• Journal of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.152-160
• /
• 1979

The promoting effect of Ba or Sr addition was investigated for furfural hydrogenation reaction over copper-chromium oxide catalysts. X-ray diffraction patterns showed the appearance of $BaCrO_4$ and $SrCrO_4$ phases in Ba, and Sr promoted copper-chromium oxide catalysts. For both Ba and Sr promoted catalysts, the activity decline with reaction time was much smaller compared to that of unpromoted catalyst and copper-chromium oxide catalyst dispersed on silica, reproducible EPR signals of Cr(V) were observed when CO was adsorbed. The promoting effect of Ba addition can be interpreted in terms of active sites dispersion and stabilization.

• Journal of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.165-171
• /
• 1991

The electrochemical reduction of carbon-6-dibromo groups on 6,6-dibromo penicillanic acid 1,1-oxide(DBPA) was investigated by direct current, differential pulse polarography, cyclic voltammetry and controlled potential coulometry. The irreversible two electrons transfer on the reductive debromination of each bromo group proceeded by EC,EC mechanism at the two electrode reduction steps(-0.48, -1.62 volts). The 6-bromo-PA and 6,6-dihydro-PA was synthesized by controlled potential electrolysis. Upon the basis of results on the products analysis and interpretation of polarograms obtained at various pH, electrochemical reaction mechanism was suggested.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1766-1768
• /
• 2000

신장병 진단의 척도로 요소의 농도는 매우 중요하다. 요소의 농도를 측정하기 위한 센서개발이 본 연구의 목적이다. 기존의 Potentiometry법은 Nernst식이 적용된다는 가정하에 감도를 측정했다. 실험결과 전극상에서 우레아제의 요소 가수분해 반응은 Nernst식을 적용할 수 없는 비가역적인 반응으로 판단되어 센서의 감도 측정을 Linear sweep Voltammetry(LSV)법을 이용하였다. Voltammetry법은 가역적이든 비가역적이든 관계없이 Cottrell 식에 의한 전류와 농도의 직선관계로부터 감도를 측정할 수 있다는 장점이 있다. 센서 전극의 표면은 SEM으로 분석하였고, LSV 법으로 측정한 센서의 감도는 $34{\mu}A$/decade 였다.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.575-580
• /
• 2011

It was investigated into the effects on zinc corrosion of the rotation speed of Zn-RDE and the oxygen concentration in borate buffer solution. Zinc corrosion was heavily influenced on the rotation speed of electrode and the oxygen concentration. We have suggested the disproportion reaction following the reversible one electron transfer as the corrosion mechanism of zinc.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.508-508
• /
• 1986

이온성 계면활성제 존재하에서 유기용매에 물을 첨가하면 물이 계면활성제에 약해 둘러싸이면서 유기용매에 용해되어 의사 이상계가 형성된다. 이러한 계를 역미셀 또는 W/O microemulsion이라고 하며 계면활성제로 둘러 쌓인 물분자 집하체를 water pool이라고 한다. 그런데, 10여년 전 water pool에 bipolymer를 용해시킬 수 있다는 사실이 밟혀짐에 따라 이러한 체계를 생체막을 단순화시킨 모형막으로서 막을 통해 일어나는 여러 가지 현상의 규명에 이용하거나 물에 불용성인 기질의 효소 촉매반응의 반응계로 이용하는 연구가 꾸준히 이루어져 있다. 본 강연은 역미셀계에 리파제를 용해시켜 유지의 가수분해를 유도함으로써 지방산을 생산하는 방법에 관한 연구이다. 역미셀계에서 리파제의 특성은 에멀전계와 비교했을 때 큰 차이가 없었으며 물과 계면활성제의 몰 비율(R값)은 효소의 초기반응 속도에 커다란 영향을 끼치는 인자로 나타났다. 올리브유 농도가 5%(v/v), AOT농도가 0.1M, 초기 물 농도가 1.0M의 조건에서 유지의 회분식 가수분해 실험을 행한 결과 이 기질은 거의 완전히 가수분해되었으며, 이 반응계에서 R값과 초기 물 농도는 반응의 평형에 커다란 영향을 끼치는 것으로 나타났는데 초기 물 농도가 증가할수록 평형 가수분해율은 증가하였단 이러한 결과를 반응속도론 측면에서 분석한 결과 역미셀계에서 리파제 반응은 에멀전계에서와는 달리 2차 반응을 따르는 것으로 나타났다. 물 농도가 평형 가수 분해율과 속도 변수에 끼치는 영향을 수학적으로 표시하기 위하여 2차 가역적 반응 속도론에 근거하여 가수분해율, 평형상수, 속도상수 둥을 나타내는 식을 유도하였고 이를 바탕으로 여러 가지 실험 조건 하에서 리파제 반응의 반응 시간에 따른 가수분해율을 예측한 결과는 실제 실험 결과와 잘 일치하였다(편차는 5%). 또한 속도상수와 R값과의 관계식 및 유도한 방정식을 이용하여 추정한 초기속도와 평형 가수분해율을 최대화하는 R값은 각각 10.4 와 11.4 였다.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.395-401
• /
• 2014

