• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.9 s.339
• /
• pp.29-34
• /
• 2005

This paper describes a novel internal clock generator, called duty cycle-corrected analog synchronous mirror delay (DCC-ASMD). The proposed circuit is well suited for dual edge-triggered systems such as double data-rate synchronous DRAM since it can achieve clock synchronization within two clock cycles with accurate duty cycle correction. To evaluate the performance of the proposed circuit, DCC-ASMD was designed using a $0.35\mu$m CMOS process technology. Simulation results show that the proposed circuit generates an internal clock having $50\%$ duty ratio within two clock cycles from the external clock having duty ratio range of $40\;\~\;60$.

• Annual Conference of KIPS
• /
• 2000.10b
• /
• pp.923-926
• /
• 2000

부품영상이 가지고 있는 특징을 잘 반영하기 위해서는 많은 양의 정보가 필요하며, 대부분 기존의 부품영상 분류 시스템들은 가지고 있는 영상들에 대하여 각각의 특징정보를 직접 비교해야 했다. 따라서 부품영상의 종류가 많을 수록 많은 계산량이 요구된다. 이러한 단점을 개선하기 위하여 본 논문에서는 주파수 영역 기반의 계층적 부품영상 분류 시스템을 제안한다. 본 논문에서 제안한 시스템은 부품영상의 주파수 성분을 분해하여 계층적으로 구성되어 있는 분류기에 입력한다. 본 시스템은 주파수 영역을 바탕으로 계층구조를 유연하게 조정할 수 있으며 분류에 필요한 전체적인 계산량을 줄일 수 있다. 190 종의 부품영상 1,900 개를 본 시스템에 적용하여 실험한 결과, 높은 검색율을 유지하면서 비계층적인 구조를 가진 시스템에 비하여 약 4배 정도의 속도향상을 얻을 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2479-2481
• /
• 2001

오프라인에서만 가능했던 일들이 인터넷 속도의 향상으로 온라인을 통한 실시간 제어가 가능해지고 있다. TCP/IP를 기반으로 이루어지는 경우 대개 소켓을 이용한 PC기반에서 해석되어 지고 처리되어 진다. 본 논문에서는 PC기반의 원격제어 시스템을 임베디드화하여 온실시스템에 적용해 봄으로써 시스템의 안정성과 효율성에서 우수한 시스템을 구현하려고 한다. 이를 위하여 임베디드 시스템은 웹서버의 기능을 가진 HelloDevice 1300보드를 이용하였다. 실질적인 제어물의 제어를 위해서 제어기를 HelloDevice 1300보드와 시리얼을 통하여 통신하였다. 이와 같은 시스템을 구현하여 온실시스템의 자동화에 관한 실효성을 검증하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.679-683
• /
• 2013

BSR noise emerges in a vehicle as a result of road vibrations, engine vibrations, and speaker vibrations. BSR noise occurs with an irregular impact or stick slip friction phenomenon as the influence of the resonance mode when the vibration input load is transferred along poor joint and contacting pairs of the system. A sub-structure method of finite element analysis is required to detect impacts and slip in the full vehicle model. This study presents a method for sub-structure modeling and a rattle and squeak detection methodology that considers the characteristics of road vibration inputs.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.1
• /
• pp.7-16
• /
• 2004

The tool path needs to be determined in an efficient manner to generate the final NC (numerical control) code for efficient machining. This is particularly important in machining free form pockets with an arbitrary wall geometry on a three-axis CNC machine. Many CAD/CAM systems use linear interpolation to generate NC tool paths for curved surfaces. However, this needs to be modified to improve the smoothness of the machined bottom surface, reduce machining time and CL (cutter location) file size. Curved machining can be a solution to reduce these problems. The unified rough and finish cut algerian and the tool motion is graphically simulated. In this paper, a grid based 3D navigation algorithm for generating NC tool path data for both linear interpolation and a combination of linear and circular interpolation for three-axis CNC milling of general pockets with sculptured bottom surfaces is developed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.459-467
• /
• 2016

