• Journal of Life Science
• /
• v.29 no.6
• /
• pp.679-687
• /
• 2019

Litsea populifolia, a plant species of the Lauraceae family, is widely distributed in the tropical and subtropical areas of Asia. The phylogenetic relationships and botanical characteristics of L. populifolia have been reported; however, its anti-oxidative and anti-cancer activities remain unclear. In this study, we evaluated the anti-oxidative and anti-cancer effects of ethanol extracts of L. populifolia (EELP) together with the molecular mechanism of its anti-cancer activity in human lung adenocarcinoma A549 cells. EELP showed significant anti-oxidative effects with a 50% inhibitory concentration at $11.71{\mu}g/ml$, which was measured by the 2,2-diphenyl-1-picrylhydrazyl radical scavenging assay. EELP exhibited cytotoxic activity and induced cell cycle arrest at the G1 phase in A549 cells in a dose-dependent manner, whereas EELP did not have the cytotoxic effect on the normal human lung cell line IMR90. Treatment with EELP also resulted in a decreased expression of G1/S transition-related molecules-including cyclin-dependent kinase (CDK) 2, CDK6, cyclin D1, and cyclin E-both for the transcription and translation levels. EELP-induced G1 arrest was associated with the phosphorylation of checkpoint kinase 2 (CHK2), p53, cell division cycle 25 homolog A (CDC25A), and the reduction of CDC25A expression in A549 cells. Collectively, these results suggest that EELP may exert an anti-cancer effect by cell cycle arrest at the G1 phase through both p53-dependent and p53-independent (ATM/CHK2/CDC25A/CDK2) pathways in A549 cells.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.64-80
• /
• 2018

In Korea, citizens can only know general information about crime. Thus it is difficult to know how much they are exposed to crime. If the police can predict the crime risky area, it will be possible to cope with the crime efficiently even though insufficient police and enforcement resources. However, there is no prediction system in Korea and the related researches are very much poor. From these backgrounds, the final goal of this study is to develop an automated crime prediction system. However, for the first step, we build a big data set which consists of local real crime information and urban physical or non-physical data. Then, we developed a crime prediction model through machine learning method. Finally, we assumed several possible scenarios and calculated the probability of crime and visualized the results in a map so as to increase the people's understanding. Among the factors affecting the crime occurrence revealed in previous and case studies, data was processed in the form of a big data for machine learning: real crime information, weather information (temperature, rainfall, wind speed, humidity, sunshine, insolation, snowfall, cloud cover) and local information (average building coverage, average floor area ratio, average building height, number of buildings, average appraised land value, average area of residential building, average number of ground floor). Among the supervised machine learning algorithms, the decision tree model, the random forest model, and the SVM model, which are known to be powerful and accurate in various fields were utilized to construct crime prevention model. As a result, decision tree model with the lowest RMSE was selected as an optimal prediction model. Based on this model, several scenarios were set for theft and violence cases which are the most frequent in the case city J, and the probability of crime was estimated by $250{\times}250m$ grid. As a result, we could find that the high crime risky area is occurring in three patterns in case city J. The probability of crime was divided into three classes and visualized in map by $250{\times}250m$ grid. Finally, we could develop a crime prediction model using machine learning algorithm and visualized the crime risky areas in a map which can recalculate the model and visualize the result simultaneously as time and urban conditions change.

