• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.5
• /
• pp.285-292
• /
• 2015

In this study, we were clearly identify the behaviour characteristics on particle size distribution of a condensing species by injection condition of HMDS (Hexa Methyl Di-Silazane, silica precursor that is one of liquid adsorbents) to remove condensing gaseous species as using pyroligneous liquor generated during carbonization process of biomass as precursor of condensing gaseous species. When using HMDS to remove the condensing gaseous species by growth machanism of particles, we could be controlled properly particles size such as amount of adsorbent injection, residence time, heating temperature and MFC flux. Especially, in case of using the silica precursor, in consideration of the physical and chemical properties of the boiling point, the specific gravity and the molecular weight, we found that the condensing species could be effectively controlled by particles granulation.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.1
• /
• pp.15-21
• /
• 2017

WHO reported that millions of people die every year because of diseases induced from environmental pollution. In 2012, approximately 7 million people were killed due to air pollution. Major cause of such pollution includes toxin, chemical waste, radiation and air pollution. Therefore, the significance and interest to indoor air quality has been continuously increased. Especially, the interest in radon, the ARC group 1 carcinogen, is rapidly increasing, and banning the use of construction materials that release radon, repairing aged buildings, and developing ventilators. To reduce the level of radon gas was inflowed to indoors and outdoors, this study is to research and develop a radon gas absorption board using absorbents. The absorbents utilized to absorb the radon gas were porous diatomite, natural zeolite, 4A zeolite and 13X zeolite and employed bentonite and illite, montmorillonites with the property of exchanging anions. As the main binder, magnesium oxide was used, with a content of 25% magnesium chloride.

• Fire Science and Engineering
• /
• v.18 no.2
• /
• pp.12-19
• /
• 2004

The commercially available IG-541 extinguished agent composed of inert gases was developed for environmental protection. The extinguished agents were considered in terms of physical properties, efficient characteristic, environment, stability, and economical efficiency. The pure and mixture components of physical properties of $N_2$, Ar and $CO_2$ were chosen and compared. The physical properties of density, viscosity and surface tension of inert gases were plotted with the molar ratios of $N_2$/$CO_2$ and Ar/$CO_2$ in terms of a temperature. The extinguished agent in the composition of $N_2$, Ar and $CO_2$, 50/40/10 (mol %) showed relatively high density, low viscosity and moderate surface tension, therefore it was suitable for the alternative extinguished agents.

• Journal of Energy Engineering
• /
• v.20 no.3
• /
• pp.178-184
• /
• 2011

Compressed Air Energy Storage (CAES) is a combination of energy storage and generation by storing compressed air using off-peak power for generation at times of peak demand. In general, both charging and discharging of high-pressure vessel are unsteady processes, where the pressure is varying. These varying conditions result in low efficiencies of compression and expansion. In this paper, a new constant-pressure CAES system to overcome the current problem is proposed. An energy analysis of the system based on the concept of exergy was performed to evaluate the energy density and efficiency of the system in comparison with the conventional CAES system. The new constant-pressure CAES system combined with pumped hydro storage requires the smaller cavern with only half of the storage volume for variable-pressure CAES and has a higher efficiency of system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.236-236
• /
• 2010

알루미늄 자체에 대한 질화 기술의 어려움 때문에 현재까지는 AlN 분말을 이용한 소결 공정을 통하여 주요 부품의 제작이 되어 왔으며. Al 질화 기술보다는 아노다이징과 같은 표면 산화 공정 또는 도금과 같은 기술이 선호되어 왔다. 알루미늄 질화 기술이 잘 사용되지 않았던 이유는 알루미늄 표면에 2 5 nm 두께로 존재하는 치밀한 산화층의 높은 안정성 때문에 질화반응이 어렵기 때문이다. 이 알루미늄 산화물의 안정성은 질화물에 비교하여 5 배까지 높으며, 이런 경향은 온도가 높아짐에 따라 더욱 커지기 때문이다. 특히, 알루미늄의 낮은 기계적 물성을 향상시키기 위해서는 충분히 깊은 두께로 형성되어야 할 필요성이 높으나 알루미늄에 대한 질소의 고용도가 거의 없고 확산 계수가 매우 낮기 때문에 충분히 두꺼운 질화층의 형성이 어렵기 때문이다. 결국, 알루미늄 질화가 가능하기 위해서는 표면의 산화층을 없애야 하며, 알루미늄이 AlN이 되려는 속도는 $Al_2O_3$를 만드려는 속도보다 매우 느리므로, 잔존 산소량을 최소화 할 필요성이 있어서 고진공 분위기에서 처리되어야 한다. 일반적으로 알루미늄 질화를 위해서는 $10^{-6}\;torr$ 이하의 고진공도의 챔버가 필요하며 고순도의 반응 가스를 사용하여야 한다. 그러나 이러한 고진공하에서는 낮은 이온밀도 때문에 신속질화가 기존의 공정시간인 20시간동안, AlN층이 5um이하로 형성되었다. 본 연구에서, 알루미늄의 질화에 있어서, 표면층에 높은 전류를 걸어주어, 용융상태로 만들어주는 것이 좋다는 연구 결과를 얻었으며, 이를 토대로 신속질화를 위하여 전류밀도(전력량)에 따라 알루미늄 질화층의 형성 정도를 연구하였다. SEM, EDS, XRD등을 통해 Al의 표면에 플라즈마 질화를 통해 Al에 질소의 함유량이 증가하는 것을 확인하였으며 광학현미경을 통해 질화층의 두께와 표면조직을 확인하였다. Al 시편의 표면을 효과적으로 활성화할 수 있는 $400^{\circ}C$ 이상의 온도에서 전류밀도(전력량)와 시간의 변화에 따라 질화층이 효과적으로 형성되는 조건과 시간에 따라 두께가 증가하는 경향을 확인할 수 있었다. 이러한 신속 질화 공정을 통해 2시간 이내의 질화를 통해 40um이상의 AlN층을 형성할 수 있었다.

