• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.444-448
• /
• 1998

사람이 손끝으로 직물을 누르며 문지를 때 느끼는 감정을 객관적으로 표현하는 연구의 필요성은 계속 증대되고 있다. 일본의 가와바타 교수는 직물의 역학적/물리적 특성을 측정하여 Hand value로서 객관화 시켰다. 가와바타 시스템에서는 직물을 손으로 누를 때의 탄력성, 따뜻한 느낌이 동반된 두꺼움(Fullness It softness)을 'FUKURAMI'라는 감각표현용어를 사용하여 이 주관적인 느낌을 객관화 시켰다. (중략)

• Science of Emotion and Sensibility
• /
• v.2 no.1
• /
• pp.105-111
• /
• 1999

In order to introduce the touch to engineering and industries, it must be preceded to dstablish a quantitative barometer of the feeling. for this purpose, we developed a tactile measuring system to measure physical properties of texture, such as surface roughness, friction coefficient and compliance. The tactile measuring system uses a LASER type displacement sensor, which is a non-contacting system, in measuring the surface roughness. By considering that human tactile system is a contacting mechanism, this non-contacting method needs to be modified. As a precedent research of that, we compared the contacting and non-contacting method in this paper. Surface roughness of ten cloths were measured by using the measuring system, then compared to the test results using the Kawabata evaluation system(KES), which uses a contacting method in measuring the surface roughness.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.626-634
• /
• 2017

This study investigated garment formability of the 73 breathable fabrics for sports-wear garment and their fabric mechanical properties were measured using KES-FB and FAST systems. Predicted garment formability from the mechanical properties measured using KES-FB and FAST systems was compared and discussed with fabric structural parameters. In addition, virtual 3D simulation silhouette by I-designer CAD system wear appearance by simulation using 3D CAD system. And compared with FAST finger chart by mechanical properties of FAST system. The correlation coefficients of extensibility and shear modulus between KES-FB and FAST systems were high, however, bending rigidity and compressibility showed relatively low correlation coefficients. The correlation coefficient of garment formability of breathable fabrics between KES-FB and FAST systems was 0.82. It revealed that garment formability can be predicted from fabric mechanical properties by KES-FB and FAST systems. The garment formability of nylon breathable fabric was higher than that of PET one, and the garment formability of laminated breathable fabric showed the highest value compared to coated, dot and hot melt laminated breathable fabrics. It revealed that garment formability of breathable fabrics for sports-wear can be predicted from fabric mechanical properties and garment formability was dependent on the materials, finishing method and fabric structural parameters.

• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.613-625
• /
• 2015

This research was conducted to provide basic data to improve expressivity required for virtual clothing to replace actual clothing. For the experiment, 6 materials were selected and 12(2 kinds of length) actual flared skirts were made. At the same time, simulations were carried out on OptiTex Runway 12.0 for 36(12 kinds of skirts $\times$ KES, FTU, KES weight/10) kinds of virtual flared skirts, which were applied with the measured property values (thickness, weight, bending, shear, friction, and stretch). Also, the study compared and analyzed the wearing images, silhouette overlapping images, and skirt length measurements of the actual and virtual skirts put on a dummy. As a result, the actual skirts showed clear distinction for each material. In contrast, virtual 1 and 2 expressed fabric 3 in the most similar way, but could not recreate the uniform, soft, and natural flare shape of the actual skirts in general. Virtual 3 formed natural flares as those of the actual skirts, and expressed fabric 1, 5, and 6 in a similar way. However, virtual 3 had too much volume and barely showed any distinction for each material. All of virtual 1, 2, and 3 expressed different flare shapes on the front and back sides of the skirt similarly to the actual skirts, and had a good visual expression for the color and texture of the materials. However, they could not effectively express the elasticity and fabric sagging in the bias direction.

• Fashion & Textile Research Journal
• /
• v.19 no.3
• /
• pp.344-352
• /
• 2017

This study investigated the formability and appearance performance of 20 women's worsted fabrics. For this purpose, 10 foreign fabrics (9 Italian + 1 Japan fabrics) were prepared and 10 domestic worsted fabrics for women were made in Cheil woolen textile company for comparing with foreign fabrics. The mechanical properties of the 20 fabrics were measured using KES-FB and FAST systems; subsequently, fabric formability (F) and total appearance value (TAV) were calculated and compared with a virtual 3-D simulation silhouette by i-designer CAD system. The fabric formability of the domestic fabrics, calculated by KES-FB system, was lower than foreign fabrics, which was assumed to be caused by the stiff tactile property. The result was similar to that of the FAST system. Good wearing performance of the foreign worsted fabric was assumed to be caused by high extensibility and the compressibility of the fabrics. The TAV's of the domestic fabrics were also lower than foreign fabrics. Both the correlation between TAV and formability by the KESFB system and the correlation between TAV and formability by FAST system showed a good correlation coefficient. Fabric formability between KES-FB and FAST systems also showed a good correlation. The 3-D simulation silhouette of the foreign fabric by i-designer CAD system appeared superior to the domestic one, and assumed to be attributed to the low extensibility of the weft direction, stiff bending and high shear properties of the fabric.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.1020-1029
• /
• 2015

This paper investigated the wearing performance of knitted fabrics made of air vortex yarns using PTT/tencel/cotton fibres in comparison with ring and compact yarns for emotional garment. Wicking property of knitted fabric made of MVS yarns was worse than those by ring and compact yarns, however, drying property of knitted fabric made of MVS yarns was better than those by ring and compact yarns, which was explained as more water vapor transport due to larger openness between fibres in the MVS yarns than those in the ring and compact yarns. Thermal conductivity of knitted fabric made of MVS was lower than those of ring and compact yarns and maximum heat flow(Q_max) at the transient state of MVS knitted fabric was lower than those of ring and compact yarns, which may be attributed to MVS yarn structure that has parallel fibres in the core part of the yarn and fasciated fibre bundles on the sheath part with roughness on the yarn surface. However, pilling of MVS knitted fabric was better than those by ring and compact yarns, which was caused by less and shorter hairy fibres protruded from MVS yarn surface than those of ring and compact yarns. It was observed that tactile hand of MVS yarn knitted fabrics was stiffer than those of ring and compact yarns knitted fabrics. It was explained by low extensibility and compressibility and high bending and shear rigidities of the MVS yarn knitted fabrics, which resulted in bad wearing performance of MVS knitted fabric.

• Fashion & Textile Research Journal
• /
• v.23 no.5
• /
• pp.667-673
• /
• 2021

The purpose of this study was to obtain drape information and objective texture of fabrics easily and quickly by using a constructed fabric database. For the construction of the fabric database, 287 woven fabrics were examined by using the CLO fabric kit, KES-FB system, and drape test system. The k-means cluster analysis method was used to classify the fabrics into 7 grades. After correlation analysis of the fabric properties for each experiment, similar properties of the CLO fabric kit and KES-FB system were chosen, which were then designed to extract similar fabrics from the database. It was confirmed that inferring the drape information and objective hand feeling of fabrics was to some extent possible by extracting similar fabrics from the database. In this study, the primary hand and total hand value(THV) of KES-FB system, which was constructed by Kawabata and other experiments, were used to quantify the objective hand feeling, because they are the most widely used. However, these standards can be changed over time; in order to be applied within the clothing industry, these standards may have to be changed to some extent. Moreover, it is notable that although objective hand feeling cannot be expressed in the 3D virtual costume program, it can be easily derived from the constructed database. Additionally, it is expected that the existing 3D virtual costume program will express the costumes more realistically by improving these results.