• Journal of Nutrition and Health
• /
• v.51 no.6
• /
• pp.507-514
• /
• 2018

Purpose: Sargassum horneri (S. horneri) is a species of brown macroalgae that is common along the coast of Japan and Korea. The present study investigated the immuno-modulatory effects of different types of S. horneri extracts in RAW264.7 macrophages. Methods: S. horneri was extracted by three different methods, hot water extraction, 50% ethanol extraction, and supercritical fluid extraction. Cell viability was then measured by MTT assay, while the production levels of tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$), interleukin-6 (IL-6), and nitric oxide (NO) were measured by enzyme-linked immunosorbent assay and Griess assay, respectively. The expression and activation levels of inducible NO synthase (iNOS), mitogen-activated protein kinase (MAPK) and nuclear factor ${\kappa}B$ ($NF-{\kappa}B$) were examined by western blot analysis. Results: The three different S. horneri extracts were nontoxic against RAW 264.7 cells up to $50{\mu}g/mL$, among which treatment with hot water extract (HWE) of S. horneri significantly enhanced the production of TNF-${\alpha}$, IL-6, and NO in a dose-dependent manner. Hot water extract of S. horneri also increased the expression level of iNOS, suggesting that up-regulation of iNOS expression by HWE of S. horneri was responsible for the induction of NO production. In addition, treatment of RAW 264.7 macrophages with HWE of S. horneri increased the phosphorylation levels of ERK, p38 and JNK. Furthermore, the activation and subsequent nuclear translocation of $NF-{\kappa}B$ was enhanced upon treatment with HWE of S. horneri, indicating that HWE of S. horneri activates macrophages to secrete TNF-${\alpha}$, IL-6 and NO and induces iNOS expression via activation of the $NF-{\kappa}B$ and MAPKs signaling pathways. Conclusion: Taken together, these findings suggest that HWE of S. horneri possesses potential as a functional food with immunomodulatory activity.

• Journal of Life Science
• /
• v.28 no.12
• /
• pp.1507-1515
• /
• 2018

Benign prostatic hyperplasia (BPH) is characterized by prostatic hypertrophy mainly in the elderly. Corni Fructus is reportedly effective in the prevention and treatment of various diseases, but its efficacy on BPH has not been previously studied. In the present study, we investigated whether or not a Corni Fructus water extract (CF) could prevent testosterone-induced prostatic hyperplasia in rats. To induce BPH, castrated rats were subcutaneously injected with testosterone propionate (TP). CF was administered daily by oral gavage, along with the TP injections, and finasteride, a selective inhibitor of $5{\alpha}$-reductase type 2, was used as a positive control. The results show that CF significantly reduces prostate weight and histopathologic changes while also decreasing levels of serum dihydrotestosterone, similar to the finasteride-treated group. CF also suppresses TP-induced $5{\alpha}$-reductase expression and concentration in prostate tissue and serum, respectively. Furthermore, CF markedly inhibited TP-induced expression of the androgen receptor (AR) and the steroid receptor coactivator 1, an AR coactivator, which was associated with a decrease in prostate-specific antigen levels in both serum and prostate tissue. In conclusion, the results of this study indicate that CF weakens BPH status by inactivation of $5{\alpha}$-reductase and AR.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.163-177
• /
• 2019

This study aims to review the relations between the dyeing conditions (i.e., dye concentration, addition amounts of salt and alkali, and dyeing temperature) and dyeing properties and color fastness to light for identifying the optimal dyeing conditions when dyed regenerated woody fibers were obtained through the defibration of waste medium density fiberboard (MDF) using reactive Red H-E3B (Bis-monochlorotriazine (MCT)/MCT type) and reactive Red RB133% (Bis-MCT/Vinyl sulphone type). The dyeing yield (K/S) obtained using two types of reactive dyes increased as the dye concentration increased by 1-10% (on the weight of fiber (OWF)). In addition, the K/S of H-E3B was higher than that of RB133% irrespective of the dye concentration. The color difference of H-E3B after ultraviolet (UV) radiation was lower than that of RB133%, denoting good resistance to discoloration by UV. As the amount of sodium sulfate increased, the color difference and K/S also increased, and the adequate salt content was determined to be 50-70 g/L. Further, the color difference and K/S significantly increased only the addition of 2 g/L of sodium carbonate; however, almost no difference was observed when more than 2 g/L of sodium carbonate was added. The addition amount of sodium carbonate was adequate 5-10 g/L to dyeing the fiber and the pH at this addition level was 10. The dyeing yield of H-E3B increased when the dyeing temperature increased; however, it subsequently decreased after the dyeing temperature became $80^{\circ}C$. The dyeing yield of RB133% was almost the same up to $60-70^{\circ}C$ but declined subsequently. Thus, the adequate temperatures were $80^{\circ}C$ and $60^{\circ}C$ for H-E3B and RB133%, respectively. If the waste MDF woody fiber was dyed under the aforementioned optimal conditions, dyed regenerated woody fiber can be obtained having the following colors: 1.5 to 2.0R with the H-E3B dye and 9.6 to 10.0 PR with RB133%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.3
• /
• pp.49-61
• /
• 2019

