• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.283-288
• /
• 2019

This study investigated how consumer's uncertainty avoidance affect purchase deferral intention when purchasing high-involved products (i.e. laptops) in online shopping, and we looked at whether utilitarian/hedonic consumption value has a moderating effect in this relationship. Results showed the higher the uncertainty avoidance, the higher the deferral intention. Also, only the utilitarian consumption value had moderating effect in this relationship. This means that in an information overload situation like online shopping, consumers are more likely to delay their purchase intention when they have more uncertainty avoidance. Thus, to prevent this purchase delay, marketers should selectively present relative product information, strategically emphasize the importance of certain product attribution to reduce consumers' uncertainty of the product or highlight the utilitarian values of product attributes that are expected to have a significant impact on decision making.

• Journal of Convergence for Information Technology
• /
• v.9 no.10
• /
• pp.101-107
• /
• 2019

This paper proposes a method for detecting faults in conveyor systems used for transportation of raw materials needed in the thermal power plant and cement industries. A small drone was designed in consideration of the difficulty in accessing the industrial site and the need to use it in wide industrial site. In order to apply the system to the embedded microprocessor, hardware and algorithms considering limited memory and execution time have been proposed. At this time, the failure determination method measures the peak frequency through the measurement, detects the continuity of the high frequency, and performs the failure diagnosis with the high frequency components of noise. The proposed system consists of experimental environment based on the data obtained from the actual thermal power plant, and it is confirmed that the proposed system is useful by conducting virtual environment experiments with the drone designed system. In the future, further research is needed to improve the drone's flight stability and to improve discrimination performance by using more intelligent methods of fault frequency.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.637-637
• /
• 2015

2009년 미국에서 처음으로 스마트워터그리드의 개념이 도입된 이후로 국내외 국가 기관뿐만 아니라 민간 기업에서도 스마트워터그리드에 대한 관심이 높아지고 있다. 현재 스마트워터그리드는 IBM의 진출을 시작으로 Veolia, Suez 등 다국적 물관리 기업들이 사업을 추진 중이다. 국내의 ICT기술과 수자원시스템의 융합을 통하여 용수 수요 공급량을 실시간으로 파악하고 관리하여 수자원의 지역적 시간적 격차를 해소하는 스마트워터그리드 연구가 국내에서도 진행 중이다. 물관리 시장 주도권을 확보하기 위해 글로벌 물기업간 경쟁이 심화되고 있으며, 개별플랫폼을 구축 활용하여 신규기업의 물산업 진출을 가로막고 있는 실정이다. 이러한 상황에서 국외 물산업 시장 진출을 위하여 통합플랫폼 개발 및 체계적인 데이터 구조 설계가 필요하며, 본 연구는 스마트워터그리드를 운영하기 위해 여러 곳에 분산되어 관리 운영되어지고 있는 수자원 및 물관리 데이터의 통합을 위한 체계적인 데이터베이스 구조설계에 대한 연구를 수행하였다. 이에 본 연구에서는 스마트워터그리드 도메인 내에 주력하고 있는 통합데이터베이스 구조를 외부 데이터 마이닝과 연계하여 확장하는 구조로 현실적이고 단기적인 데이터 통합효과를 위해 ETL/데이터웨어하우스방식을 적용하여 데이터 통합을 추진하였다. 지자체간 분산되어 있는 데이터베이스간의 연동은 관련 법제도 및 지자체간 협의 등 다양한 문제가 연루되어 있어 단기적으로는 B2B 데이터 연동방식을 응용하여 구성하였다. 광역 중앙 제어를 위한 통합데이터베이스는 가상DB 방식을 고려하였으며, 이는 지자체별로 구성된 통합DB에 대한 인터페이스 및 Wrapper 플랫폼을 적용하였다. 이 플랫폼간의 연동은 WaterML2.0을 적용함으로써 단기간내 구현이 가능하도록 하고 상호운용성에 문제를 해결하며, 실시간 데이터 연계를 추구하였다. 본 연구를 통해서 궁극적으로는 수자원 및 물관리 데이터의 통합을 위해 해당플랫폼에서 스키마 맵핑, 프로토콜 변환 정합 등을 실시하며, 실시간 데이터 마이닝 및 통합이 가능하도록 구성함으로써 향후 스마트워터그리드의 빅데이터 플랫폼 개발까지 확장해나갈 수 있을 것으로 기대된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.647-650
• /
• 2009