• Clean Technology
• /
• v.15 no.1
• /
• pp.42-46
• /
• 2009

Solvent-free direct preparation of dichloropropanol (DCP) from glycerol (by-product of bio-diesel production) and hydrochloric acid gas was carried out over acetin catalyst in a gas-liquid batch reactor. For this purpose, acetin mixture and triacetin were used as a homogeneous acetin catalyst. Performance in the acetin-catalyzed reaction was compared to that in the non-catalytic reaction under the same reaction conditions ($110^{\circ}C$, 3 bar, 3 h). Conversion of glycerol in the acetin-catalyzed reactions was ca. 3% higher than that in the non-catalytic reaction, and selectivity for dichloropropanol in the acetin-catalyzed reactions was ca. 50% higher than that in the non-catalytic reaction. It was also revealed that the catalytic performance of triacetin was ca. 2% higher than that of acetic mixture.

• Nuclear Engineering and Technology
• /
• v.24 no.2
• /
• pp.141-153
• /
• 1992

Excess tritium analysis was peformed to verify whether or not cold fusion occurs during electrolysis of heavy water in the current density range of 83~600 mA/$\textrm{cm}^2$ for a period of 24 ~ 48 hours with use of palladium electrodes of seven different processing treatments and geometries. The extent of recombination of D$_2$ and $O_2$gases in the electrolytic cell was measured for the calculation of accurate enthaplpy values. The behavior and interaction of hydrogen atoms with defects in Pd electrodes were examined using the Sieverts gas charging and the positron annihilation(PA) method. Slight enrichment of tritium observed was attributed to electrolytic enrichment but not to the formation of a by-product of cold fusion. The extent of recombination of D$_2$and $O_2$gases was 32%. Hence the excess heat measured during the electrolysis was considered to be due to the exothermic reaction of recombination but not to nuclear fusion. Lifetime results from the PA measurements on the Pd electrodes indicated that hydrogen atoms could be trapped at dislocations and vacancies in the electrodes and that dislocations were slightly more preferred sites than vacancies. It was also inferred from R parameters that the formation of hydrides was accompanied by generation of mostly dislocations. Doppler broadening results of the Pd electrodes indicated that lattiec defect sites where positrons were trapped first increased and then decreased, and this cycle was repeated as electrolysis continued. It can be inferred from PA measurements on the cold-rolled Pd and the isochronally annealed Pd hydride specimens that microvoid-type defects existed in the hydrogen-charged electrode specimen.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.214.1-214.1
• /
• 2016

최근 대기압 플라즈마의 활용분야는 기판의 표면처리, 바이오 분야 등에 널리 활용되고 있지만, 현재까지 정립된 대기압 플라즈마 분석법은 광학적, 전기적 방법으로 이를 통해 대기압 플라즈마를 분석하는데 어려움을 겪고 있다. 가장 널리 사용되는 OES(Optical Emission Spectroscopy) 측정법의 경우에는 플라즈마로부터 방출되는 광을 측정하여, 방출 강도로부터 플라즈마 밀도를 얻는데 어려운 점이 있다. 전기적 진단법 중 하나인 랑뮤어 탐침은 주로 진공장비에서만 사용가능하며, 대기압플라즈마에서 직접 접촉하여 플라즈마에 영향을 주어, 플라즈마 밀도를 정확히 측정하기 어렵다. 본 연구에서는 대기압 플라즈마의 캐페시턴스을 측정하여 플라즈마의 밀도를 측정하였다. DC power supply에서 발생된 DC전원을 인버터를 통해서 AC전원으로 변환한 뒤, Ar가스를 석영관에 주입하여 대기압 플라즈마 젯를 발생시켰다. 발생된 대기압 플라즈마를 석영관 외부 전극 사이에 캐패시턴스로 플라즈마 밀도를 측정하였다. Ar 가스 유량에 따라 플라즈마 밀도를 변화를 살펴보았다.

• Journal of the Korean Institute of Gas
• /
• v.14 no.2
• /
• pp.22-26
• /
• 2010

In this study, experimental vapor pressures and densities of vapor and liquid phases versus temperature were estimated using PC-SAFT equation. The estimated results were compared with those using PR equation of state. For the vapor phase densities, both equations well predicted the literature data. However, PC-SAFT equation showed better prediction capability for liquid phase densities. In the comparison of vapor-liquid equilibrium prediction capability for the binary systems of methane and ethane, PC-SAFT equation was better than the PR equation.

• Journal of the Korean Institute of Gas
• /
• v.11 no.1 s.34
• /
• pp.51-54
• /
• 2007

78-cell proton exchange membrane fuel cell(PEMFC) stack with an effective electrode area of $295cm^{2}$ were investigated its operational characteristics and effects of CO poisoning. When power output, 5.4 kW, was released at current density of $325mA/cm^{2}$ for 6 hours, stablility of each cell was showed the small deviation of 2.3%. Carbon monoxide is a conventional contaminant in the fuel obtained from reforming processes with an important influence on the performance of the PEMFC. The studies of continuous injection of CO presented (5-20 ppm) with the time gave information about poisoning and recovery processes of the stack.