• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.47-52
• /
• 2003

The metallurgical and mechanical experiments of Titanium frame were conducted to investigate the optimum brazing and the improved brazed joints by filler metals has been developed by using other filler metals at brazing process. The filler metal is used in form of a metallic glass. The optimum brazing conditions were obtained from microstructural observation of brazed joints chemical analysis by means of X-ray micro-analysis and heating method.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.393-396
• /
• 2011

본 연구는 유리내화실험을 실시하고 일본 동경이과대학에서 실시된 유리내화실험과 비교 분석하였으며, 분석결과, 실험에서 유리내화성능은 접합유리, 강화유리, 복층유리, 일반유리 순으로 나타났으며, 유리의 균열이 발생 후 일반유리는 $62^{\circ}C$, 접합유리는 $48^{\circ}C$, 복층유리는 $27^{\circ}C$가 상승한 후 파괴되었다. 일본의 실험에서는 일반유리의 경우 본 실험과 비교 시 비교적 낮은 온도로 측정되었으나 이는 가열조건에 차이에 따른 것으로 판단된다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.2
• /
• pp.175-183
• /
• 2004

Performance of the water/air direct contact air conditioning system, in which heat and mass are directly transferred between air and water droplet, is simulated using semi-empirical method. Direct contact system improves transport efficiency compared to conventional indirect contact system. In this study, correlations for h$_{c}$A / c$_{pm}$ which represent the capacity of direct contact system are derived as a function of air and water flowrate from the experimental data. Cooling and heating performance of the water/air direct contact air conditioning system are evaluated using these correlations.ons.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.50.3-50.3
• /
• 2009

지구관측용 광학탑재체를 탑재한 저궤도위성은 내부부품보호를 위해 표면처리와 같은 수동적 기법과 히터동작과 같은 능동적 기법을 함께 사용을 한다. 내부열손실을 막기 위해 위성외부의 거의 모든 부분을 단열재(MLI)로 감싸게 되며, 각 단열재는 견고하게 고정이 된다. 광학탑재체는 구성품의 보호와 최적성능의 영상획득을 위해 다수의 히터가 장착되는데, 각 히터는 가열대상물의 온도를 실시간으로 측정하여 미리 설정된 On/Off 온도를 기준으로 제어가 된다. 궤도상에서 탑재체가 겪게 되는 다양한 궤도열환경 시나리오에 대한 열해석결과를 이용하여 히터의 위치, 용량 및 제어온도가 결정된다. 궤도상 운용 중, 위성을 보호하는 단열재 사이에 미세한 틈이 발생한 가상적인 상황을 가정하여, 탑재체 히터의 임무주기변화와 탑재체 운용에의 영향을 분석한다.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2174-2176
• /
• 2000

FDTD(Finite Difference Time Domain) 방법을 적용하여 마이크로웨이브 오븐 내부의 전자기장을 해석하였고, 적외선사진을 통하여 실험과 비교 검증하였다. 부하의 종류와 형태에 따른 전자기장의 패턴 변화를 고찰하였고, 여러 가지 포밍형태와 오프닝 형태에 따른 전자기장의 패턴을 적외선 사진과 비교하였다. 표면 보정 기법을 적용하여 부하표면에서의 전자파 패턴을 보다 정확히 예측할 수 있었으며, 또한 마그네트론의 공진 주파수에 따른 전자파 파워 패턴의 변화를 살펴 보았다. 이와 같이 개발된 마이크로 웨이브 오븐 내부의 전자파 해석 프로그램을 이용하면, 균일 가열 성능 향상을 위한 마이크로웨이브 오븐의 캐비티 설계 기간을 크게 단축할 수 있을 것으로 생각된다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.4
• /
• pp.276-285
• /
• 1991

The transient heat transfer characteristics in the radiant heating panel were predicted by numerical analysis. Thermal behaviors of panel, such as temperature distributions in panel and convective and radiative heat fluxes in panel surface with respect to time were obtained. Heating hours per day, rate of energy supplied and maximum temperature differences at panel surface were also compared for several important parameters. The performance and thermal comfort of heating panel were studied and compared for various operating and design conditions such as pipe pitch, pipe location, pipe diameter and flow rate of hot water for the purpose of producing useful data, which can be used for the test and decision of efficient operating condition of the conventional heating systems or the optimal design of the new panel heating systems.

• Solar Energy
• /
• v.11 no.3
• /
• pp.9-20
• /
• 1991

Experiments for drying radish were carried out to analyze the drying characteristics and quality evaluation between solar heated-air drying and natural air drying system. Solar heated-air drying system consists of a small fan, a solar air heater and a tunnel dryer. Simulation model for thermal environments of solar collector was developed to investigate the effect of solar radiation and airflow rate on thermal performance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.461-464
• /
• 2006

Recently, as structures become bigger and higher, it is needed that high strength, high flow and high durability concrete. Demanding of High performance concrete that equality is maintained without material separation while flow, strength is increased by using low W/C rate and admixture, carbonation does not occur because of dense filling and has high durability is increasing rapidly. Because this high performance concrete is superior to general concrete in workability and durability, it is widely used in many construction and engineering works fields. However, it is reported that when it was exposed in fire, violent explosive spalling would be happened. Therefore, the purpose of this study evaluates explosive spalling properties of fire damaged high performance concrete according to the heating time.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.477-480
• /
• 2006

In this study, evaluation of fire-resistant performance for polypropylene fiber-mixed mortar was performed to establish specification for stability of tunnel structure against fire afterward. In the fire-resistant performance test with mix proportion of polypropylene fiber, cracks were observed for mortar under 0.15% of fiber content, but micro-cracks were remarkably reduced for mortar more than 0.2% of fiber content. From the results, we are concluded that optimal mix proportion of polypropylene fiber is $0.20{\sim}0.25%$.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.8
• /
• pp.417-425
• /
• 1999

This paper presents an effective control scheme with the voltage-fed half-bridge series resonant inverter for induction heating system, which is based upon a load-adaptive tuned frequency tracking control strategy using PLL(Phase Locked Loop) and its peripheral control circuits. The proposed control strategy ensures a stable operation characteristics of overall inverter system and ZVS(Zero Voltage Switching) irrespective of sensitive load parameter variations, specially in the non-magnetic materials as well as power regulation. The detail operation principle and the characteristics of inverter system with the proposed control scheme are described and its validity is verified by the simulation and the experimental results for a prototype induction cooking system rated at 1.2kW.