In recent years, an understanding and concern about the Photo Realistic CG increased while the CG industry grew. The overall understanding of a system, an output and algorithm, and etc. are needed in order to implement the Photo Realistic CG. Moreover, for the realistic output on CG, the texture task that it is logical the various environment condition according to the physical environment and time, and etc.s has to show. For carrying out the Photo Realistic CG texture task, the extensity of a texture, the physical properties, a material, and an environment, the various access and the logical analysis are needed. Analyzed data reaches the direct affect to the final product for expressing. The realistic ancient history site, and the cultural inheritance and industrial product will be implemented with the ground of the research of the upper part in the imaginary realistic world.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.468-468
• /
• 2017

최근 기후변화로 인해 수자원 위험요소인 가뭄 및 홍수피해가 증가하고 있으며, 인구증가에 따른 수량감소로 수자원관리가 더욱 어려워지고 있는 실정이다. 효율적인 수자원관리 및 기후변화 대응을 위해 세계 물시장은 점점 증가하고 있으며, 이에 따라 국내기업 또한 해외사업 진출을 추진하고 있으나, 사업에 필수적인 기상, 수문 등 기초자료의 부재로 어려움을 겪고 있다. 본 연구에서는 국내기업의 해외사업 진출 시 필요한 기상, 지형, 수문, 인문 사회 등 기초자료를 제공하는 글로벌 수자원정보제공시스템(Global Water Bank, GWB)을 설계 및 개발하고자 한다. 국내 외 예비타당성보고서 및 국내에서 수집 가능한 국외 정보현황을 분석하여 자료 제공인자를 도출하였으며, 이를 토대로 시스템 내 제공항목을 기상, 지형, 수문해석, 인문 사회, 기후변화 자료로 구분하였다. 해외시장 진출범위를 고려하여 자료의 공간적인 범위를 전지구로 설정하였으며, 전지구 자료의 가용성을 검토하여 제공자료를 구축하였다. 기상자료는 NCDC (National Climate Data Center)의 관측 지점자료와 APHRODITE (Asian Precipitation - Highly-Resolved Observational Data Integration Towards Evaluation) 격자자료를 수집하였으며, 오 결측 자료는 품질검토를 수행하여 보정하였다. 지형자료의 경우 USGS (U.S. Geological Survey)의 DEM, FAO (Food and Agriculture Organization of the United Nations)의 토양도, UMD (University of Maryland)의 토지피복도를 구축하였다. 수문자료는 GRDC(Global Runoff Data Centre)의 관측 지점자료를 수집하였으며, 미계측 지역의 수문자료 구축을 위해 VIC(Variable Infiltration Capacity) 수문모형을 활용하여 $0.5^{\circ}$ 공간해상도의 격자 유출량 자료를 생산하였다. 인문 사회자료로 World Bank의 국가별 통계자료를 수집하였으며, 구축된 각 자료는 GWB 시스템을 통해 제공된다. 시스템의 시범운영을 위해 아시아 지역을 대상으로 GWB- 버전을 개발하였으며, 시범지역 내 관측자료와 비교분석하여 자료의 활용성을 검증하였다. 추후 GWB 시스템은 해외진출 사업 우선지역 선정 근거로 활용될 수 있는 가상수 및 물산업지수 등의 추가정보를 제공하고 타 지역으로 확대적용 예정이다.

• Journal of the Korea Society for Simulation
• /
• v.26 no.3
• /
• pp.73-86
• /
• 2017

Environmental data plays an important role to enhance the reliability of experimental results in M&S(Modeling and Simulation). Especially in Military M&S, extreme weather events can be used for virtual training and simulation importantly. However, the environmental data is huge and it is dispersed among multiple organizations. It is difficult for M&S operators to select the date and area where the weather phenomenon occurs in the real environmental data and to acquire them. Environmental data retrieval technology based on Fuzzy criteria is one of the important technologies for developing Environmental Scenario Generator. As a result of this study, a fuzzy retrieval algorithm composed of four main parameters(RV, MF, FRA, and MRV) was presented. This study suggests that the RV can be used as 14 m/s for wind speed and 80 mm/d for precipitation to search the date of storm accompanied by high wind. The MF, the FRA, and MRV can be used sigmoid, 0.2, and 1 respectively. The algorithm proposed in this study is expected to be very useful for searching the date on which weather phenomena necessary for simulation occurred.