Swine manure has been recognized as a organic sources for composting and many research was conducted to efficiently utilize and treat. This study was to evaluate a feasibility for producing swine manure compost under various treatment with mixture of swine manure and saw dust. Treatments were designed as follows; non aerated composting pile(REF), aerated composting pile of $100L/m^3$(EXP1), and aerated composting pile of $150L/m^3$(EXP2). The total days of fermentation were 28 days and each samples were collected at every 7 days from starting of composting. Temperature sensors were installed under 30~40cm from the surface of composting pile. Inner temperature in composting piles of EXP1 and EXP2 was rapidly increased to $67{\sim}75^{\circ}C$ within 1~2 days. The elevated temperatures found during the thermophilic phase are essential for rapid degradation of organic materials. While swine manure composted, moisture content, total nitrogen, EC of EXP1, EXP2 in sample at 28 days were lower than those of REF. But, pH and organic matter of EXP1, EXP2 in sample at 28 days were higher than those of REF. After finishing fermentation experiment, maturity was evaluated with germination test. Calculated germination index(GI) at REF, EXP1 and EXP2 were 23.49, 68.50 and 51.81, respectively. The values of germination index were higher at EXP1 and EXP2 which is aerated composting piles than REF which is non aerated composting pile. According to the results, composting process by aerated static pile compost had significant effect on the reduction of required period for composting. Supplying adequate amount of air to compost swine manure will greatly reduce composting period.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.1
• /
• pp.37-47
• /
• 2019

Recently, due to the increase in skin diseases caused by particulate matter, endocrine disruptor and environmental changes, the trend of development of cosmetic materials has been shifting to the more safe and effective ingredients based on natural materials rather than existing synthetic compounds like steroids and antihistamines. This study aimed to develop a new natural cosmetic materials using oriental herbs such as Eucommiae cortex, Alpinia oxyphylla Miquel and Bombyx batryticatus. First, DPPH assay was performed to examine the antioxidative activity of the herbal extract (Mix) and 98.8% DPPH radical scavenging activity was confirmed at $400{\mu}g/mL$ concentration of it. In order to confirm the whitening efficacy of oriental herbal extracts(mix), the amount of melanin synthesized after stimulation of ${\alpha}-MSH$ with B16F10 cells was measured. Results showed that it was decreased to 27.1% comparing with the only ${\alpha}-MSH$ treated group, which confirmed the whitening efficacy. Also, both nitric oxide(NO) production and iNOS and COX-2 expression were significantly reduced in RAW264.7 macrophages activated by LPS in the presence of the extracts(Mix). The mRNA expression of the inflammatory cytokines such as $IL-1{\alpha}$, $IL-1{\beta}$, IL-6, and $TNF-{\alpha}$ was also analyzed to confirm the inhibition effect of the extracts on inflammation. Finally, to confirm the enhancement of skin barrier function, the expression of claudin 1 gene, a tight junction protein, was observed using human keratinocyte HaCaT cells and increased as concentration dependent manner. From these results, it is concluded that the oriental herbal extracts(Mix) containing Eucommiae cortex, Alpinia oxyphylla Miquel and Bombyx batryticatus is effective for antioxidant, anti-inflammation, skin whitening, and skin barrier and thus could be applied as a new natural cosmetic material.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.145-150
• /
• 2019

