• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.222.2-223
• /
• 2003

추청벼와 삼강벼를 원료로 하여 전분을 제조하고 그 전분을 이용하여 초산 쌀 전분을 제조하여 얻어진 초산쌀 전분의 이화학적 성질을 검토하여 다음과 같은 결과를 얻었다. 초산 쌀 전분의 용해도와 팽윤력은 원료 전분에 비하여 높았으며 품종간에 약간의 차이를 나타내었다 광투과도는 원료 전분에 비하여 높았으며 원료 전력은 6$0^{\circ}C$, 초산 쌀 전분은 5$0^{\circ}C$부터 증가하기 시작하였으며, blue value는 원료 전분보다 낮게 나타났다. alkali number는 원료 전분보다 약7배 높았으며, 초산 쌀 전분 겔의경도, 응집성, 접착성, 점착성 및 저장성은 원료 전분 겔보다 높았으며 품종간에 약간의 차이를 나타내었다. Amylograph에 의한 초산 추정 및 삼강벼 전분의 호화개시온도는 각각 59$^{\circ}C$, 62$^{\circ}C$로서 초산 처리에 의해 5~6$^{\circ}C$ 낮아졌고, 초산 쌀 전분의 점도는 원료 전분에 비하여 14~38% 증가하였으며 추청벼 전분이 삼강벼 전분보다 높았다. 초산쌀 전분 입자의 표면구조는 원료 전분에 비하여 다소 팽윤되어 헝클어진 형태를 나타냈으며, 7$0^{\circ}C$ 30분 가열에 의해서 완전히 붕괴되었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.17-17
• /
• 1999

충돌제트는 산업, 항공우주, 군사 분야 등 공학적으로 많은 분야에서 응용되고 있다. 산업분야에서 충돌제트는 설치가 간단하고 형태가 단순하면서도 열 및 물질 전달효과가 상당히 크기 때문에 고효율의 열전달 효과를 얻을 수 있다는 점에서 광범위하게 응용된다. 예를 들면 물체 표면의 부분냉각은 고온 금형의 급속 냉각, 가스터빈 깃의 냉각, 전자부품의 냉각 등에 이용되며 부분 가열에서는 제철, 제지 및 유리공업, 금형의 풀림 등에 폭 넓게 적용된다. 항공우주, 군사분야에서는 수직/단거리 이·착륙기(V/STOL)의 발진, 미사일 발사시스템, 다단 로켓의 분리, 우주공간에서의 도킹, 화염 편향기 등에 적용이 되며 대부분 평판이나 특수한 판의 형상에 과소 팽창제트가 충돌할 때 발생하는 현상에 대한 것이다.

• Journal of Animal Science and Technology
• /
• v.50 no.2
• /
• pp.217-226
• /
• 2008

Product quality of low-fat sausages(LFSs) manufactured with two types(powder and hydrated) and two levels(0.5 and 1.0%) of Acorn powder was evaluated as a potential fat replacer. The addition of Acorn powder did not affect the product quality of LFSs (P>0.05), however 0.5% and hydrated Acorn was better sensory flavor than 1.0% and powder counterparts. The addition of Acorn into the LFSs decreased the expressible moisture(%) except for 0.5% powder type and decreased Hunter L-values in LFSs. The addition of 1.0% hydrated Acorn lowered sensory saltiness than those of other LFSs and regular-fat control. These results indicated that Acorn powder can be used to manufacture LFSs as a fat replacer and 0.5% with hydrated form had better characteristics than 1.0% and powder counterparts. Future research will be performed to prevent the color change with the addition of Arcon powder in LFSs.

• Korean Journal of Materials Research
• /
• v.2 no.1
• /
• pp.35-42
• /
• 1992

Thermal behavior of residue and damaged layer formed by reactive ion etching (RIE) in $CHF_3/C_2F_6$ were investigated using X-ray photoelectron spectroscopy(XPS) and secondary ion mass spec-trometry(SIMS) techniques. Decomposition of polymer residue film begins at $200^{\circ}C$ and above $400^{\circ}C$ carbon compound as graphite mainly forms by in-situ resistive heating. It reveals that thermal decomposition of residue can be completed by rapid thermal anneal treatment above $800^{\circ}C$ under nitrogen atmosphere and out-diffusion of carbon and fluorine of damaged layer is observed.

