• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.273-279
• /
• 2007

Probabilistic Risk Assessment considering statistically random variables is performed for the preliminary design of an Arch Bridge. Component reliabilities of girders have been evaluated using the response surfaces of the design variables at the selected critical sections based on the maximum shear and negative moment locations. Response Surface Method (RSM) is successfully applied for reliability analyses lot this relatively small probability of failure of the complex structure, which is hard to be calculated by Monte-Carlo Simulations or by First Order Second Moment method that can not easily calculate the derivative terms in implicit limit state functions. For the analysis of system reliability, parallel resistance system composed of girders is modeled as a parallel series connection system. The upper and lower probabilities of failure for the structural system have been evaluated and compared with the suggested prediction method for the combination of failure modes. The suggested prediction method for the combination of failure modes reveals the unexpected combinations of element failures in significantly reduced time and efforts, compared with the previous permutation method or conventional system reliability analysis method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3C
• /
• pp.398-407
• /
• 2004

In this paper, a blind watermarking method which is suitable to the video compression using 2-D discrete wavelet transform was proposed and implemented into the hardware using VHDL(VHSIC Hardware Description Language). The goal of the proposed watermarking algorithm is the authentication about the manipulation of the watermark embedded image and the detection of the error positions. Considering the compressed video image, the proposed watermarking scheme is unrelated to the quantization and is able to concurrently embed or extract the watermark. We experimentally verified that the lowest frequency subband(LL4) is not sensitive to the change in the spatial domain, so LL4 subband was selected for the mark space. And the combination of the bitplanes which has the properties of both the minimum degradation of the image and the robustness was chosen as the embedded Point in the mark space in LL4 subband. Since we know the watermark embedded positions and the watermark is embedded by not varying the value but changing the value, the watermark can be extracted without the original image. Also, for the security when exposing the watermark embedded position, we embed the encrypted watermark by the block cipher. The proposed watermark algorithm shows the robustness against the general image manipulation and is easily transplanted into the image or video compressor with the minimal changing in the structure. The designed hardware has 4037 LABs(24％) and 85 ESBs(3％) in APEX20KC EP20K400CF672C7 FPGA of Altera and stably operates in 82MHz clock frequency.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.111-120
• /
• 2016

This is an experimental study to analyze the explosion and fire hazards of mobile phone batteries. Using the lithium-ion batteries currently used on smart phone as the experiment samples, the experiments were conducted by overcharging, internal and external short circuit, and thermal shock with the potential of explosion and fire caused by careless use or abnormal conditions. The experiment results showed that, in the case of overcharging and external short circuit, there was no explosion and fire hazard in the normal operation of the protection circuit module (PCM), but there were big risks when the PCM faulted conditions were assumed. In the case of the experiments by internal short circuit and thermal shock, such risks varied depending on a battery charge state. In other words, it could be verified that there were low risks of explosion and fire in a full discharge state, but there were high risks in a full charge state. These experiment results suggest that to minimize the explosion and fire hazards of mobile phone batteries, an alarm device is necessary when the PCM fault occurs. In addition, a solid battery case should be made and safety equipment, such as a cooling device to avoid high temperature, is needed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.532-536
• /
• 2007

