선 유방촬영 시스템에서 영상을 획득하여 영상특성들을 비교, 분석하였다. 고-분해능 X-선 시험 패턴(20 line pairs mm$^{-1}$), 유방촬영 팬텀, 파라핀에 고정한 인체 유방암조직과 포르말린에 고정한 인체 유방암조직, 그리고 capillary tube내 micro-bubbles등의 방사광 영상은 기존의 X-선 유방촬영시스템에서 얻은 영상보다 분해능이 뛰어나고 영상질도 우수하였다. 방사광 X-선 영상시스템은 micrometer 공간 분해능 영상을 획득할 수 있어 많은 기초분야의 영상연구와 의료영상분야에서도 활발하게 활용될 것으로 기대된다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.208-213
• /
• 2013

The problem of finding control laws for underactuated systems has attracted growing attention since these systems are characterized by the fact that they have fewer actuators than the degrees of freedom to be controlled. A sliding mode control based on the theory of variable structure systems is a robust methodology to control nonlinear systems. In this paper, a sliding mode control with integral sliding function is proposed and asymptotical stability is proved in the Lyapunov's sense for underactuated systems. In order to verify the effectiveness of the proposed control, computer simulations for an acrobot, which is a representative underactuated system, are performed. Using Mathworks' Simulink/Simscape, the acrobot dynamics is implemented and the proposed control is composed. Simulations demonstrate the effectiveness and usefulness of the proposed control.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.43-50
• /
• 2000

Design and experiments of a nondestructive testing system with a solenoid eddy current sensor to inspect deterioration of ASCR-OC (ACSR Outdoor Cross-linked Polyethylene Insulated Wires) usually used in HV overhead distribution lines in domestic areas in presented in this paper. Through corrosion mechanisms and deterioration results for ACSR-OC conductors are examined, it is shown that corrosion may lead to the reduction of the effective cross section area of conductors is proposed. The measurement system consisting of a constant current source with a RF frequency, a signal processing unit and a motor driver/ controller is designed and implemented. This instrument has such capabilities as detecting the sensor output and estimating diameter change of the testing conductors, continuously. As a result, it was verified that such corrosion detector system with an eddy current sensor can be shown good effectiveness for estimating the serious faults due to deterioration in overhead distribution lines and giving an early warming before severe aged conductor may lead to fail.

• Journal of Aerospace System Engineering
• /
• v.11 no.6
• /
• pp.84-91
• /
• 2017

The dynamic characteristics of a ducted fan in hovering condition were investigated. The section properties of the fan blade were calculated, and a simulation model was developed according to the rotor system components. Dynamic analyses were conducted relative to the rotational speed and the collective pitch. The proposed ducted fan system showed less aero-elastic instability within the designated operating ranges. To verify the analytical approach, a rotating test stand of the ducted fan was set up. A functional test of the assembly was carried out to determine the kinematics and interference between components. The non-rotating and rotating normal frequencies were measured by excitation of the collective pitch using hydraulic actuators. The results indicated a correlation between the test equipment and the simulation model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.537-537
• /
• 2010

이 논문에서는 음향 임피던스를 제어하는 능동형 소음 제어 방법을 연구하였다. 관의 끝단에 스피커를 이용하여 음향 임피던스를 제어하게 된다. 음향 임피던스 제어는 음향의 반사를 최소화 하는 제어 방법을 이용하는 것으로, 닫힌 관의 끝단에 음파의 흡수와 반사를 제어한다. 나아가 음향 임피던스 제어 방법은 관의 중앙에 설치되어 적용된다. 이 경우에는 음향의 반사, 흡수 및 전달이 측정되고, 최소화하기 위한 임피던스가 계산된다. 이를 위해 가진기, 마이크로폰, 진동측정용 레이저 바이브로미터, 그리고 능동 소음 제어 하드웨어로 구성된 시스템을 구축하고 검증하였다.