• Journal of the Korea Society for Simulation
• /
• v.29 no.3
• /
• pp.27-40
• /
• 2020

When analyzing the effectiveness of a defense system in a virtual battlefield with a simulation model is referred to as forward simulation, reverse simulation is required to design a good defense system with high effectiveness. That is, using the simulation model, it is necessary to find the engineering factors, measures of performance, and operational tactics that are demanded to achieve high effectiveness of the system. However, the efficiency of reverse simulation is still a concern since many replications of forward simulation are required for conducting reverse simulation. In this paper, we introduce various efficient algorithms to reduce the number of replications and a reverse simulation tool for utilizing these algorithms easily. The tool allows practitioners to easily and efficiently conduct reverse simulation for design a good defense system based on simulation models. This is demonstrated with the case studies on the design of warship's defense system and the design of military network system.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.129-134
• /
• 1994

A Laser Cutter is designed for the precise fabrications in the shipyards recently. The cutter is a gantry type one with specified functions of movability and strength in order to satisfy the workability. The gantry frame should move with a certain velocity in a relatively short time for the proper cutting of the object materials. The gantry is fitted with ball screw and the acceleration field is formed by actuating this ball screw. The relative displacement should be within the allowable design criteria to make sure the precise cutting of the materials by the laser. In this paper, modal and structural analysis for a Laser Cutter which is commonly used in the shipyards, is carried out to check the design criteria of the system. The system is modeled by placing the proper shell and soils finite elements and fictitious mass properties to represent the real one. The way how to extract the loading conditions based on the given velocity criteria of the system is presented. Static structural analysis is performed and the results came out as expected. Modal analysis for finding eigen-values and mode shapes of the system is performed and it is shown that the time dependent dynamic analysis is unnecessary for this system for its operating circumstances.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.19-30
• /
• 2016

This paper addresses the problem of how to effectively use virtual reality(VR) for improving the quality of safety training systems. As the working environment and the working system in the industry are more and more complex and large-scaled, the concern with system safety is accordingly growing. Safety training systems are regarded as an effective way for increasing workers' interest in system safety and enhancing their ability of preventing and handling accidents/incidents. Recently, it has been reported that VR would be effectively used for improving the quality of safety training systems, with its technically specialized features. However, little attention has been given to the problem of how to effectively use VR for safety training systems. In order to make the best use of new technology such as VR, it is important to examine its advantages and disadvantages and the contexts to which its use can be beneficial. This paper firstly reviews the current status of safety training systems and the use of VR for safety training systems in the inside and outside of the country. Next, we summarize the interview with safety managers in four manufacturing companies, which was conducted to understand the requirements of stake-holders of the issue. Based on the review and the interview, we suggested the ways of using VR in safety training systems in an effective manner. They are described from the four perspectives: development and maintenance cost, lack of specialized workers, design of accident scenarios used with VR, and empirical demonstration of the effectiveness of VR in safety training.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.30-34
• /
• 2019

We analyzed how the features in plasma information based virtual metrology (PI-VM) for SiO₂ etching depth with variation of 5% contribute to the prediction accuracy, which is previously developed by Jang. As a single feature, the explanatory power to the process results is in the order of plasma information about electron energy distribution function (PI_EEDF), equipment, and optical emission spectroscopy (OES) features. In the procedure of stepwise variable selection (SVS), OES features are selected after PI_EEDF. Informative vector for developed PI-VM also shows relatively high correlation between OES features and etching depth. This is because the reaction rate of each chemical species that governs the etching depth can be sensitively monitored when OES features are used with PI_EEDF. Securing PI_EEDF is important for the development of virtual metrology (VM) for prediction of process results. The role of PI_EEDF as an independent feature and the ability to monitor variation of plasma thermal state can make other features in the procedure of SVS more sensitive to the process results. It is expected that fault detection and classification (FDC) can be effectively developed by using the PI-VM.