• Geophysics and Geophysical Exploration
• /
• v.15 no.2
• /
• pp.102-115
• /
• 2012

The purpose of this paper is to review several different methods calculating gas hydrate saturations. There are three methods using downhole log data, core data (including pressure core), and seismic velocity data. Archie's equation using electrical resistivity of downhole log data is widely used for saturation calculation. In this case, Archie's parameters should be defined accurately. And the occurrence types of gas hydrate significantly affect to saturation calculation. Thus saturation calculation should be carefully conducted. The methods using chlorinity and pressure core data are directly calculated from core sample. So far, the saturation calculated from pressure core gives accurate and quantitative values. But this method is needed much more time and cost. Thus acquisition of the continuous data with sediment depth is realistically hard. The recent several results show that the saturation calculated from resistivity data is the highest values, while the value calculated from pressure core is the lowest. But this trend is not always absolutely. Thus, to estimate accurate gas hydrate saturation, the values calculated from several methods should be compared.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.424-424
• /
• 2006

• Journal of Energy Engineering
• /
• v.10 no.4
• /
• pp.363-369
• /
• 2001

Process design and performance evaluation were made for medium-size gasification combined/cogeneration plant. Based on the designed plant process configuration, the effects of $NO_x$ reduction techniques on the $NO_x$ emission, the power output, the efficiency and the stability of plant are investigated by applying various $NO_x$ reduction methods such as unsaturated/saturated nitrogen injection and fuel saturation of gas turbine combustor. The $NO_x$ reduction by nitrogen injection is more remarkable than that by fuel saturation, and its effect can be more enhanced by using saturated nitrogen. In addition, the applications of $NO_x$ reduction techniques accompany the improvement of plant power output and efficiency with the decrease of $NO_x$ emission, while it can cause unstable gas turbine operation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.177-186
• /
• 2002

This paper describes the magnetic flux leakage(MFL) type non-destructive testing(NDT) system to detect the 3D defects in underground gas pipe. Magnetic systems with permanent magnets and yokes are analyzed by 3D non-lineal finite element method(FEM) with optimum design. In case of under-saturation of gas pipe, sensing signals are too weak to detect. In case of over-saturation, the changes of the sensing signals are too low to detect the defects sensitively. So, the operating points of the magnetic system are optimized to increase the changes of the MFL signals. The effects of the depth and size of the defects on the sensing signals are analyzed to define the range and resolution of the MFL sensors. To increase the sensor's sensitivity, the back-yoke sensors are introduced and tested.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.11-20
• /
• 2002

This paper describes the magnetic flux leakage(MFL) type non-destructive testing(NDT) system to detect the 3D defects on underground gas pipe. Magnetic systems with permanent magnets and yokes are analyzed by 3D non-lineal finite element method(FEM) with optimum design. In case of under-saturation of gas pipe, sensing signals are too weak to detect. In case of over-saturation, the changes of the sensing signals are too low to detect the defects sensitively. So, the operating points of the magnetic system are optimized to increase the changes of the MFL signals. The effects of the depth and size of the defects on the sensing signals are analyzed to define the range and resolution of the MFL sensors. To increase the sensor's sensitivity, the back-yoke sensors are introduced and tested.

• Journal of the Korean Institute of Gas
• /
• v.22 no.2
• /
• pp.34-45
• /
• 2018

The cleat system in coalbed methane (CBM) reservoirs is generally occupied by water which liberated during the coalification process, and behavior of water have influence on CBM production performance. Therefore, it is essential to investigate the effect of the water saturation to operate the degasification process and predict the CBM production performance properly. In this study, type curve analyses were performed on CBM reservoirs under various water saturation to improve the prediction of production performance. A CBM reservoir models with fully-, modestly-, and undersaturated reservoir were built to get production data using GEM by CMG Ltd., and the data were matched with Fetkovich, Palacio-Blasingame(P-B), and Agarwal-Gardner (A-G) type curve. The results showed that undersaturated reservoir was successfully matched by A-G type curve, while the Fetkovich type curve was inappropriate for matching in the late time. The modestly saturated model could be almost corresponded with all the type curve methods at late production period. For the fully saturated model, after peak production had been reached, both P-B and A-G methods showed a proper match to the reservoir production data without long-term production period. Based on the results, merit and demerit of each type curve under specific water saturation were analyzed and listed. Therefore, it is believed that the production data analysis with proper type curve model considering water saturation can be performed to predict accurate production performance.

