• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.49-52
• /
• 2009

The response times of monopropellant thrusters at a pulse mode were investigated experimentally as design parameters and feed pressure conditions. Five different model thrusters as injection direction/uniformity, aspect ratio of reactor, volumes of manifold and chamber were designed. As a results, two parameters, aspect ratio and manifold volume, were directly related to response characteristics. Additionally, chugging instability at reaction chamber was observed when pressure drop across the catalyst bed was increased due to high aspect ratio or when low pressure was built at reaction chamber.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.652-656
• /
• 2018

In this study, effects of the reaction pressure were studied for petroleum-based pitch synthesis. A two-stage reaction process was performed based on different reaction pressure conditions. Each stage experiments for the two-stage reaction were consecutively carried out. The first stage was consisted of three different pressure conditions; high (10 bar), normal and low (0.1 bar). And the second stage was carried out at the normal and low (0.1 bar) pressure. The pitch synthesis was realized at $400^{\circ}C$ for 2 h. Thermal properties and molecular weight distributions of each samples were investigated by analyzing the softening point and MALDI-TOF data. Volatilized components during the pith synthesis were measured by GC-SIMDIS. In case of the first-step reaction with the high pressure condition, the low molecular weight component participated to the pitch formation more effectively and the pitch with the low softening point was obtained. However, for the case of the first-step with the low pressure, the low molecular weight component was vent outside and the partial coke formation occurred. Eventually, pitch properties such as the softening point and yield were controlled effectively by changing the pressure in the pitch synthesis reaction.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.863-866
• /
• 2009

• Nuclear industry
• /
• v.23 no.3 s.241
• /
• pp.42-48
• /
• 2003

가압 경수로는 원통형의 원자로 용기 안에서 핵물질을 반응시켜 고온$\cdot$고압의 물을 생성하는데 이 원자로 용기는 환형 주조물들을 서로 용접하여 만들어진다. 이 원자로 용기의 건전성을 확인하기 위해서는 용접부위에 결함이 발생되었는지를 주기적으로 정확하게 검사해야 한다. 한국원자력연구소는 원자력발전소의 핵심 기기인 원자로 용기의 용접부 결함을 수중에서 자동으로 검사, 탐지할 수 있는 $\ulcorner$원자로 자동 탐상 시스템$\lrcorner$을 개발하여, 울진 원전 6호기용 원자로 용기에서 실증 실험을 수행하였다. 이 원자로 자동 탐상 시스템은 물방개처럼 생긴 수중 탐상 로봇이 그 핵심으로서 이 로봇은 원자로 용기의 내벽을 타고 다니면서 수중 초음파 검사를 수행할 수 있는 획기적인 시스템이다. 본고에서는 개발된 원자로 자동 탐상 시스템을 소개하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.1037-1041
• /
• 2014

Slurry used for polishing semiconductors processed by exchange, pressurization, and multi-step feeding has been studied to investigate the effect of the size and shape of slurry particles on the oxide CMP removal rate. First, spherical silica sol was prepared by the ion exchange method. The spherical silica particle was used as a seed to grow non-spherical silica sol in accordance with the multi-step feeding of silicic acid by the ion exchange and pressurization methods. The oxide removal rate of both non-spherical silica sol and commercially available slurry were compared with increasing average particle size in the oxide CMP. The more alkaline the pH level of the non-spherical silica sol, the higher was the removal rate and non-uniformity.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.4
• /
• pp.295-299
• /
• 2002

The esterification of alcohols with acetic acid, lactic acid and citric acid was carried out in batch during the second distillation. Effect of various parameters, e.g. pH of reactant base spirit, temperature of distillation, time of distillation were studied. The parameter of distillation temperature was modified by atmospheric distillation and pressure distillation. The pressure(1.9 atm.) distillation was used in order to react and distill at high temperature. Compared with the base spirit concentration, ethyl acetate, ethyl lactate and iso-amyl acetate in esterification distillate increased by 2,890%, 6,410% and 52%, respectively. Major factors of the esterification with organic acids in distilled spirit making were molecular weight of the organic acid and pH of reactant base spirit.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.137-144
• /
• 1998

High-temperature superconducting joints between 61 filaments of Bi-2223 tapes were fabricated by chem-ical corrosion and repeated thermomechanical process. The silver sheath of the superconducting tape was chemically removed using chemical etchant(NH4OH:H2O2=1:1) from one side of each tape without altering the form of lap joint. The joined region was formed by uniaxial pressing and a series of thermomechanical process and then subjected to properties measurement and microstructural analysis. The critical current(Ic) variation and I-V characteristics along the joint were mesured with several configuration of proble points. Ic value of the transition region of the joint inthe multifilament tape which limit the total current carring capacity of the superconducting tape was higher than that of monofilament tape. But the transition ex-ponent n-value of the multi-filament tape was lower than that of monofilament wire due to the interaction of the individual superconducting core of the multi-filament. The critical current through the joint area was improved by respeated press and reaction annealing treatment.

• Nuclear Engineering and Technology
• /
• v.21 no.3
• /
• pp.205-215
• /
• 1989

The EVNTREISS code, used as a basis of the present work, is highly complex and versatile in comparison with the previous CET used in the WASH-1400 study. Since the construction of the EVNTREISS code is very complex and has not gone through a thorough validation and review process by an independent referee it is not surprising to find a few areas of improvement and several inherent problems of the code. The present study is thus initiated to identify all the problems and areas of improvement for the EVNTREISS code and modify the code according to the insights gained from the experience of reproducing the Zion containment response analysis performed at the Brookhaven National Laboratory. As a result of this study, several areas of improvement for the EVNTREISS code have been identified and a few problems of the code have been resolved in addition to the reproduction of the Zion results. Finally, the modified code can now be run by a personal computer and can be used in the analysis of a Large Dry PWR containment response for severe accidents.

• Journal of Hydrogen and New Energy
• /
• v.23 no.4
• /
• pp.337-345
• /
• 2012

To check effects of operating variables on reaction characteristics of WGS catalyst for SEWGS process, water gas shift reaction tests were carried out in a pressurized fluidized bed reactor using commercial WGS catalyst and sand(as a substitute for $CO_2$ absorbent) as bed materials. Simulated syngas(mixed with $N_2$) was used as a reactant gas. Operating temperature was $210^{\circ}C$ and operating pressure was 20 bar. WGS catalyst content, steam/CO ratio, gas velocity, and syngas concentration were considered as experimental variables. CO conversion increased as the catalyst content and steam/CO ratio increased. CO conversion at fluidized bed condition was higher than that of fixed bed condition. However, CO conversion were maintained almost same value within the fluidized bed condition. CO conversion decreased as the syngas concentration increased. The optimum operation condition was confirmed and long time water gas shift reaction test up to 24 hours at the optimum operating conditions was carried out.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.3
• /
• pp.10-13
• /
• 2016

The wet-air oxidation in gravity pressure reactor is effective for organic waste treatment with energy saving under high pressure and high temperature. But its oxidation control is difficulty because its multi-phase flow characteristics is very complicated. The flow characteristics of an oxidizer feed section in the gravity pressure reactor were investigated using numerical method which are verified by comparison with experimental results. In this study, the results showed that the flow rate of oxidizer have an effect on the generation of bubble around feed section.