• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.108-108
• /
• 2022

기후변화는 전 지구 수문순환과 수자원 분포에 커다란 영향을 준다. 하지만 지금까지 관측되어온 지구상의 건조도 변화에 있어서 기후의 자연변동성의 영향과 인간활동에 의한 온난화의 영향을 명시적으로 밝힌 연구는 존재하지 않는다. 본 연구에서는 데이터 구동형 모델과 물리 모델을 이용해 관측 기반의 전구 수자원 분포를 1902년부터 2014년까지 재구축함으로써 지구의 평균온도가 약 1도 상승해온 지난 세기에 걸쳐 건기의 수자원 분포가 어떻게 변해왔는지 보인다. 재구축된 전구 변화 패턴은 인간활동에 의한 온실가스 증가등을 고려한 기후 모델 시뮬레이션과 흡사함을 알 수 있었으며 기후의 자연변동성만을 고려한 기후 모델 시뮬레이션에서는 발견되지 않았다. 주로 북아시아, 북미, 유럽 등 중위도 온대지방에서 더욱더 건조한 건기가 뚜렷하게 나타났으며 이는 강수량의 감소보다는 증발산의 증가에 기인하는 것으로 나타난다. 이와 같은 건조도의 변화는 미래 있어서 또한 인류에 대한 커다란 위협으로 자리한다. 미래 기후에서의 가뭄의 변화에 대해 다양한 연구들이 존재하지만 대부분 높은 수준의 온난화 (예를들어 RCP-SSP 585)에서의 영향에 국한된다. 다시 말해 인류가 21세기 중반에 달성을 목표로 하는 탄소중립이 가뭄의 측면에서 어떤 영향을 주게 될지에 대한 연구는 아직 충분하지 않다고 할 수 있다. 본 연구에서는 약한 혹은 중간 수준의 기후변화 시나리오를 이용해 파리협약에서 목표로 하는 1.5℃와 2℃ 상승에 따라 전 지구의 건조도 분포가 어떻게 변하고 그 변화에 있어서 어떠한 수문기후학적 메커니즘이 작용하는지 밝힌다. 지중해 연안 지역에서는 건조도의 가속이 +1.5℃와 +2℃사이에 존재하였으나 동아시아에서는 +1.5℃와 +2℃ 모두에서 습윤해짐을 알 수 있었으며 이러한 지역적 불균일성은 기후변화 대응 노력에 있어서 과거 온실가스 배출에 대한 책임뿐만 아니라 다양한 부문에 걸친 미래의 잠재 적응 노력 또한 고려해야만 함을 시사한다. 본 연구는 제6차 Coupled Model Intercomparison Project의 Land Surface, Snow, Soil-moisture Model Intercomparison Project (CMIP6/LS3MIP)와 Half a degree Additional warming, Prognosis and Projected Impacts (HAPPI)의 다중 모델 앙상블 시뮬레이션 결과를 이용했다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.459-461
• /
• 2022

One of the big differences between Network-on-Chip (NoC) and the existing parallel processing system based on an off-chip network is that data packet routing is performed using a centralized control scheme. In such an environment, the best-effort packet routing problem becomes a real-time assignment problem in which data packet arriving time and processing time is the cost. In this paper, the Hungarian algorithm, a representative computational complexity reduction algorithm for the linear algebraic equation of the allocation problem, is implemented in the form of a hardware accelerator. As a result of logic synthesis using the TSMC 0.18um standard cell library, the area of the circuit designed through case analysis for the cost distribution is reduced by about 16% and the propagation delay of it is reduced by about 52%, compared to the circuit implementing the original operation sequence of the Hungarian algorithm.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.5
• /
• pp.39-46
• /
• 2024

In this paper, we propose a low-cost wearable device that can monitor the health status of the elderly living alone in real-time. As aging is accelerating, the elderly population is rapidly increasing, and the social isolation of the elderly living alone is causing physical and mental difficulties and the number of elderly people dying alone is increasing, becoming a social problem. In this study, we propose a belly band-type wearable device that can monitor the biometric information of elderly living alone. The proposed device transmits electromyogram, electrocardiogram, and body temperature information to a remote server through an Arduino-based sensor built into the abdominal band. Transmitted information can be monitored in a web environment in real-time, and it has the feature of enabling remote monitoring of a large number of subjects with a small amount of management manpower. The research results will contribute to improving the safety and welfare of seniors living alone by not only detecting lonely deaths in advance but also responding immediately to dangerous situations that may occur in daily life.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.407-410
• /
• 2018

