• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.4
• /
• pp.809-816
• /
• 2001

This is a fundamental study to improve the performance of the LPG engine. The result were summarized as followed. 1. The measured torque and power on the fuel of LPG were indicated about 8% lower than those on gasoline with the same compression ratio. 2. In the case of LPG, BSFD at compression ratio of 9.7 was about 5% lower than that of 8.3 at 3,000ppm 3. HC and CO concentrations of the LPG were lower about 53%, 35% than those of gasoline

• 전기의세계
• /
• v.41 no.12
• /
• pp.21-30
• /
• 1992

내연기관의 가솔린자동차보다 역사가 오래된 전기자동차는 상대적으로 주생성능과 가격 경쟁력의 열세로 그 자취를 감추었고 최근까지 주로 특수목적의 단거리 저속차량으로 사용되고 있다. 그러나 1890년대 후반부터 전세계가 자동차배기가스에 의한 대기오염과 지구온난화 현상등의 문제를 심각하게 공감하게 되었고 마침내 미국 캘리포니아주에서는 전가자동차의 강제판매를 규정화하게 이르렀다. 이 규정에 의하면 1998년도부터 차량 판매대수의 2%를 전기자동차 판매로 강제요구하고 있다. 이 비율은 2000녀도에 5% 2003년에는 10%로 늘어날 계획이다. 따라서 미국에 많은 자동차를 수출하고 있는 일본, 독일 및 여러 유럽국가에서는 이 사업에 막대한 자금을 투자하며 개발에 몰두하고 있다. 미국의 Big3도 에너지성의 도움으로 최근 USABC를 결성하여 전기자동차 개발에 박차를 가하고 있다. 지금까지 기존의 가솔린자동차 기술에 있어서 일본과 독일에 상대적 열세에 있었던 미국도 이번 캘리포니아주의 전기자동차 강제판매 규정에 따른 전기자동차 사업으로 미국자동차 시장의 새로운 판도를 조성하겠다는 의도인듯하다. 국내에서도 정부가 이 사업의 중요성을 심각히 인식하고 G7사업과제의 하나로 선정하여 산, 학, 연 각층의 전문가가 참여하여 성공적으로 개발을 마칠 수 있도록 적극 지원하고 있다. 지금까지의 평균주행성능을 보면 최고속도 100-120km/h, 일층전 최대주행거리 150-200km 정도이며, 아직 양산체제에 돌입하지 않았기 때문에 가격면에서 경쟁력이 없는 실정이다. 그러나 1990년도에 들면서 각종 요소부품들의 기술수준이 급성장을 이루어서 앞으로 10년정도 후면 성능과 가격면에서 가솔린자동차와 대등한 수준의 전기자동차 개발이 실현될 수 있으리라 예측된다.는 영향받지 않았다. Clonidine의 심박수 감소작용은 .뇌실내및 정맥내 diltiazem이나 nifedipine 처리후에 감약되었다. 5). 뇌실내 clonidine$(30{\mu}g)$ 처 리후 뇌실내 diltiazem$(400{\mu}g)$과 nifedipine$(350{\mu}g)$의 혈압하강및 심박수 감소효과는 영향 받지 않고 그대로 나타났다. 이상의 결과로 diltiazem과 nifedipine은 가토뇌내에서 methoxamine에 의한 혈압상승의 작용점인 alrfia-1 adrenoceptor의 흥분에는 영향을 미치지 못하나 clonidine의 작용점인 alpha-2 adrenoceptor의 흥분에 의한 혈압하강및 심박수 감소효과는 억제한다고 추론하였다.thin 함량은 110.6 mg/L로서 산업적인 생산성이 있는 것으로 나타났다. 이번 연구를 통하여 개발된 변이주 B76 및 이의 대량 발효를 위한 최종조건의 정립은 향후 astaxanthin의 산업적 생산공정에 필요한 기초자료로 이용될 것으로 기대된다.색총말내에 소형의 도형, 소형의 장형 연접소포 및 DENSE CORE VESICLE의 3가지 연접소포를 가지고 있었고 출현빈도수는 촉각엽에서 가장 큰 33%이었다. 제5형 신경연접은 축색종말내에 중등도크기의 원형, 대형의 원형연접소포 및 DENSE CORE VESICLE을 포함하였고 13%의 출현빈도수로 관찰되었다. 배추횐나비의 촉각에 있는 지각신경세포가 뇌의 촉각엽으로 뻗어 들어가 위의 5가지 신경연접중 어느 형을 형성하는지를 관찰하기 위하여 좌측 촉각의 기부를 제거하여 지각신경세포를 절단하였는데 그 결과, 좌측 촉각엽에서 제4형의 신경연접이 퇴행성 변화를 나타내었다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.35-43
• /
• 2008