In this study, we used extracts obtained from five different solvents (water, ethanol, hexane, ethyl acetate, butanol) of Achyranthes japonica (AJ) and also AJ fermented with Lactobacillus plantarum (LP) to confirm effects on the anti-inflammatory activity in RAW264.7 cells. Experiments of measuring nitric oxide (NO) and cytokine production were performed in lipopolysaccharide (LPS)-induced RAW264.7 cells, and the expression of both cyclooxygenase-2 (COX-2) and inducible nitric oxide synthase (iNOS) was observed by a western blot method. The cytotoxicity of RAW264.7 was confirmed by the cell counting kit (CCK) assay at a concentration of $100{\mu}g/mL$, which has no toxicity. As a result of the inhibition of NO production, the inhibition rate of AJ-LP extracted with ethanol samples was about 74% higher than that of using the control group. Interleukin-6 (IL-6), tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$), and Interleukin-$1{\beta}$ (IL-$1{\beta}$), which are inflammatory cytokines, also showed an excellent efficacy with inhibition rates of about 57, 70, and 74%, respectively. Comparing to the results of COX-2 and iNOS expression in the AJ group, the inhibition rate of 20-hydroxyecdysone was the highest than others. On the other hand, the COX-2 expression level of AJ-LP group decreased about 16% compared to that of the control group, and the iNOS expression level was also decreased about 7%. These results suggest that the extract of AJ fermented from L. plantarum can be used as an anti-inflammatory natural material.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.110-117
• /
• 2019

Purpose: This study was to evaluate the wear resistance of 3D printed, milled, and conventionally cured provisional resin materials. Materials and methods: Four types of resin materials made with different methods were examined: Stereolithography apparatus (SLA) 3D printed resin (S3P), digital light processing (DLP) 3D printed resin (D3P), milled resin (MIL), conventionally self-cured resin (CON). In the 3D printed resin specimens, the build orientation and layer thickness were set to $0^{\circ}$ and $100{\mu}m$, respectively. The specimens were tested in a 2-axis chewing simulator with the steatite as the antagonist under thermocycling condition (5 kg, 30,000 cycles, 0.8 Hz, $5^{\circ}C/55^{\circ}C$). Wear losses of the specimens were calculated using CAD software and scanning electron microscope (SEM) was used to investigate wear surface of the specimens. Statistical significance was determined using One-way ANOVA and Dunnett T3 analysis (${\alpha}=.05$). Results: Wear losses of the S3P, D3P, and MIL groups significantly smaller than those of the CON group (P < .05). There was no significant difference among S3P, D3P, and MIL group (P > .05). In the SEM observations, in the S3P and D3P groups, vertical cracks were observed in the sliding direction of the antagonist. In the MIL group, there was an overall uniform wear surface, whereas in the CON group, a distinct wear track and numerous bubbles were observed. Conclusion: Within the limits of this study, provisional resin materials made with 3D printing show adequate wear resistance for applications in dentistry.

• Korean Journal of Food Science and Technology
• /
• v.51 no.2
• /
• pp.160-168
• /
• 2019

This study aimed to determine whether double-processed ginseng berry extract (PGBC) could improve learning and memory in an $A\hat{a}42$-induced Alzheimer's mouse model. Passive avoidance test (PAT) and Morris water-maze test (MWMT) were performed after mice were treated with PGBC, followed by acetylcholine (ACh) measurement and glial fibrillary acidic protein (GFAP) detection for brain damage. Furthermore, acetylcholinesterase (AChE) activity and choline acetyltransferase (ChAT) expression were analyzed using Ellman's and qPCR assays, respectively. Results demonstrated that PGBC contained a high amount of ginsenosides (Re, Rd, and Rg3), which are responsible for the clearance of $A{\hat{a}} 42$. They also helped to significantly improve PAT and MWMT performance in the $A{\hat{a}} 42-induced$ Alzheimer's mouse model when compared to the normal group. Interestingly, ACh and ChAT were remarkably upregulated and AChE activities were significantly inhibited, suggesting PGBC to be a palliative adjuvant for treating Alzheimer's disease. Altogether, PGBC was found to play a positive role in improving cognitive abilities. Thus, it could be a new alternative solution for alleviating Alzheimer's disease symptoms.