• Korean Journal of Materials Research
• /
• v.10 no.6
• /
• pp.385-391
• /
• 2000

A kinetic study on the preparation of iron powder by hydrogen reduction of ferrous chloride vapor has been carried out both experimentally and theoretically. For the preparation of iron powder, ferrous chloride was vaporized and transported to a reaction zone by Ar gas used as carrier. Ferrous chloride vapor and hydrogen were mixed and subject to a reduction reaction at high temperature to produce iron powder and HCI gas. Iron powder was collected with organic solvent at the end of reaction zone and HCI gas was also absorbed in a caustic soda solution to determine the conversion ratio of ferrous chloride. For the development of rate equations, a 1st-order reaction and equilibration of ferrous chloride vapor with Ar gas were assumed. According to the results, the rate constant, k could be expressed as $k=7,879exp(-53,840/RT)\textrm{dm}^3/mole.sec$ and the activation energy was found to be 53.84kJ/mole. From TEM observation, the particle size distribution of iron powder produced was found to be in the range of $0.1~1.0{\mu\textrm{m}}$ which was not significantly influenced by reaction temperature or gas flow rates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.05a
• /
• pp.11-11
• /
• 2009

종래의 산업폐수 처리기술로는 중금속 함유 폐수에 수용성의 금속염을 첨가하여 가성소다 혹은 소석회를 이용하여 pH를 조정하고 고분자 응집제를 첨가하여 금속의 수산화물을 생성시켜 이를 부상 혹은 침전시켜 Sludge화하여 제거하는 방법이 주로 사용되고 있다. 그 외 질소, 인, 유기물이 함유된 폐수의 경우에는 Biological Oxidation Techniques, 활성탄 흡착방식이 주로 채택되고 있다.[1-3] 이러한 폐수처리기술은 화학약품 사용량이 과다하고 이는 Sludge 생성량을 증대하고 2차 폐수처리가 필요로 하는 경우가 많고, 처리장이 면적이 넓어야 하고 대용량의 Sludge 제거창치가 필요하여 고비용의 처리공정으로 문제점을 가지고 있다.[2-3] 이에 본 연구에서는 이러한 기존 기술의 문제점을 보완할 수 있고 기존 기술로는 완벽하게 처리하기 곤란한 악성 폐수들에 대한 새로운 고도처리기술로 초전도 마그네트를 이용한 고구배 자기분리기술에 대한 기초연구를 하였다. 본 연구에서 사용한 고구배 자기분리 시스템은 무헬륨 전도냉각방식으로 자기분리를 위해 사용한 필터는 SUS 430 재질의 메쉬 형태로 제작하여 실험하였다. 또한, 자기분리 처리를 위한 전처리 공정으로는 응집제를 첨가하여 자기분리 효율을 높이고자 하였다. 자기분리 처리대상수로는 포항제철에 압연 강판에 사용되는 냉각수를 대상으로 자기분리 처리에 대한 효과를 실험하였다. 또한, 자기분리에 대한 특성을 평가하기 위해 강자성의 $Fe_3O_4$ 미세자성분말을 첨가하여 처리수내의 들어있는 유기물질에 대해 자기분리 자장 및 유속에 대한 처리효율을 미치는 영향을 조사하였다. 자기분리 처리는 1~6 Tesla에서 자기필터는 디스크 형태로 다층으로 연속적으로 적층하였으며, 처리유속은 1~4 l/min으로 하였다. 고농도인 처리폐수를 자가분리 인가 자장에 따라 처리하여 고농도에서는 70%, 저농도에서는 98 %까지 처리되었다. 또한, 자기분리용 필터는 SUS 430 재질의 mesh 망을 사용하였으며 인가자장 및 유속변화에 대한 실험 결과 탁도 및 농도는 필터 크기의 영향은 거의 차이가 없었으며 단지 인가자장 및 유속에 따라서 지수적으로 감소하였다. 자기분리된 용액 내 $Fe_3O_4$ 입도 분석 결과 자기분리 이전에 분포하던 $10\sim20\;{\mu}m$의 입자는 거의 제거되었으며 2 ${\mu}m$ 이하의 입자들은 실험 횟수에 따라 점점 직경이 작은 쪽으로 분포가 좁아졌으며, 마그네타이트의 자화율을 분석한 결과 약 0.8 Tesla에서 포화 되었으며 처리수의 탁도 및 농도가 자장에 따라 감소하는 것으 알 수 있었다.