급속한 도시화 및 지구온난화로 인한 집중호우로 홍수피해가 해마다 증가하고 있다. 홍수피해를 최소화하기 위하여 4대강 중심의 홍수예경보시스템이 구축되는 등 다양한 제도적 장치가 마련되고 있으나 중소하천이 분포되어 있는 도시유역에서의 홍수예측기능은 부족한 실정이다. 본 연구에서는 중소 도시하천에 적용 가능한 실시간 도시홍수예측서비스 시스템(Realtime Urban Flood Forecasting Service, U-FFS)을 개발하였다. 경기도 성남에 위치한 탄천을 대상유역으로 선정하고 실시간 강우 및 수위관측소를 설치하여 수문데이타를 수집하였으며 이를 바탕으로 수위예측모형을 구축하였다. 모형구축에는 이미 국내외 학계에서 그 정확도가 입증된 바 있는 Data-driven 모델의 일종인 ANFIS(Adaptive Neuro-Fuzzy Inference System)를 이용하였다. 개발된 수위예측모형은 지정된 시간에 자동으로 작동 가능한 실행파일로 프로그래밍되어 최종적으로 홍수예측 웹서비스와 연동된다. U-FFS는 집중호우 발생 시 최종 유출구의 30분, 1시간, 2시간 후의 수위 예측값을 웹 상을 통해 제공함으로써 언제 어디서나 홍수예측 정보를 누구나 손쉽게 획득할 수 있는 장점이 있다. 시범운영 결과, 30분 및 1시간 후의 수위 예측은 정확도가 매우 뛰어났으며 2시간 후의 수위 예측의 정확성은 다소 떨어지는 것으로 확인되었으나 전반적인 홍수예측 판단에는 무리가 없을 것으로 예상된다. 본 시스템의 홍수예측모형은 생성 및 수정이 간편하여 그 활용성이 매우 높을 것으로 기대된다. 특히 안전함을 지향하는 각종 U-City나 홍수피해가 빈번한 도시유역에 적용하면 기존 시스템과 차별화된 실시간 홍수예측 서비스가 가능해져 홍수피해를 최소화할 수 있을 것이다. 취수구 직경 D의 3.3배를 벗어나지 않는다는 결과를 도출할 수 있었다.링 목적으로 사용될 수 있다. 본 연구에서 개발한 영상수위계는 한강홍수통제소 관할의 전류, 청담대교 등 4개소 낙동강 홍수통제소 2개소, 지자체 등에 적용되었으며, 적용 결과 비교적 안정적이면서 정확하게 수위를 측정하는 것으로 나타났다. 한편 기존 CCD 카메라 이외에 CCTV를 이용한 영상수위계를 개발하여 영상의 화질 개선뿐 아니라 하천화상 감시 기능을 강화하였다.소류의 섭취율은 높았다. 집단간의 상관도를 보면 교육별로 김치, 장아찌, 콩이 각각 p>0.5 수준에서 유의한 차가 없었고, 나머지는 유의한 차가 있었다. 연령별로는 멸치가 유의한 차가 없었고(p>0.5), 수입별로는 콩이 유의한 차가 없었다(p>0.5). 4. 영양지식(營養知識) 검토 가정생활(家庭生活)에 필요(必要)한 일반적(一般的)인 영양지식(營養知識)은 대체적으로 낮은 편이었다. 어린이 영양, 편식의 해로움, 비만증의 해로움, 임신부 그리고 수유부 영양에 대하여는 일반적으로 알고 있다고 하였으며, 그다음으로 이유기 영양, 어린이 발육에 필요한 식품, 식품과 영양소와의 관계, 우유의 성분, 노인영양에 대하여 잘 알고 있는 비율이 낮았으며, 인체의 영양소, 식단작성여부, 간식의 이론, 식품감별법에 대하여는 가장 낮은 비율을 나타냈다. 각 영양지식은 교육정도가 높을수록 영양지식이 높았고, 교육별 집단간의 유의한 차가 나타났다. (0.001

• Journal of the Korean Geotechnical Society
• /
• v.34 no.11
• /
• pp.5-19
• /
• 2018

The characteristics of the skin shear stress distribution for the fixed length of the ground anchor are extremely nonlinear and the engineering mechanisms are complex relatively. So it is difficult to design the anchors simulating the actual behavior by considering various soil conditions and nonlinear behavior. Due to these limits, constant skin shear stress distributions for the whole fixed length of the ground anchor are usually assumed in the design for the sake of convenience. In this study, to assess the pull-out behavior of the tension-type ground anchors, the in-situ pull-out tests in weathered-soil conditions were carried out. Based on the test results, the skin shear behaviors for the fixed length of tension-type ground anchors were established and the multi-linear slip shear model predicting this behavior and an analytical technique applying this model were proposed. From the similarity between the results of the in-situ pull-out tests and those of the analytical technique, the applicability and availability of the multi-linear slip shear model and the proposed analytical technique were verified. The maximum shear stress was developed at the start point of the fixed length acting with the smaller load than the maximum pull-out load but the minimum shear stress was developed at the start point of the fixed length and the maximum shear stress was developed at the point apart from the start point of the fixed length after the maximum pull-out load.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.143-150
• /
• 2021

To develop the technique for predicting the horizontal displacement of a retaining wall induced by an earthquake, an equation of motion that depicts the retaining wall-soil vibrating system was derived. The resulting differential equation was solved using the Runge-Kutta-Nystr?m method. Considering the pre-mentioned derivation process, the analysis procedures for obtaining horizontal displacement induced by an earthquake were programmed. The core algorithm of the displacement-force relationship, which is the main engine of the developed program, was suggested. Considering the results obtained by adopting the developed program to the assumed retaining wall under an earthquake, the relationships between the time-displacement, time-force, and displacement-force were reasonable. According to the results computed by the program, the displacements to the front direction of the wall occurred, and the displacement per cycle converged after some cycles elapsed. Displacements with a natural period were calculated, which showed that the maximum displacement was observed when the natural frequency was slightly different from the excitation frequency rather than the same values of the two frequencies. This happens because the vibrating system was modeled by two springs with different stiffness.

