• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.330-330
• /
• 2010

하나로 노심에서 발생하는 열중성자를 감속재인 액체수소층을 통과시켜 냉중성자를 생산 하는 설비인 냉중성자원 시설은 초경량 합금, 신소재 및 DNA 구조연구 등의 첨단기술연구에 유용한 도구로 활용될 계획이며, 현재 원자력연구원에서는 냉중성자원 시설을 개발하여 제작 설치하였고, 이 장치들에 대해 기능시험을 수행하였다. 냉중성자원 시설계통에서 가스블랭킷계통은 수소의 외부누출을 방지하고, 진공용기를 포함한 수조내기기 내부로 공기 및 경수가 유입되지 않도록 하여 냉중성자원을 보호하기 위한 역할을 수행한다. 또한 가스블랭킷계통의 구성은 가스공급장치($N_2$ 및 He 가스 실린더로부터 가스공급 기능), 질소충압탱크, 진공박스, 수소박스, 밸브박스 및 각 구역별 독립 배관 등으로 되어있다. 이동식 진공배기장치는 가스블랭킷계통에서 사용하기 위해 특수하게 제작된 장치로서 진공계통과 수소계통의 초기충진 시 또는 계통배기 시 잔류가스를 제거하거나, 블랭킷가스의 오염검사를 위한 시료채취 기능 등을 수행할 수 있도록 되어있다. 본 논문에서는 냉중성자원장치 내의 수소계통 및 진공계통의 배관과 기기를 외기와 경수로부터 안전하게 격리시키기 위해서 제작설치 적용된 가스블랭킷계통에서 이동식 진공배기장치를 이용하여 잔류가스 제거방법과 각 가스블랭킷 영역으로부터 시료를 채취하여 수행된 산소농도 분석에 대해 기술하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.10b
• /
• pp.150-156
• /
• 1996

본 연구에서는 Alaska Usibelli 아역청탄이 사용되는 실린더형 석탄 가스화기내에서 석탄의 입자크기가 반응성 유동장과 주요 생성물의 농도분포에 미치는 영향을 고찰하기 위하여 미분탄 입자의 크기를 40$mu extrm{m}$, 60$\mu\textrm{m}$, 100$\mu\textrm{m}$, 120$\mu\textrm{m}$ 및 140$\mu\textrm{m}$로 각각 나누어 전산모사를 수행하였다. 모사결과, 가스화기 내에서 석탄의 입자크기가 가스화 생성물의 농도와 유동장에 커다란 영향을 미침을 알 수 있었다. 입자의 크기가 100$\mu\textrm{m}$일 때 가스화기 출구에서 주 생성물인 CO와 H2가 초대로 생성되고 이때 이들의 평균 몰분율은 각각 0.62, 0.16(dry basis, inert free)으로 예측되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.733-742
• /
• 2016

In recent years, gas engines fueled with LNG or synthetic gas have been attracting considerable attention for marine use owing to their potential to facilitate better fuel economy and to reduce emissions. It has been confirmed that gas engines using the Otto cycle, which involves premixed combustion, can satisfy Tier III regulations without the EGR or SCR system. The objective of this study is to acquire simulation technologies for predicting gas engine performances in industrial fields. Using the commercial software BOOST, the simulation is conducted on a gasoline engine rather than a marine engine due to the gasoline engine's easier accessibility. This study consists of two stages. In the first stage published previously, the optimal modeling techniques for representing the behavior of the gas in the intake and exhaust systems were determined. In the current study, we formulated a method to evaluate the combustion and heat transfer processes in the cylinder and to ultimately determine the major performance parameters, given that the analytical model derived from the previous stage has been applied. Through this study, we were able to determine a combustion and heat transfer model and a valve discharge coefficient that are less reliant on empirical data: we were also able to formulate a methodology through which relevant constants are decided. We confirmed that the values of transient cylinder pressure variation, indicated mean effective pressure, and air supply can be successfully predicted using our modeling techniques.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.321-325
• /
• 2000

Gasket of vehicle engine maintains airtight between cylinder head and engine block under high temperature and pressure, and plays important role in heat conduction of engine. And the characterization of the nonlinear behavior of metal gasket fer various bead shapes is very important as basic research for estimation of gasket durability. But it is very difficult to analyze the behavior of gasket In real experiment. In this paper, to analysis effects of the bead shape on the nonlinear behavior of cylinder head gasket under uniform pressure, the virtual experiment using the nonlinear finite element method was performed. Results are analyzed with residual deformation and the sealing pressure. With the increase of the height and the width of bead, the residual deformation and the sealing pressure increase. And if the height is very high and the width is very narrow, the wrinkles are occurred in the gasket while working.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.102-109
• /
• 2000

In the present study, gas-assisted molding and structural vibration analysis of hollow long cylinder with the variation of gas injection pressure are performed. Though there are so many parameters such as delay time, injection pressure, and gas pressure on gas-assisted molding, the latter has the most dominant effect on this process. Therefore, the present paper deals with the effects of gas pressure on the dynamic stiffness of the model by means of vibration analysis and then suggests the fundamental materials which can be directly adapted to manufacturing lines.