In this work, the reaction characteristics for the non-catalytic esterification of palm fatty acid distillate were analyzed. The esterification reaction was assumed as the pseudo homogeneous $2^{nd}$ order reversible reaction and 'reaction effectiveness factor (${\eta}$)' was used to take accounts into evaporation and reaction of water and methanol, which take place simultaneously in the liquid phase. The nonlinear programming was used to derive appropriate kinetic parameters, the reaction rate constant and mass transfer coefficient, minimizing the error between experimental data and the numerical values. Based on these parameters, the apparent activation energy was calculated to be 43.98 kJ/mol.

• Tuberculosis and Respiratory Diseases
• /
• v.56 no.2
• /
• pp.144-150
• /
• 2004

Background : An assessment of the presence and the degree of reversibility of airflow obstruction is clinically important in patients with asthma or chronic obstructive pulmonary disease. However, the time responses of spirometric parameters in response to bronchodilator have not been well investigated. Methods: We studied 15 patients with asthma. Spirometric and mini-Wright peak expiratory flow measurements were performed at 15, 30, 45, and 60 minutes after using single dose($200{\mu}g$) of inhaled bronchodilator, salbutamol. Results : The mean values of forced expiratory volume in one second($FEV_1$) and forced vital capicaty(FVC) were significantly increased at 60 minutes after using bronchodilator in comparison to 15 minutes. And peak expiratory flow rate measured by either mass flow sensor or mini-Wright peak flow meter were significantly increased at 45 minutes after using bronchodilator in comparison to 15 minutes. Conclusions : To appropriate evaluation of the bronchodilator response in patients with reversible airflow limitation, it would be useful measuring either $FEV_1$ or PEF at the later time point 60 or 45 minutes in comparison to 15 minutes after using bronchodilator.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.1
• /
• pp.11-17
• /
• 2020

The Prussian blue analogues of Fe₂(CN)₆ and Na_xFe₂(CN)₆ are prepared by precipitation method and evaluated the electrochemical characteristics as positive electrode materials for lithium-ion batteries (LIBs) because of their low cost. Fe₂(CN)₆ shows a low reversible capacity of 34.6 mAh g^-1, whereas sodium-containing Na_xFe₂(CN)₆ exhibits a reversible capacity of 107.5 mAh g^-1 when the discharge process proceeds first. When charging is first carried out to remove sodium in the structure, the reversible capacity of 114.1 mAh g^-1 is achieved and the cycle performance is further improved. In addition, Na_x-Fe₂(CN)₆ is synthesized at 0℃, room temperature (RT), and 60℃, respectively. Regardless of the synthesis temperature, Na_xFe₂(CN)₆ shows similar initial reversible capacity, but the crystallite size is formed smaller and improved cycle performance when synthetic temperature is lower. The sample synthesized at 0℃ shows a reversible capacity of 86.4 mAh g^-1 at the 120^th cycle and maintains 76.8% of the initial capacity.

• Solar Energy
• /
• v.15 no.3
• /
• pp.29-38
• /
• 1995

The heat-storage characteristics accompanied by exothermic reaction at the regeneration of $Ca(OH)_2$ in tile heat-storage mode of a chemical heat pump system using a $Ca(OH)_2/CaO$ reversible thermochemical reaction was examined in a lab-scale unit. In this heat-storage mode, the particle bed of CaO could be regenerated by heating the $Ca(OH)_2$ packed bed to the higher temperature at which the equilibrium pressure in the reactor is greater than the water vapor pressure in the condenser. The results are i) the dehydration, thermal decomposition, rate of $Ca(OH)_2$ was higher at the lower part of particle bed than at the upper part, ii) in the reactor, the dehydration was proceeded along radial and axial direction, from inner part to the outer part, which explains heat transfers from the center to wall and from the tenter to lower or upper part of reactor.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.83-91
• /
• 1993

The eletrochemical behavior of light lanthanide complexes has been investigated by several electrochemical techniques in alkaline solutions. The composition of the complexes was determined by spectrophotometric method to be 1 : 1 and reduction mechanism was two steps 1 electron transfer reaction. The half wave potential of first peak depended on pH and cathodic current showed remarkably adsorptive properties. The results of DC and CV investigation demonstrated the quise-reversible nature of the electron transfer. The anion radical formed after first one electron reduction process, dimerizes to form dimer. The apparent irreversible behavior of the second wave is a result of the existence of a fast protonation following the second electron transfer. An exhaustive electrolysis was carried out at controlled potential of -1.80 V, deep blue color of the solution became progressively weaker, and then the solution became colorless solution. The final product of an exhaustive electrolysis is electro-inactive. The appearance of four steps may be explained by the fact the reduction of Ln-OCP elucidated ECEC mechanism.