Technical trends of propulsion system for small aircraft are investigated. Currently, most small aircraft are equipped with piston engine, turboprop and turbofan engines, and the technology development is going continuously. For piston engines, new diesel engines are arising besides gasoline engine. The diesel engines use relatively low-cost and easy to get fuel(Jet A), so the demand for small aircraft is getting increased, and new engines with high reliability and efficiency are being developed. For gas turbine engines, application of small turbofan is getting increased for newly arising VLJ market and the engine demand will be rapidly increased in the future. On the other hand, some electric propulsions without fossil fuels are being developed without high cost of fuel and environmental effects. In the future, propulsion system for small aircraft will be developed having enhancement of performance and efficiency with higher reliability and safety.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.733-742
• /
• 2016

In recent years, gas engines fueled with LNG or synthetic gas have been attracting considerable attention for marine use owing to their potential to facilitate better fuel economy and to reduce emissions. It has been confirmed that gas engines using the Otto cycle, which involves premixed combustion, can satisfy Tier III regulations without the EGR or SCR system. The objective of this study is to acquire simulation technologies for predicting gas engine performances in industrial fields. Using the commercial software BOOST, the simulation is conducted on a gasoline engine rather than a marine engine due to the gasoline engine's easier accessibility. This study consists of two stages. In the first stage published previously, the optimal modeling techniques for representing the behavior of the gas in the intake and exhaust systems were determined. In the current study, we formulated a method to evaluate the combustion and heat transfer processes in the cylinder and to ultimately determine the major performance parameters, given that the analytical model derived from the previous stage has been applied. Through this study, we were able to determine a combustion and heat transfer model and a valve discharge coefficient that are less reliant on empirical data: we were also able to formulate a methodology through which relevant constants are decided. We confirmed that the values of transient cylinder pressure variation, indicated mean effective pressure, and air supply can be successfully predicted using our modeling techniques.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2008.04a
• /
• pp.161-166
• /
• 2008

This paper searched through mixture ratio response test whether exert effect that is some in part load performance of engine according to inlet valve angle in gasoline engine. Engines that inlet valve angle is narrow decreased quantity of NOx among exhaust gas than engine that inlet valve angle is wide, and ignition timing was retard, and fuel consumption improved a little. That quantity of NOx among exhaust gas decreases and ignition timing was retard can judge that fast burning occurred. Fast burning can decrease output decline and misfire that can happen at lean burning. Can be judged by thing which engine's combustion performance improves if inlet valve angle is narrow if examine test result.

• Journal of Advanced Technology Convergence
• /
• v.2 no.3
• /
• pp.17-24
• /
• 2023

I am designing a research paper with the aim of studying hybrid vehicles. Hybrid vehicles, as the next-generation automobiles, feature a combination of internal combustion engines and battery engines, resulting in a revolutionary reduction in fuel consumption and harmful gas emissions compared to conventional vehicles. The electric motor in hybrid cars derives power from a high-voltage battery installed within the vehicle, which is recharged during vehicle motion. In contrast to traditional cars, which often experience energy losses due to idling caused by traffic congestion, hybrid systems optimize efficiency by skillfully managing the interplay between the internal combustion engine and the electric motor. This approach effectively addresses the inherent drawbacks of gasoline or diesel engines.Hybrid cars offer an array of benefits, including improved fuel efficiency, environmental friendliness, cost-effectiveness, and reduced noise emission. Consequently, they are progressively becoming a favored alternative among a growing number of individuals. This research endeavor has the potential to contribute towards curbing environmental pollution and dedicating efforts to future automotive research.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.101-102
• /
• 2014