• Nuclear Engineering and Technology
• /
• v.24 no.1
• /
• pp.30-39
• /
• 1992

In this study, an integrated boration and dilution (INBAD) model is proposed to predict the required makeup flowrate for RCS boron concentration change and to analyze the boron concentration behavior at each subsystem within the RCS including CVCS during boration and dilution operation. The INBAD model is constructed by integrating an existing neutronic code and a boration and dilution model. The boration and dilution model has been developed for our specific purpose using the one-cell model and multi-cell model. In addition, in order to assess the boron concentration behavior more realistically, two important features such as variable pressurizer heater output and optional makeup mode (either direct or indirect injection) are implemented in this model. In order to demonstrate the usefulness of this model, the boron concentration behavior analysis at each subsystem were performed for both direct and indirect injection mode using YGN 3 and 4 design data. Also, the effect of pressurizer heater output on the primary loop boron concentration was investigated. The results showed that the boron concentration changes can be predicted accurately at each subsystem during boration and dilution operation.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.157-160
• /
• 2001

RS yields and swelling powers of cross-linked RS 4 starches and effects of RS 4 starches on the pasting profiles of RS 4 added wheat starch were measured using RVA. RS yields by AOAC method were different among RS 4 starches and RS levels were higher in low swelling RS 4 starches than moderate swelling RS 4 starches. Swelling power was different with botanical source of starch and preparing procedure of RS 4 starches. The pasting curves of RS 4 added wheat starches showed increasing initial pasting temperature and lower viscosity but the patterns were similar to those of wheat starch. The pasting viscosity pattern of RS 4 added wheat starches was related with swelling power of RS 4 starch.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.206-211
• /
• 2010

Zinc oxide(ZnO) nanoparticles were synthesized by reacting an aqueous-alcoholic zinc nitrate solution to sodium hydroxide under ultrasonic irradiation at room temperature. The fullerene($C_{60}$) and ZnO nanoparticles were heated individually in an electric furnace for two hours at $700^{\circ}C$. The morphology and optical properties of the $C_{60}$ and ZnO nanoparticles were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM) and ultraviolet/visible (UV-vis) spectroscopy. The photocatalytic activity of the heated and unheated the $C_{60}$ and ZnO nanoparticles for the decomposition of methylene blue(MB), methyl orange(MO) and rhodamine B(RhB) was examined using UV-vis spectroscopy.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.314-321
• /
• 1987

Post weld heat treatment (PWHT) of weldment of the low alloy Cr-Mo steel, in general, is carried out not only to remove residual stress and hydrogen existing in weldment but to improve fracture toughness of weld heat affected zone (HAZ). There occur some problems such as toughness decrement and stress relief cracking (SRC) in the coarse grained region of weld HAZ when PWHT is practiced. Especially, embrittlement of structure directly relates to the mode of fracture and is appeared as the difference of fracture surface such as grain boundary failure. Therefore, in this paper, the effect of heating rate on PWHT embrittlement under the various kinds of stresses simulated residual stress in weld HAZ was evaluated by COD fracture toughness test and observation of fracture surface. Fracture toughness of weld HAZ decreased with increment of heating rate under no stress, but it was improved to increment of heating rate under the stress. Grain boundary failure didn't almost appear at the heating rate of 600.deg.C/hr but it appeared from being the applied stress of 294 MPa at 220.deg.C/hr and 196 MPa at 60.deg.C/hr.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.9
• /
• pp.1144-1151
• /
• 2021

The pressing process is a compression process in which a product is made by applying force to a heated or unheated material to transform it into the desired shape. Due to the characteristics of press equipment that produces products through continuous compression for a short time, product defects occur continuously, and systems for solving these problems are being developed using various technologies. This paper proposes a real-time defect detection system based on an artificial intelligence algorithm that detects defects. By attaching various sensors to the press device, the relationship between equipment status and defects is defined and collected based on a big data platform. By developing an artificial intelligence algorithm based on the collected data and implementing the developed algorithm using an embedded board, we will show the practicality of the system by applying it to the actual field.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.74-74
• /
• 2012

섬유 프리프레그(Prepreg)는 강화섬유를 수지에 함침하여 B-stage로 만든 복합재료의 중간성형재료이다. 최종적으로 프리프레그를 금형에 적층하여 가열 가압하여 수지를 경화함으로써 최종제품이 완성된다. 본 연구에서는 직물형 프리프레그를 사용하였는데, 사용되는 직물형태로는 복합재료 성형공정에서 형태안정성이 우수한 평직물과 능직물이 주로 사용된다. 직물형 프리프레그를 사용한 복합재료는 작업성과 형태안정성이 우수하면서 내충격특성이 우수하여 오토바이용 헬멧, 방탄용 헬멧 등에 주로 사용된다. 프리프레그에 요구되는 주요 특성중 하나는 Tack성으로서, 성형 과정에서 프리프레그를 여러 장 적층할 때 적층된 층 간에 미끄러지지 않으면서 잘 고정되어 적층 작업을 원활하게 하는 역할을 한다. Tack성은 수지의 B-stage 경화 후의 점성 거동에 따라 변화될 수 있는 것으로 표면의 끈끈함의 정도로서 알 수 있다. Tack성은 온도에 민감하여 측정 시에 일정한 온도의 유지가 중요하다. 이러한 온도에 대한 민감성 때문에 프리프레그의 저장시 저온에서 저장하는 것이 원칙인데, 상온에 있을 경우 시간경과에 따른 Tack성 변화가 크게 나타나게 된다. 따라서 본 연구에서는 아라미드 섬유와 열경화성수지를 이용하여 프리프레그를 제조하고 이를 상온상태에서 보관 시 일정시간 경과에 따른 Tack성 변화를 알아보고자 하였다.