• Progress in Medical Physics
• /
• v.15 no.1
• /
• pp.30-38
• /
• 2004

Purpose: To develop a whole body frame for the purpose of reducing patient motion and minimizing setup error for extra-cranial stereotactic radiotherapy, and to evaluate the repositioning setup error of a patient in the frame. Materials and Methods: The developed whole body frame is composed of a base plate, immobilizer, vacuum cushion, ruler and belts. The dimension of the base plate is 130 cm in length, 50 cm in width and 1 cm in thickness. The material used in the base plate of the frame was bakelite and the immobilizer was made of acetal. In addition, Radiopaque angio-catheter wires were engraved on the base plate for a coordinate system to determine the target localization. The measurement for radiation transmission and target localization is peformed in order to test the utilization of the frame. Also, a Matlab program analyzed the patients setup error by using the patient's setup images obtained from a CCTV camera and digital record recorder (DVR). Results: A frame that is useful for CT simulation and radiation treatment was fabricated. The frame structure was designed to minimize collisions from the changes in the rotation angle of the gantry and to maximize the transmission rate of the Incident radiation at the lateral or posterior oblique direction. The lightening belts may be used for the further reduction of the patient motion, and the belts can be adjusted so that they are not in the way of beam direction. The radiation transmission rates of this frame were measured as 95% and 96% at 10 and 21 MV, respectively. The position of a test target on the skin of a volunteer is accurately determined by CT simulation using the coordinate system in the frame. The estimated setup errors by Matlab program are shown 3.69$\pm$1.60, 2.14$\pm$0.78 mm at the lateral and central chest, and 7.11 $\pm$2.10, 6.54$\pm$2.22 mm at lateral and central abdomen, respectively. The setup error due to the lateral motion of breast is shown as 6.33$\pm$ 1.55 mm. Conclusion: The development and test of a whole body frame has proven very useful and practical in the radiosurgery for extra-cranial cancers. It may be used in determining target localization, and it can be used as a patient immobilization tool. More experimental data should be obtained in order to improve and confirm the results of the patient setup error.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.201-207
• /
• 2015

The new function of 3DVH software for dose calculation inside the patient undergoing TomoTherapy treatment by applying the measured data obtained by ArcCHECK was recently released. In this study, the dosimetric accuracy of 3DVH for the TomoTherapy DQA process was evaluated by the comparison of measured dose distribution with the dose calculated using 3DVH. The 2D diode detector array MapCHECK phantom was used for the TomoTherapy planning of virtual patient and for the measurement of the compared dose. The average pass rate of gamma evaluation between the measured dose in the MapCHECK phantom and the recalculated dose in 3DVH was $92.6{\pm}3.5%$, and the error was greater than the average pass rate, $99.0{\pm}1.2%$, in the gamma evaluation results with the dose calculated in TomoTherapy planning system. The error was also greater than that in the gamma evaluation results in the RapidArc analysis, which showed the average pass rate of $99.3{\pm}0.9%$. The evaluated accuracy of 3DVH software for TomoTherapy DQA process in this study seemed to have some uncertainty for the clinical use. It is recommended to perform a proper analysis before using the 3DVH software for dose recalculation of the patient in the TomoTherapy DQA process considering the initial application stage in clinical use.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.193-200
• /
• 2015

The aim of this study is to present commissioning results of the ViewRay system. We verified safety functions of the ViewRay system. For imaging system, we acquired signal to noise ratio (SNR) and image uniformity. In addition, we checked spatial integrity of the image. Couch movement accuracy and coincidence of isocenters (radiation therapy system, imaging system and virtual isocneter) was verified. Accuracy of MLC positioing was checked. We performed reference dosimetry according to American Association of Physicists in Medicine (AAPM) Task Group 51 (TG-51) in water phantom for head 1 and 3. The deviations between measurements and calculation of percent depth dose (PDD) and output factor were evaluated. Finally, we performed gamma evaluations with a total of 8 IMRT plans as an end-to-end (E2E) test of the system. Every safety system of ViewRay operated properly. The values of SNR and Uniformity met the tolerance level. Every point within 10 cm and 17.5 cm radii about the isocenter showed deviations less than 1 mm and 2 mm, respectively. The average couch movement errors in transverse (x), longitudinal (y) and vertical (z) directions were 0.2 mm, 0.1 mm and 0.2 mm, respectively. The deviations between radiation isocenter and virtual isocenter in x, y and z directions were 0 mm, 0 mm and 0.3 mm, respectively. Those between virtual isocenter and imaging isocenter were 0.6 mm, 0.5 mm and 0.2 mm, respectively. The average MLC positioning errors were less than 0.6 mm. The deviations of output, PDDs between mesured vs. BJR supplement 25, PDDs between measured and calculated and output factors of each head were less than 0.5%, 1%, 1% and 2%, respectively. For E2E test, average gamma passing rate with 3%/3 mm criterion was $99.9%{\pm}0.1%$.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.2
• /
• pp.153-169
• /
• 2020