• Korean Journal of Plant Resources
• /
• v.18 no.2
• /
• pp.216-222
• /
• 2005

This study was carried out to investigate the utilization of pruned branch of a peach tree as natural dyeing material. The dyestuff was extracted from pruned branch of a peach tree. we examined the dyeing ability on silk and cotten fabrics. The surface color of silk fabrics differed depending on mordants. E values in treatments of mordants ranged from 11.63 to 30.86 as compared to non-treatment. Dyeing properties of cotten fabrics were improved with a treatment of sulfate of iron as compared with of non-treatment. The values a increased when the slaked lime and sodium hydroxide were used as mordants, while the values b increased when copper sulfate, alum and apple vinegar were used. We investigated the surface colors of silk and cotten fabrics after washing three times. In general, the surface colors of silk and cotten fabrics between the treatments of all mordants and non-treatment were diminished by the washing. We also investigated the surface colors of silk and cotten fabrics when those were washed and treated by the light after soaking those into various pH solutions. The surface colors of silk and cotten fabrics were considerably preserved by the washing, the light and pH concentration. In conclusion, our results suggest that the dyestuffs from pruning branch of a peach tree would be useful as a natural dyeing material using the optimized conditions for silk and cotten dyeing.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.71-77
• /
• 2005

This study was carried out to investigate the utilization of pruned branch of a peach tree as natural dyeing material. The dyestuff was extracted from pruned branch of a peach tree. we examined the dyeing ability on silk and cotton fabrics. The surface color of silk fabrics differed depending on mordants. E values in treatments of mordants ranged from 11.63 to 30.86 as compared to non-treatment. Dyeing properties of cotton fabrics were improved with a treatment of sulfate of iron as compared with of non-treatment. The values a increased when the slaked lime and sodium hydroxide were used as mordants, while the values b increased when copper sulfate, alum and apple vinegar were used. We investigated the surface colors of silk and cotton fabrics after washing three times. In general, the surface colors of silk and cotton fabrics between the treatments of all mordants and non-treatment were diminished by the washing. We also investigated the surface colors of silk and cotton fabrics when those were washed and treated by the light after soaking those into various pH solutions. The surface colors of silk and cotton fabrics were considerably preserved by the washing, the light and pH concentration. In conclusion, our results suggest that the dyestuffs from pruning branch of a peach tree would be useful as a natural dyeing material using the optimized conditions for silk and cotton dyeing.

• Journal of Korean Society of Forest Science
• /
• v.43 no.1
• /
• pp.14-19
• /
• 1979

On treatment with sodium hydroxide at $165^{\circ}$ for 1.5~3hr followed by air oxidation. vanillyl alcohol afforded colored materials. $^{13}C$-NMR spectrum of the material did not show any absorptions assigned to the carbons of chromophoric structures, but gave the valuable information on the chemical structures of the condensation products. On the other hand, the colored material specifically labelled by $^{13}C$ at the benzylic position was prepared by alkali treatment of vanillyl alcohol-[carbinol-$^{13}C$] followed by air oxidation, and $^{13}C$-NMR spectra of the material exhibited absorptions at 101.7 and 104.6 ppm due to the carbons of a quinonemethide structure, indicating that the quinomethide unit would be one of the important types of chromophores in which benzylic carbon of vanillyl alcohol was included.

• Korean Journal of Soil Science and Fertilizer
• /
• v.12 no.2
• /
• pp.91-97
• /
• 1979

1. Nitrogenous compounds of-organic materials as nitrogen sources for Korean ginseng were characterized according to their solubility and chemical forms. 2. The extractable fractionation was as follows : Yakto group : non-extractable N > acid hydrolyzable N > acid nonhydrolyzable N > water sol. N, Litter group : acid hydrolyzable N > non-extractable N > water sol. N > acid non-hydrolyzable N, Bone meal : acid hydrolyzable N > water sol. N > acid non-hydrolyzable N. 3. Nitrogenous compounds in the water sol. fraction were : Yakto group and Litter group : humus N > amino acid N > nitrate N (recognized only in Yakto group) > ammonia N > hexosamine N > amide N, Bone meal : amino acid N > humus N > ammonia N > amide N. And nitrogenous compounds in the acid hydrolyzable fraction were : amino acid N > humus N ${\simeq}$ ammonia N > hexosamine N. 4. Availability was discussed about the major nitrogenous compounds (amino acid, humus and inorganic N) and the solubility.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1963-1970
• /
• 2008

