• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.256-257
• /
• 2006

대규모 전력산업의 지속적인 성장을 위해서는 전력계통 시스템의 고신뢰도를 필수적으로 요구하며 따라서 계통운영 전반에 디지털과 자동화 기술 기반의 고도의 기술 필요성이 날로 증대되고 있다. 그 결과 변전소 자동화 구축을 위한 세계 표준 규격인 IEC 61850이 제정되었으며 2005년 전체적인 세부 사항이 확립되어 발표되었다. 이러한 세계적인 추세에 발맞추어 한국전력공사는 변전소 내에 설치되는 상위 장치인 변전소 운전용 컴퓨터, 하위 장치인 센서들(변류기, 변성기 등)과 제어기(차단기 등), 그리고 상위 장치와 하위 장치 사이에서 감시, 진단, 보호, 제어, 계측, 보안 방재 등을 담당하는 장치(IED Intelligent Electronic Device)들을 기존의 다심 구리 케이블 대신 고속 LAN 케이블로 연결하여 데이터 전송 및 제어명령 전송에 사용하는 통신에 IEC 61850 단일 프로토콜을 사용함으로서 변전소 건설과 운전, 유지보수의 효율성과 신뢰성을 향상시킴과 동시에 변전소 운영에 필요한 정보의 가용성을 극대화시킬 수 있는 기반을 구축하기 위한 기술을 개발 중에 있다.

• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.51-56
• /
• 2008

A combination of VPNs and dial-up access, such as DSL and Cable, usually provides the cost-effective solution as the substitution of private networks on high-cost leased line. The business demand for high availability has increased with VPN spreading. This paper presents the schemes for a high availability of network access and a load balancing of network traffic in VPN gateways by using multiple links or multihoming capability based on active-active approach. The high availability and load balancing of network links can be achieved by duplicating external network access into multiple independent links. This can provide a continuous network connection to internal users even if one of the links is failed. Moreover, it can provide twice network bandwidth by distributing the traffic into the links. Static and dynamic algorithms are proposed as the load balancing algorithms.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.155-163
• /
• 2005

Pressure heating rollers with temperature control were mounted to a flat cable laminating machine (FCLM). Pressure heating rollers should be heated up to the setting temperature $(175^{\circ}C)$ and kept on to producing good quality flexible flat cables (FFC). Existing Pressure heating rollers took more than 70minutes to the setting temperature and did not keep on the setting temperature in production. Temperature controller, electric power controller, material and diameter of rollers and heat capacities were changed to improve the temperature control of the pressure heat rollers for better production of the FFC. Thus, the reaching time to the setting temperature (RT), temperature stability time (TST) and temperature hunting (TH) were measured and compared with the existing pressure rollers case. The RT of A roller was shortened by 50minutes, and B roller was shortened by 15minutes. The TST of A roller was shortened by 13minutes, and B roller was shortened by 15minutes. The THs of both A and B rollers were settled up to ${\pm}5^{\circ}C$. Finally, the productivity of the FCLM and the quality of the FFC were increased.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.74-79
• /
• 2020

Safety inspection of cable-supported bridge has increasingly attention as many cable-supported bridges are currently constructed/operated. Whilst cables as a main component in cable-supported bridge should be inspected regularly, traditional method (visual inspection) has limitation to check the condition of cables properly due to restricted factors. It is evidently necessary to develop cable-inspection robot to overcome this concern. In this respect, the main aim in this study is to manufacture the improved robot compared with the existing robot. The improved functions of the robot in this study were that the robot can be operated in large cable diameter (greater than 200 mm) and climbing ability of the robot increases. In addition, electro-magnetic sensor as a non-destructive method in the robot was added to detect damaged cables and performance of the sensor was evaluated in indoor and field experiments. Consequently, the robot was able to move on the cable with ~0.2m/s and to detect damaged cables using the sensor. It was also confirmed that performance of the robot in field test is similar to that in indoor test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.246-252
• /
• 2020

Safety accidents have been reported due to falling accumulated snow from cables of cable-supported bridges. In addition to the direct damage caused by falling snow, secondary damage, such as traffic accidents, can occur. Various methods have been proposed to prevent these accidents, but there are still problems in safety and practicality. In this study, a cable robot type was selected as one of the active methods for removing accumulated snow on cables. An attempt was made to increase the climbing ability of the robot to improve the efficiency of snow removal. In addition, the available range of cable diameter for the robot can be adjusted flexibly to be applied to cables used in the field. A high-resolution camera was also installed to check the surface condition of the cable in real time to increase the utility, and be used as a cable inspection robot. A three-axis accelerometer and a tension conversion algorithm were added to measure the tension force of cables. To verify the performance, indoor and field experiments were conducted, and future improvements for the inspection robot were proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.3
• /
• pp.359-364
• /
• 2016

As cable TV networks have a media feature that is a broadband wire network, they can provide not only TV broadcasting services but also communication services. Accordingly, the cable TV network is mentioned as the optimal network for convergence of broadcasting and communication services. Recently, Available frequencies of the cable TV network have become insufficient as enhancement of video quality, increment of VoD service, and growth of high-speed internet service. This paper presents a new implementation method of switched digital video (SDV) technology that is introduced for obtaining additional frequency band. In the SDV system, only TV channels requested from viewer are sent and non-requested channels are dropped. The presented SDV uses a sharing method of TV broadcasting and communication service in a same frequency band. This method shows increase of spectrum efficient from switching of TV service channels without building a complex system.