A new way of shopping based on virtual assistant, so called voice shopping, is drawing attention. The voice shopping market is growing around the world, and Korea is on the verge of full-scale commercialization of this new shopping. For the development of voice shopping-related industries, it is necessary to research on specific issues related to this new shopping methods, such as the quality of services, efficient processes tailored to new ways, and ways to build customer relationships. As part of such an attempt, the study seeks to determine the factors that affect consumers' perception and attitudes toward voice shopping. The study conducted the analysis based on survey response data of 171 online shopping users. In addition to the typical factors of the technology acceptability model(TAM) such as perceived usefulness and ease of use, the impact of perceived playfulness was included for analyzing the intention on the acceptance of voice shopping. In particular, this study focuses on the impact of user attributes. For the spread of voice shopping, it is necessary to set up a valid target customer and understand users for establishing an effective customer relationship. Therefore, this study tries to analyze how the perceptions on the voice shopping(perceived usefulness, ease of use, and perceived playfulness) are affected by users' attributes, such as user innovativeness and user knowledge level. The result of analysis shows that user innovativeness have a positive relationship with all of perceived usefulness, ease of use, and perceived playfulness. The user knowledge base, however, was not significant to all these three variables. The user knowledge base is shown to have a positive effect on user innovativeness which is the source of positively significant factor for the variable of the perceptions on the voice shopping. Meanwhile, among the variables of extended technology acceptance model, perceived usefulness and perceived playfulness have positive effects on the acceptance of voice shopping, while ease of use has no significant impact on the voice shopping acceptance. Ease of use has a positive relationship with perceived usefulness and playfulness. This study is meaningful in providing implications on the development of voice shopping platforms and related services, and establishment of customer relationship.

• Management & Information Systems Review
• /
• v.31 no.2
• /
• pp.41-59
• /
• 2012

ERP is a new technique of process innovation. It indicates enterprise resource planning whose purpose is an integrated total management of enterprise resources. ERP can be also seen as one of the latest management systems that organically connects by using computers all business processes including marketing, production and delivery and control those processes on a real-time basis. Currently, however, it's not easy for local enterprises to have operators who will be in charge of ERP programs, even if they want to introduce the resource management system. This suggests that it's urgently needed to train such operators through ERP education at school. But in the field of education, actually, the lack of professional ERP instructors and less effective learning programs for industrial applications of ERP are obstacles to bringing up ERP workers who are competent as much as required by enterprises. In ERP, accounting is more important than any others. Accountants are assuming more and more roles in ERP. Thus, there's a rapidly increasing demand for experts in ERP accounting. This study examined previous researches and literature concerning ERP education, identified problems with current ERP education at college and proposed how to solve the problems. This study proposed the ways of improving ERP education at college as follows. First, a prerequisite learning of ERP, that is, educating the principle of accounting should be intensified to make students get a basic theoretical knowledge of ERP enough. Second, lots of different scenarios designed to try ERP programs in business should be created. In association, students should be educated to get a better understanding of incidents or events taken place in those scenarios and apply it to trying ERP for themselves. Third, as mentioned earlier, ERP is a system that integrates all enterprise resources such as marketing, procurement, personnel management, remuneration and production under the framework of accounting. It should be noted that under ERP, business activities are organically connected with accounting modules. More importantly, those modules should be recognized not individually, but as parts comprising a whole flow of accounting. This study has a limitation because it is a literature research that heavily relied on previous studies, publications and reports. This suggests the need to compare the efficiency of ERP education between before and after applying what this study proposed to improve that education. Also, it's needed to determine students' and professors' perceived effectiveness of current ERP education and compare and analyze the difference in that perception between the two groups.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.6
• /
• pp.894-902
• /
• 2016