Rising oil price and environmental problems are causing automotive industry to increase fuel efficiency. Improved fuel efficiency in gasoline engine was made possible by development of DISI gasoline engine. Since fuel is injected inside cylinder directly, in-cylinder temperature can be reduced than multi-port injection engine and this leads to increased compression ratio. However, engine performance is largely dependent on mixture formation process due to in-cylinder fuel injection. Especially for spray guided and air guided DISI gasoline engine, injection direction is important factor to mixture preparation. It is because interaction between intake flow and spray affect fuel-air mixture. Hence, in this study, mixture formation characteristics were analyzed by varying injection direction using KIVA 3V release2 code. Residual gas was considered for assuming combustion. Therefore, initial condition for in-cylinder temperature was set equal to the end state of exhaust stroke of combustion cycle. Since angle between intake air flow direction and spray direction affects fluid flow and evaporation field, mixture distribution was affected by fuel injection direction dominantly.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.50-56
• /
• 2006

Residual gas fraction in a combustion process is very crucial to improve combustion and cyclic variations. Especially, the residual gas fraction is strongly affected by backflow of the residual gas during the valve overlap period in an idle operation. Therefore, it is one of the most interesting that valve timings can affect flow characteristics of gas exchange process, especially during idle operation. This analysis investigates residual gas fraction with respect to valve timing changes which is critical for combustion efficiency and engine performance. Flow characteristics of residual gas by changing intake and exhaust valve timing are calculated by CFD methodology during an idle operation in an SI engine. It is analyzed that retarded EVO and advanced IVO results in the increase of valve overlap period and consequently, residual gas fraction. Futhermore, changes in IVO have stronger effects on variation of residual gas fraction.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.211-221
• /
• 1998

Thermal behavior on the cylinder block of a 4-cylinder, 4-stroke 2.0L SOHC gasoline engine was numerically and experimentally analyzed. The numerical calculation was performed using the finite element method. The cylinder block was modelled as a three dimensional finite element by considering its geometry. The physical domain was devided into hexahedron elements. 16 thermocouples were installed at points of 2mm inside from cylinder wall near top ring of piston in cylinder block, which points have suffered major thermal loads and suggested as proper measurement points for engine design by industrial engineers. Under full load and 9$0^{\circ}C$ coolant temperature condition, temperature behavior of cylinder block according to engine speed were analyzed. The results showed that temperature rose gradually to conform to a function of 2nd~4th order of engine speed at intake side, exhaust and siamese side, respectively. As engine load was changed from 100 to 50% by 25% step, temperature curve also conformed to 2nd~7th order function of engine speed. Temperature differences by load condition were similar among 100, 75% and 50%. Under full load and coolant temperature of 11$0^{\circ}C$, temperature behavior were also analyzed and the result also showed conformance to 2n d~7th order function of engine speed. Temperature curve was transferred in parallel upwards corresponding coolant temperature rise.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.3
• /
• pp.1-10
• /
• 1985

한국의 자동차산업은 생산능력이 경제단위로 들어서고, 수출을 통해 선진국 자동차산체와 세계시 장에서 경합을 하지 않으면 안 될 성년기에 접어들고 있다. 따라서 경험적 강화를 위해서는 생 산단위의 증가 뿐만 아니라 자체기술개발능력도 향상해야 한다. 기술개발의 첫째 화제가 현재 외국으로부터 기술도입한 제품의 자체개발이 대상으로 된다는 것은 재론의 여지가 없다. 그러나, 앞으로 제품개발을 해 나가는데 수반되는 기술개발을 효과적으로 하기 위해서는, 선진자동차산 업의 기술개발동향과 Marketing차원에서 시장변활를 연밀히 분석, 검토함으로써 기술개발과제를 중점적으로 선택하고, 연구설비투자와 연구인력을 성별투입해야 할 것이다. 이런 관점에서 최 근의 자동차기술 개발동향을 개관하고 1980년대 후반의 개발동향을 전망해 보고자 한다. 자동차 제품기술은, 첫재 석유와 원재로, 부품, 노동력의 가격상승과 둘재 환경, 안전도, 연비면의 규제 강화, 셋째 사용자의 편이 안락한 문전의 추구라고 하는 세가지 주요인의 이호연관에 의해 그 개발방향이 결정된다고 할 수 있다. 현재, 미,일 자동차업체는, 가솔린 및 디젤 왕복내연기관 의 기존 동력원과 FF, FR 및 4WD의 기존구동방식을 유지하면서, 엔진 등 주요기능부품의 최적 제어와 운전자의 편이성향상 및 운전정보 제공을 위한 전자기술의 적용, 경량재질 및 세라믹스 등의 신소재 적용, 실용화, 그리고 유가상승에 대비한 대체연료의 개발연구를 주개발과제로 삼고 있으며, 이 주세는 80년대 후반까지 지속될 것으로 보여진다.