• Journal of Food Hygiene and Safety
• /
• v.38 no.4
• /
• pp.217-227
• /
• 2023

The consumption of ready-to-eat side dishes is rapidly growing in South Korea. These foods are particularly vulnerable to microbiological contamination as they are often cooked without any treatment, such as heating or stored at room temperature after cooking. Hence, in 2022, we analyzed the ready-to-eat side dishes sold in Gyeongsangnam-do, South Korea for microbiological contamination. We collected 100 samples from supermarkets in 7 cities, and then examined them for presence of food-borne pathogens and sanitary indicator bacteria. In the analysis of the food-borne pathogens, Bacillus cereus and Clostridium perfringens were isolated from 51 samples (51.0%) and 3 samples (3.0%), respectively. However, both quantitatively met the Korean Food Standards Codex. Genes of five different enterotoxins and one emetic toxin were analyzed from the 51 isolated B. cereus strains. We detected enterotoxin entFM (100.0%), nheA (94.1%), hblC (58.8%), cytK (56.9%), and bceT (41.2%) in 51 isolates, and emetic toxin gene, CER, in only one (2.0%) isolate. We did not detect C. perfringens toxin gene (cpe) that causes food poisoning in any one of the three C. perfringens isolates. In the case of sanitary indicator bacteria, Kimchi had the highest levels of total aerobic bacteria and coliforms, followed by Saengchae, Jeotgal, Jeolim, Namul, and Jorim, respectively. We counted total aerobic bacteria at two different storage temperatures (4℃ and 20℃) to determine the effect of storage temperature. When stored at 20℃, total aerobic bacteria count increased in most of the ready-to-eat side dishes, except for Jeotgal. This result conclusively shows the need for refrigerating the ready-to-eat side dishes after purchase. Further research is needed to assess the risk and safety of the ready-to-eat side dishes available in the market and determine appropriate safety management practices.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.1
• /
• pp.102-113
• /
• 2013

The purpose of this study was to examine parental perceptions on the importance, performance level, and satisfaction with foodservice quality at daycare centers in the Compensation and Welfare Service institute. The questionnaire was developed to measure thirty-two attributes of foodservice operations are administered to 598 parents and 23 foodservice supervisors from June 22, 2009 to July 10, 2009. The parents placed a high importance on the need for foodservices, earning 4.70 points out of 5 points. Their perceptions of foodservice quality menu, foodservice ingredients and effects, facilities, sanitation, and service scored even higher than performance. The overall satisfaction level for foodservice compared to performance was 4.33 and 4.03 points out of 5 points, respectively. Multiple regression analysis indicated that 98.6% of the variance in parents' overall satisfaction scores was explained by six dimensions.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Journal of Korea Water Resources Association
• /
• v.56 no.12
• /
• pp.993-1003
• /
• 2023

Due to the increasing greenhouse gas emissions, the global mean temperature has risen by 1.1℃ compared to pre-industrial levels, and significant changes are expected in functioning of water supply systems. In this study, we assessed impacts of climate change and instreamflow management on water supply reliability in the Geum River basin, Korea. We proposed univariate climate response functions, where mean precipitation and potential evaporation were coupled as an explanatory variable, to assess impacts of climate stress on multiple water supply reliabilities. To this end, natural streamflows were generated in the 19 sub-basins with the conceptual GR6J model. Then, the simulated streamflows were input into the Water Evaluation And Planning (WEAP) model. The dynamic optimization by WEAP allowed us to assess water supply reliability against the 2020 water demand projections. Results showed that when minimizing the water shortage of the entire river basin under the 1991-2020 climate, water supply reliability was lowest in the Bocheongcheon among the sub-basins. In a scenario where the priority of instreamflow maintenance is adjusted to be the same as municipal and industrial water use, water supply reliability in the Bocheongcheon, Chogang, and Nonsancheon sub-basins significantly decreased. The stress tests with 325 sets of climate perturbations showed that water supply reliability in the three sub-basins considerably decreased under all the climate stresses, while the sub-basins connected to large infrastructures did not change significantly. When using the 2021-2050 climate projections with the stress test results, water supply reliability in the Geum River basin was expected to generally improve, but if the priority of instreamflow maintenance is increased, water shortage is expected to worsen in geographically isolated sub-basins. Here, we suggest that the climate response function can be established by a single explanatory variable to assess climate change impacts of many sub-basin's performance simultaneously.