The purpose of this study was to analyze the attributes considered as important by parents in the selection of laver for infants through conjoint analysis techniques. A total of 917 questionnaires were distributed in January 2016, of which 211 were completed (23.0%). Statistical data analyses were performed using SPSS/Win 21.0 for descriptive statistics and conjoint analysis. The conjoint design was applied to evaluate the hypothetical laver for infants. According to the analysis of attributes and levels of laver for infants, the relative importance of each attribute was follows: seasoning (26.55%), flavor (19.33%), texture (18.75%), oil (15.15%), size (10.61%), and certification (9.61%). The results of the conjoint analysis indicate that parents raising infants preferred laver with the characteristics of non-seasoning, general flavor, softness, half-size, organic certification, and perilla oil. The most preferred laver for infants gained a 53.7% potential market share from choice simulation compared with laver being sold. Using utility and relative importance, the laver market for infants was classified into two segments. As a result of market segmentation, parents of cluster 1 preferred the laver model being sold (soy seasoning) while parents of cluster 2 preferred the optimized laver model (non-seasoning).

• Journal of Oral Medicine and Pain
• /
• v.36 no.1
• /
• pp.1-10
• /
• 2011

The aims of this study were to establish the effect of gender and age on number of fungiform papillae and electrogustometric thresholds of the tongue, and to determine the relation between number of fungiform papillae and electrogustometric threshold. Sixty-two healthy subjects of 20 to 39 years old were enrolled in this study. Examination areas were defined as center, anterior, left lateral, right lateral, and posterior on the dorsal surface of the tongue, which was stained with methylene blue dye and photographed with a scale bar on it. The number of fungiform papillae within $1\; cm^2$ square area of each examination site was counted twice. The counted values were averaged to produce means. Taste thresholds were measured three times on each examination area using an electrogustometer. Means of the threshold values were calculated. 1. The number of fungiform papillae was the largest at the anterior examination area, followed by right lateral, left lateral, posterior and central. Women had more fungiform papillae than men at anterior, right lateral, and center areas. Subjects in twenties showed more fungiform papillae than those in thirties at anterior, right lateral, and left lateral areas. 2. Anterior area of the tongue measured the lowest electrogustometric threshold, followed by left lateral, right lateral, posterior and center. The threshold was higher in men at anterior and right lateral areas. The subjects in thirties had higher threshold only at right lateral area than those in twenties. 3. Electrogustometric threshold was inversely correlated with the number of fungiform papillae at anterior and posterior areas. The results showed that the number of fungiform papillae and taste threshold varied according to tongue locus, and they were influenced by age and gender. The results also suggested that the number of fungiform papillae was related to electrogustometric threshold inversely.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.515-522
• /
• 2007

In this study we have attempted to evaluate the technical feasibility of "BB-HY", which is depleted gas reservoir as a gas storage field, using the commercial compositional simulator "ECLIPSE 300". The "BB-HY" reservoir has an initial gas in place of 143 BCF which is relatively small, and its porosity and permeability are 19.5% and 50 md, respectively. For "BB-HY" gas reservoir, we have performed a feasibility analysis by investigating the cushion gas (or working gas), converting time to gas storage field, operation cycle, number of wells and the possible application of horizontal borehole as well. From the simulation results, it was found that the amount of cushion gas in "BB-HY" reservoir is required at least 50% of IGIP in order to operate stably as gas storage field. When one produces gas for longer time and hence the remaining gas in reservoir is less than optimal cushion gas, no technical problem was occurred as long as additional cushion gas is injected up to the optimal cushion gas. In the case of changing the operation cycle into producing gas for three months during winter season from producing five months, the result shows that either the cushion gas should be greater than 60% or the more number of wells should be drilled. Meanwhile, from the results of sensitivity analysis for the number of wells, in cases of operating six or eight vertical wells, the stable reproduction of the injected gas can not be possible in "BB-HY" gas reservoir since the remaining gas in reservoir is increased. Therefore, in "BB-HY" reservoir, at least ten vertical wells should be drilled for the stable operation of gas. This time, when three horizontal wells are additionally drilled including the existing two vertical wells, it was found that the operation of injection and reproduction of gas is relatively stable in "BB-HY" gas reservoir.