• Journal of the Korean Ceramic Society
• /
• v.12 no.4
• /
• pp.37-42
• /
• 1975

철(II)이온을 안정화 하기위하여, 2산화 규소와, 구상, 입방체상 및 침상의 서로 다른형태의 산화 제2철로부터 규산철을 합성하였다. 메타놀증기로 포화시킨 질소까스를 튜브로에 도입시켜 얻은 환원성 분위기속에서, 114$0^{\circ}C$에서 11$65^{\circ}C$의 온도범위에서, 가스유속을 0.13 및 0.25l/min. 로서, 환원시간 4-150분동안 교상반응을 진행하였다. 반응생성의 동태를 오르자트 가스분석으로 검토하였으며, 생성물의 확인은 X-선 회절시험 및 감량정량에 의하였으며, 결과는 다음과 같다. 1 : 1.1의 몰비로 혼합한 산화제2철과 2산화 규소의 경우, 가스유속이 0.13l/min일 때, 규산철 합성반응시간은 구상, 입방체상 및 침상산화철에 있어서 각기 8-27분, 10-16분 및 6-7분으로 구상의 경우가 범위가 가장 넓었다. 또한, 반응속도는 산화제2철의 표면적의 평방근에 비례하였고 반응시간의 평방근에 역비례하였다.

• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.149-156
• /
• 2021

A kraft recovery boiler produces steam for power generation by the combustion of black liquor from the kraft pulping process. Since saturated steam became superheated in a superheater above the furnace, it is important to increase the heat exchange efficiency for the superheated steam production and power generation. A nose arch at the bottom of the superheater is important for blocking radiation from the furnace which causes corrosion of the superheater. But the nose arch is the main reason for creating a recirculation region and then decreasing the heat exchange efficiency by holding cold flue gas after the heat transfer to saturated steam. In this study, the size of recirculation region and the temperature of flue gas at the outlet were analyzed by the nose arch structure using computational fluid dynamics (CFD). As a result, when the nose arch angle changed from 106.5° (case 1) to 150° (case4), the recirculation region of flue gas decreased and the heat exchange efficiency between the flue gas and the steam increased by 10.3%.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.297-300
• /
• 2009

본 연구는 Knife형 전극을 사용하여 $SF_6$와 $N_2/O_2$의 혼합체적률이 각각 100:0, 80:20, 60:40인 혼합가스에서의 캡 변화에 따른 연면방전 특성을 연구할 목적으로 교류고전압 인가 시 압력 (P), 전극간거리 (d) 및 사용된 가스의 변화에 따른 절연파괴특성을 연구 하였다. 본 연구를 통해 챔버 내의 P와 d가 증가할수록 연면절연파괴전압은 상승하다가 일정한 압력 이상에서는 포화하는 경향을 보였고, $N_2:O_2$의 혼합체적률이 100:0인 경우는 $SF_6$의 37%, 80:20은 47%, 60:40은 46%로 나타났다. $N_2:O_2$ 혼합가스 중에서 체적혼합비율이 80:20인 경우가 연면절연내력이 가장 좋게 나타났다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.56-56
• /
• 1999

수소화된 비정질 탄소(a-C:H0는 그 형성 조건에 따라서 여러 가지 다른 구조와 특성을 갖게 되며, 특히 DLC(diamond-like carbon)-FED(field emission display) 개발 면에서 중요하게 연구되고 있다. 본 연구에서는 a-C:H 박막을 PECVD(plasma-enhanced chemical vapor deposition) 방법으로 증착하고 주고 ESR 및 Raman 측정을 통하여 그 결과를 조사해 보았다. PECVD 증착가스는 CH4 가스를 사용하였다. 기판은 Corning 1737 glass를 사용하였고, 기판 온도는 32$0^{\circ}C$이었다. 증착 압력과 R>F. power는 각각 0.1-1 Torr 와 12-36 W 사이에서 변화되었다. ESR를 피하기 위하여, microwave power에 대한 ESR 신호 의존성을 측정하고 포화효과를 피하기 위한 Raman spectroscopy로 분석하였다. R.F.power가 증가할수록 증착속도는 0.06 nm/sec 정도까지 대체로 증가하였으나, pressure가 1 Torr 일때는 같은 R.F. power로써 증착이 일어나지 않는 경우도 발생하였다. 증착된 a-C:H 박막은 R.F.power가 증가할수록 스핀밀도의 증가가 두드러졌으며, 기타 증착가스 압력 등의 증착 조건에 따른 ESR 및 Raman 스펙트럼의 변화를 관찰하였다.