As the operating frequency of an electromagnetic wave increases, the maximum output and wavelength of the wave decreases, so that the size of the circuit cannot be reduced. As a result, the fabrication of a circuit with high power (of the order of or greater than kW range) and terahertz wave frequency band is limited, due to the problem of circuit size, to the order of ${\mu}m$ to mm. In order to overcome these limitations, we propose a source design technique for 0.1 THz~0.3 GW level with cylindrical shape (diameter ~2.4 cm). Modeling and computational simulations were performed to optimize the design of the high-power electromagnetic sources based on Cherenkov radiation generation technology using the principle of plasma wakefield acceleration with ponderomotive force and artificial dielectrics. An effective design guideline has been proposed to facilitate the fabrication of high-power terahertz wave vacuum devices of large diameter that are less restricted in circuit size through objective verification.

• Journal of radiological science and technology
• /
• v.33 no.1
• /
• pp.61-66
• /
• 2010

In this paper we evaluated small field dose characteristics of exclusive cone fields versus square fields for stereotactic radiosugery (SRS) which is based on linear accelerators (LINAC). For this test, we used a small beam detector (stereotactic fields detector : SFD) with a 6 MV photon beam and a water phantom system (IBA, Germany). Percentage depth dose (PDD) was measured for different field sets (cones : ${\Phi}1\;cm$, ${\Phi}2\;cm$, ${\Phi}3\;cm$ ; square fields : $1{\times}1\;cm^2$, $2{\times}2\;cm^2$, $3{\times}3\;cm^2$) at a source skin distance (SSD) of 100 cm. We measured the point depths at 1.5 cm, 5 cm, 10 cm, 20 cm, and 30 cm. The output factors were measured under the same geometrical conditions of the PDD and normalized at the maximum dose depth. To analyze the penumbra, we measured the dose profile with 95 cm of SSD, 5 cm of depth for each field sizes (${\Phi}1\;cm$, ${\Phi}3\;cm$, $1{\times}1\;cm^2$, and $3{\times}3\;cm^2$) using SFD. We obtained the values for every 1 mm interval in the physical field (90%) and 0.5 mm interval in the penumbra region (20 to 80%). The PDD variation of exclusive cones and square fields were 4.3 to 7.9% lesser than the standard field size ($10{\times}10\;cm^2$. The variation of PDD was reduced while the field size was increased. To compare the beam quality, we analyzed the $PDD_{20,10}$ and the results showed under the 1% of variations for all experiments except for ${\Phi}1\;cm$ cone and $1{\times}1\;cm^2$ fields. Output factors of exclusive cone were increased 3.1~4.6% than the square fields, and the penumbra region of exclusive cone was reduced 20% as compared to the square fields. As the previous researches report, it is very important for SRS and SFD that precise dosimetry in small beam fields. In this paper, we showed the effectiveness of exclusive cone, compared to square field. And we will study on the various detector characteristics for small beam fields.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.315-322
• /
• 2013

The aim of this work is to verify the self-quality assurances in medical institutions in Korea through the external audits by the group of experts and have a mutual discussion of the systematic problems. In order to validate the external audits 30 of 80 medical institutions across the nation were picked out considering the regional distribution and the final 25 institutions applied voluntarily to take part in this work. The basic rules were setup that any information of the participants be kept secrete and the measurements be performed with the dosimetry system already verified through intercomparision. The outputs for 2 or more photon beams, the accuracy of gantry rotation and collimator rotation and the poistional accuracy of MLC movement were measured. The findings for the output measurement showed the differences of -0.8%~4.5%, -0.79%~3.01%, and -0.7%~0.07% with respect to that of the verified dosimetry system for the 6MV, 10MV, and 15MV, respectively. For the reference absorbed dose 8 (16%) of 50 photon beams in 25 medical institutions differed 2.0% or greater from the reference value. The coincidences of Field size with x-ray beam and radiation isocenters of Gantry roration and collimator rotation gave the results of within ${\pm}2$ mm for every institute except 2 institutions. The positional accuracy of MLC movement agreed to within ${\pm}1$ mm for every institute. For the beam qualities of 6 MV photon beams kQ values showed the distribution within 0.4% between maximum and minimum. For the protocols 21 institutions (84%) used absorbed dose to water based protocol while 4 insitutions (16%) used air kerma based one. 22 institutions employed the SSD technique while 3 institutions did the SAD one. External audit plays an important role in discovering the systematic problems of self-performing Quality Assurances and having in depth discussion for mutual complementation. Training experts of international level as well as national support system are required so that both the group of experts of medical physicists and government laboratory could perform together periodical and constant external audits.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.26-35
• /
• 2017