Natural indigo dye in powder form was prepared by modifying traditional Niram method, using $Ca(OH)_2$ instead of baked oyster powder for precipitating indigo dye. The prepared dye was applied to dyeing Tencel fabrics to investigate the effect of experimental conditions for the optimization of dyeing process. The indigo dye powder contained 15.2%(w/w) of indigo content and 0.757%(w/w) of indirubin content on the basis of HPLC analysis. Maximum dye uptake was obtained at $60^{\circ}C$ for 20min. Almost saturated dye uptake was obtained at 2g/L of sodium hydrosulfite concentration up to 4g/L of indigo dye and then slowly increased for further increase of sodium hydrosulfite. Whereas at higher indigo dye concentration(8g/L) more than 3g/L of reducing agent concentration was required for obtaining the maximum dye uptake. At the same indigo dye and reducing agent concentration, K/S value of the sample dyed without sodium hydroxide(pH 5.75) was 15.19, much higher than one dyed in alkaline condition(K/S 5.76). There was no difference in colorfastness ratings among samples with different color strength. However, more fading was occurred for the sample with low color strength.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.485-490
• /
• 2004

Crude corn oil (CCO) was obtained through the expression-extraction process from corn germ. The CCOs of final process at $90^{\circ}C,\;70^{\circ}C\;and\;50^{\circ}C$ were stored in outdoor storage tanks. From the samples, refined CCO (RCCO) were prepared with $0\%,\;10\%\;and\;20\%$ excessive of phosphoric acid, caustic solution and acidic clay were used in degumming-alkali refining-bleaching process. RCCOs were stored at room temperature in dark places. The color change was not effected by the amount of phosphoric acid, caustic solution and acidic clay, but temperature of process affects the color change. Finally, the prevention for color reversion of RCCO could be obtained by lowering the temperature of final process and optimal temperature of RCCO in summer was found about less than $50^{\circ}C$.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.2
• /
• pp.111-118
• /
• 2014

The electrochemical properties using the cells assembled with the synthesized $LiCoO_2$(LCO) were evaluated in this study. The LCO was synthesized from high-purity cobalt sulfate($CoSO_4$) which is recovered from the cathode scrap in the wastes lithium ion secondary battery(LIB). The leaching process for dissolving the metallic elements from the LCO scrap was controlled by the quantities of the sulfuric acid and hydrogen peroxide. The metal precipitation to remove the impurities was controlled by the pH value using the caustic soda. And also, D2EHPA and $CYANEX^{(R)}272$ were used in the solvent extraction process in order to remove the impurities again. The high-purity $CoSO_4$ solution was recovered by the processes mentioned above. We made the 6 wt.% $CoSO_4$ solution mixed with distilled water. And the 6 wt.% $CoSO_4$ solution was mixed with oxalic acid by the stirring method and dried in oven. $LiCoO_2$ as a cathode material for LIB was formed by the calcination after the drying and synthesis with the $Li_2CO_3$ powder. We assembled the cells using the $LiCoO_2$ powders and evaluated the electrochemical properties. And then, we confirmed possibility of the recyclability about the cathode materials for LIBs.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.30-38
• /
• 2008

Petroleum-based resin adhesives have extensively been used for the production of wood panels. However, with the increase of manufacturing cost and the environmental issue, such as the emission of volatile organic compounds, of the adhesive resins, it is necessary to be developed new adhesive systems. In this study, the potential of okara, which is a residue wasted from the production of tofu, for the development of bio-based adhesives was investigated. At first, the physical and chemical properties of okara were examined. After okara was hydrolyzed in acidic and/or alkaline solutions, okara-based adhesive resins were formulated with the mixtures of the okara hydrolyzates and phenol formaldehyde (PF) prepolymer. The adhesive resins were used for the fabrication of plywood panels, and then the adhesive strength and formaldehyde emission of the plywood panels were measured to examine the applicability of the resin adhesives for the production of plywood panels. The solids content and pH of the okara used in this study were around 20% and weak acidic state, respectively. In the analysis of its chemical composition, the content of carbohydrate was the highest, and followed by protein. The shear strengths of plywood fabricated with okara-based resin adhesives exceeded a minimum requirement of KS standard for ordinary plywood, but its wood failure did not reach the minimum requirement. In addition, the formaldehyde emissions of all plywood panels were higher than that of E1 specified in the KS standard. Based on these results, okara has the potential to be used as a raw material of environmentally friendly adhesive resin systems for the production of wood panels, but further researches - biological hydrolysis of okara and various formulations of PF prepolymer - are required to improve the adhesive strength and formaldehyde emission of okara-based resin adhesives.