• Journal of radiological science and technology
• /
• v.34 no.1
• /
• pp.51-58
• /
• 2011

The aim of the study is to analyze the dose delivery error depending on the depth variation according to target positions and arc trajectories by comparing the simulated treatment planning with the actual dose delivery in conformal arc therapy. We simulated the conformal arc treatment planning with the three target positions (center, 2.5 cm, and 5 cm in the phantom). For the experiments, IMRT body phantom (I’mRT Phantom, Wellhofer Dosimetry, Germany) was used for treatment planning with CT (Computed Tomography, Light speed 16, GE, USA). The simulated treatment plans were established by three different target positions using treatment planning system (Eclipse, ver. 6.5, VMS, Palo Alto, USA). The radiochromic film (Gafchromic EBT2, ISP, Wayne, USA) and dose analysis software (OmniPro-IMRT, ver. 1.4, Wellhofer Dosimetry, Germany) were used for the measurement of the planned arc delivery using 6 MV photon beam from linear accelerator (CL21EX, VMS, Palo Alto, USA). Gamma index (DD: 3%, DTA: 2 mm) histogram and dose profile were evaluated for a quantitative analysis. The dose distributions surrounded by targets were also compared with each plans and measurements by conformity index (CI), and homogeneity index (HI). The area covered by 100% isodose line was compared to the whole target area. The results for the 5 cm-shifted target plan show that 23.8%, 35.6%, and 37% for multiple conformal arc therapy (MCAT), single conformal arc therapy (SCAT), and multiple static beam therapy, respectively. In the 2.5 cm-shifted target plan, it was shown that 61%, 21.5%, and 14.2%, while in case of center-located target, 70.5%, 14.1%, and 36.3% for MCAT, SCAT, and multiple static beam therapy, respectively. The values were resulted by most superior in the MCAT, except the case of the 5 cm-shifted target. In the analysis of gamma index histogram, it was resulted of 37.1, 27.3, 29.2 in the SCAT, while 9.2, 8.4, 10.3 in the MCAT, for the target positions of center, shifted 2.5 cm and 5 cm, respectively. The fail proportions of the SCAT were 2.8 to 4 times as compared to those of the MCAT. In conclusion, dose delivery error could be occurred depending on the target positions and arc trajectories. Hence, if the target were located in the biased position, the accurate dose delivery could be performed through the optimization of depth according to arc trajectory.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.127-136
• /
• 2003

Road safety is defined under the minimum design standard and design examination process is consisted of the standard according to current road design. However, road safety in practical way is correlative to not only all element of roads but also road shape, such as, between straight line and curved line and between curved lines. Also. it is related to alignments such as horizontal alignment and vertical alignment, and cross section. That is, the practical road design should be examined in both sides of 3 dimension and consecutiveness (consistency) as the actual road is a 3 - dimensional successive object. The paper presents a concept for acceleration to evaluate consistency of road considering actual road shape on 3-dimension. Acceleration of vehicle is influential to road consistency based on running state of vehicles and state of drivers. The magnitude of acceleration. especially, is a quite influential element to drivers. Based on above, the acceleration on each point on 3-D road can be calculated and then displacement can be done. Computation of acceleration means total calculation on each axis. Speed profile refers to “Development of a safety evaluation model for highway horizontal alignment based on running speed(Jeong, Jun-Hwa, 2001)” and then acceleration can be calculated by using the speed pronto. According to literature review, definition of acceleration on 3-D and g-g-g diagram are established. For example, as a result of the evaluation, if the acceleration is out of range, the road is out of consistency. The paper shows calculation for change of acceleration on imaginary road under minimum design standard and the change tried to be applied to consistency. However accurate acceleration is not shown because the speed forecasting model is limited and the paper did not consider state of vehicles (suspension, tires and model of vehicles). If speed pronto is defined exactly, acceleration is calculated on all road shapes, such as. compound curve and clothoid curve. and then it is appled to consistency evaluation. Unfortunately, speed forecasting model on 3 -D road and on compound curves have rarely presented. Speed forecasting model and speed profile model need to be established and standard of consistency evaluation need to developed and verified by experimental vehicles.