Since the Northridge earthquake (1994) and Kobe earthquake (1995), the concept of performance-based design has been actively introduced to design major structures and buildings. Recently, the seismic design code was established for fire protection facilities. Therefore, the important fire protection facilities should be designed and constructed according to the seismic design code. Accordingly, uniform hazard spectra (UHS), with annual exceedance probabilities, corresponding to the performance level, such as operational, immediate occupancy, life safety, and collapse prevention, are required for performance-based design. Using the method of probabilistic seismic hazard analysis (PSHA), the uniform hazard spectra for 5 major cities in Korea with a recurrence period of 500, 1,000, and 2,500 years corresponding to frequencies of (0.5, 1.0, 2.0, 5.0, 10.0)Hz and PGA, were analyzed. The expert panel was comprised of 10 members in seismology and tectonics. The ground motion prediction equations and several seismo tectonic models suggested by 10 expert panel members in seismology and tectonics were used as the input data for uniform hazard spectrum analysis. According to sensitivity analysis, the parameter of spectral ground motion prediction equations has a greater impact on the seismic hazard than seismotectonic models. The resulting uniform hazard spectra showed maximum values of the seismic hazard at a frequency of 10Hz and also showed the shape characteristics, which are similar to previous studies and related technical guides for nuclear facilities.

• Journal of the Korea Computer Graphics Society
• /
• v.24 no.3
• /
• pp.73-81
• /
• 2018

In this paper, we present a motion-driven rowing simulation framework that allows multiple players to row a boat together by their harmonized movements. In the actual rowing game, it is crucial for the players to synchronize their rowing with respect to time and pose so as to accelerate the boat. Inspired by this interesting feature, we measure the motion similarity among multiple players in real time while they are doing rowing motions and use it to control the velocity of the boat in a virtual environment. We also employ game components such as catching an item which can accelerate or decelerate the boat depending on its type for a moment once it has been obtained by synchronized catching behaviors of the players. By these components, the players can be encouraged to more actively participate in the training for a good teamwork to produce harmonized rowing movements Our methods for the motion recognition for rowing and item catch require the tracking data only for the head and the both hands and are fast enough to facilitate the real-time performance. In order to enhance immersiveness of the virtual environment, we project the rowing simulation result on a wide curved screen.

• Progress in Medical Physics
• /
• v.8 no.1
• /
• pp.17-24
• /
• 1997

We developed PC-based planning system for linear accelerator based stereotactic radiosurgery. The system was developed under Windows 95 on Pentium Pro$\^$(R) 200 ㎒ IBM PC with 128 MB RAM. It was programed using IDL$\^$(R)/ of Research Systems, Inc. as a programing tool. CT image data obtained with BRW stereotactic frame is transferred to PC through magnetoptical disk. As loading the image, the system automatically recognizes the location of rods and establishes stereotactic coordinates. It accurately calculates and corrects the coordinates, degree of tilting, and magnification rate of axial images. After the coordinates is defined we can delineate and edit the contours of target and organs of interest on axial images. Upon delineating contours of target, isocenter is determined automatically and we can set up the beam configuration for radiosurgery. The system provides beam's eye view and room's eye view for efficient confuguring of beams. The system calculates dose distribution 3-dimensionally. It takes 1 to 2 minutes to calculate dose distribution for 5 arcs. We can verify the dose distribution on serial axial images. We can analyze the dose distribution quantitatively by evaluation of dose-volume histogram of target and organ of interest. This system, PC-based radiosurgery planning system, includes the basic features for radiosurgery planning and calculates dose distribution within reasonable time for clinical application.

• Korean Journal of Remote Sensing
• /
• v.31 no.3
• /
• pp.215-226
• /
• 2015

Normally, aero photography using UAV uses about 430 MHz bandwidth radio frequency (RF) modem and navigates and remotely controls through the connection between UAV and ground control system. When using the exhausting method, it has communication range of 1-2 km with frequent cross line and since wireless communication sends information using radio wave as a carrier, it has 10 mW of signal strength limitation which gave restraints on life my distance communication. The purpose of research is to use communication technologies such as long-term evolution (LTE) of smart camera, Bluetooth, Wi-Fi and other communication modules and cameras that can transfer data to design and develop automatic shooting system that acquires images to UAV at the necessary locations. We conclude that the android based UAV filming and communication module system can not only film images with just one smart camera but also connects UAV system and ground control system together and also able to obtain real-time 3D location information and 3D position information using UAV system, GPS, a gyroscope, an accelerometer, and magnetic measuring sensor which will allow us to use real-time position of the UAV and correction work through aerial triangulation.