Recently, new open-cut modular construction method, which is built within a 5~7m depth below the road, was proposed for the near-surface transit system to ensure the economic feasibility of underground structures. In this paper, the precast modular construction method was developed for the low-cost and rapid construction of underground structures. For the experiment on the flexural performance of the modular slab connections, a total of eleven specimens were fabricated according to the test variables; section shape, joint type, lap length, and transverse reinforcement. The test results were compared with those of the specimens without loop joints. To verify the performance of the slab connections, the 4-point loading tests of precast RC members with loop joints were conducted. As a result of the test, the flexural performance of the half-depth specimens with a 200mm lap length of loop joints were confirmed to be similar to those of the specimens without joints.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.7_8
• /
• pp.341-351
• /
• 2003

For debugging effectively the shared-memory programs with nested parallelism, it is important to detect efficiently the first races which incur non-deterministic executions of the programs. Previous on-the-fly technique detects the first races in two passes, and shows inefficiencies both in execution time and memory space because the size of an access history for each shared variable depends on the maximum parallelism of program. This paper proposes a new on-the-fly technique to detect the first races in two passes, which is constant in both the number of event comparisons and the space complexity on each access to shared variable because the size of an access history for each shared variable is a small constant. This technique therefore makes on-the-fly race detection more efficient and practical for debugging shared-memory programs with nested parallelism.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.418-426
• /
• 2003

To show a retina shape and thickness on the computer monitor, a laser has been used in Scanning Laser Ophthalmoscope(SLO) equipment using the traveling difference. This method requires exact synchronous control of laser traveling in optic system to show a clear 3-dimensional image of retina To obtain this image, this exact synchronism is very important for making the perfect plane scanning. In this study, a high speed and synchronous control of the galvanometer to make 3-dimensional retina image is presented. For the more, deadbeat load torque observer is added to the PI controller for compensation of the position error arisen in the high speed control. As a result, the proposed control system has a robust and precise response against the load torque variation appeared in high speed control. A stability and usefulness are verified by the computer simulation and the experiment.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2031-2033
• /
• 2002

고 배속 광디스크 드라이브(ODD) 시스템에서 위치제어 성능을 향상시키기 위해서는 디스크의 면 진동과 수평 진동과 같은 외란에 의한 오차를 감소 시켜야만 한다. 따라서 하드디스크를 포함한 여러 분야에서 뛰어난 외란 제거 성능을 보이고 있는 외란 관측기는 좋은 대안이 될 수 있다. 그러나 ODD 같은 양산용 전자제품에 외란 관측기를 구현하기 위해서는 별도의 계산 장치가 필요하고, 출력신호를 직접 Feedback 신호로 활용해야 하는 경우가 발생한다. 본 논문에서는 ODD 시스템의 외란을 제거하기 위한 수정된 구조를 가지는 오차를 기초로 한 외란관측기(Error Based Modified Disturbance Observer, EM-DOB)를 제안한다. EM-ROB 시스템은 DOB 시스템에 비해 그 구조가 더욱 간편하고 쉽게 구현 할 수 있다는 장점을 가진다. 그리고 제안한 EM-DOB 시스템의 특성을 연구하고 실험을 통해서 EM-DOB의 효용성을 입증하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.112-122
• /
• 1999

In realistic control systems the nonlinear saturation attributes of the control actuator due to physical limitations should be taken into account This nonlinear saturation of actuators may cause not only deterioration of the control performance but also a large overshoot during start-up and shut-down. As the overshoot increases the system may become oscillatory unstable. in this paper the supervisor implementation which guarantees good performance for saturation operation and prevents reset wind up is presented, Moreover the sufficient conditions of the stability for saturated system using supervisory control with a dynamic controller are provided in the continuous-time and in the discrete-time domain Numerical example is illustrated to depict the efficiency of supervisory control for a typical satuaurated production-distribution system controlled by a discrete-time dynamic controller and to validate basic results by simulation.