• Tribology and Lubricants
• /
• v.21 no.6
• /
• pp.296-301
• /
• 2005

피스톤-실린더-링 틈새를 통해 일어나는 오일소모와 브로바이가스 증가는 최소화되어야 하며, 한편으로는 연료저감 및 성능증가 개선 측면에서 피스톤 링 팩의 마찰 손실도 줄일 필요가 있다. 이러한 두 가지 측면에서, 피스톤 링 팩의 최적 설계에 대한 연구가 수행되어야 한다. 따라서 오일소모 및 브로바이가스의 앙은 엔진개발과정 및 필드에서의 엔진운전 중에 엔진의 상태가 좋은지 나쁜지를 판단하는 중요한 요인이 된다. 본 연구의 목적은 연소실 내로의 오일 흐름 량과 피스톤 링 팩을 지나 아래로 내려가는 가스흐름을 계산하여 엔진오일 소모 및 브로바이가스를 예측하는 컴퓨터 프로그램을 개발하는 것이다. 향 후 본 프로그램을 이용하여 엔진의 상태를 미리 예측할 수 있을 것으로 본다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.176-183
• /
• 2014

Acoustic emission testing (AET) of cylinders is advantageous in that it can be directly conducted on cylinders installed in a car, without needing to dissemble them on a real-time basis. Therefore, users prefer AET over other nondestructive testing methods. Owing to these advantages of AET, it has been approved by the Department of Transportation of the U.S. as a safety evaluation method for pressure containers or as an alternative to the hydroproof testing method. This paper presents a study of the quantitative evaluation criteria for a container having ultrasonic testing defects and also for Type 1 and Type 2 gas cylinders, which are defective seamless pressure containers provided by NK, a manufacturer of pressure containers. For the Type 1 cylinder, the process from crack growth to leak was observed in a repetitive fatigue test using a 113 L container according to ASTM E 1419-02. Further, for the Type 2 cylinder, integrity was evaluated using a 119 L sound container and a container damaged by hydraulic pressure, by the slow-fill method according to ASTM E 2191-02. Based on the AET results of the Type 1 and Type 2 cylinders, quantitative evaluation criteria were established for a defective and non-defective container.

• Journal of the Korean Institute of Gas
• /
• v.20 no.4
• /
• pp.15-24
• /
• 2016

In the semiconductor industry, the risk of chemical accidents due to miscibility between the many types of chemicals and leakage of toxic chemicals has increased. In order to evaluate the reactivity with miscibility of chemicals, experimental method is the most reliable, but there is a time and cost limitations to be evaluated through experiment all the chemicals. In the study, the reactivity of process gases in the semiconductor industry was considered by the CRW (Chemical Reactivity Worksheets) 3.0 program developed by US NOAA (National Oceanic and Atmospheric Administration) and EPA. The reactivity informations with the miscibility of process gases for semiconductor industry provided, and also a KOSHA guide for the storage/separation of gas cylinders in dispensing cabinets in the semiconductor industry was proposed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.405-411
• /
• 1999

Dynamic effect of gas in exhaust manifold influences the volumetric efficiency of the engine. Especially in case of multi-cylinder engine the shape of exhaust manifold is important for the opti-mum design of exhasut manifold complicated. In this paper the effects of exhaust manifold systems on volumetric efficiency were investigated for the 4 cylinder 4 stroke-cycle diesel engine. Volumetric efficiency was calculated by the method of characteristics. The calculation results coincided well the test results. This study showed that the appropriate position and diameter of exhaust manifold branch are important factors in increasing volumetric efficiency and decreasing pumping loss.

• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.2
• /
• pp.1-12
• /
• 1986

입자상물질을 저감시키는 방법은 크게 두 가지로 나누어진다. 하나는 기관내에서 연소조건을 개 선하여 연소방응시 입자상물질이 가능한한 적게 생성되도록 하는 기관개량(Engine Modification) 방법 즉, 실린더 내에서의 저감기술(In Cylinder Control Techniques)이며, 다른 하나는 기관내에 서 생성된 입자상물질이 대기중에 배출되기 전에 배기관으로부터 직접 제거하는 기술이다. 보통 실린더 내에서의 저감기술이 가장 바람직한 방법으로 지금까지는 이 분야의 기술이 많이 개발 되어 왔으나 디이젤자동차에서 배출되는 입자상물질의 허용기준이 강화됨에 따라 기관 내에서의 저감기술만으로는 목표달성이 어렵기 때문에 그 후처리기술이 필요하게 되었다. 여기서는 최근 까지 연구된 저감장치에 관하여 간단히 소개하고 선진국에서 실제 자동차에 부착사용되고 있거나 가장 효율적이며 사용가능성이 높아 연구되고 있는 입자상물질 필터 및 트랩과 그 재생장치에 대하여 상세히 기술하고자 한다.