• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.131-139
• /
• 2004

This paper proposes a variable-Q digital graphic equalizer with the opposite filters. A method for designing the proposed equalizer is also presented. In the proposed variable-Q equalizer, we adjust the Q-factor of the equalizer filter depending on the gain, yielding an improved equalizer performance. Also, by increasing the Q-factor of the opposite filters gracefully as the gain becomes greater, the inter-band interference can be removed effectively. We shall show that the frequency response of the proposed equalizer can reproduce the user's gain setting faithfully.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.311-320
• /
• 2008

In this paper, a new variable active inductor using a conventional grounded active inductor with feedback variable LC-resonator is proposed. The grounded active inductor is realized by the gyrator-C topology and the variable LC-resonator is realized by the low-Q spiral inductor and varactor. This variable LC-resonator can compensate the degradation of Q-factor due to parasitic capacitance of a transistor, and the frequency range with high Q-factor is adjustable by resonance frequency adjustment of LC-resonator. The fabricated variable active inductor with Magnachip $0.18{\mu}m$ CMOS process shows that high-Q frequency range can be adjusted according to varactor control voltage from 4.66 GHz to 5.45 GHz and Q-factor is higher than 50 in the operating frequency ranges. The measured inductance at 4.9GHz can be controlled from 4.12 nH to 5.97 nH by control voltage.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.179-182
• /
• 2002

본 논문에서는 디지털 이퀄라이저에 대하여 검토하고, 대역 및 이득에 따라 Q-factor를 가변시키는 디지털 이퀄라이저 필터를 제안한다. 제안한 기법은 고정된 Q-factor를 사용하거나, 대역에 따라 Q-factor를 결정하는 기존의 방법들에 비해 가청 주파수 영역에서의 대칭성과 이득 리플 등의 측면에서 우수하고, 기존의 방법과 동일한 수준의 하드웨어 복잡도를 보인다. 또한, 중심 주파수 선정에 따른 성능 변화에 대해서도 고찰한다.

• Journal of Broadcast Engineering
• /
• v.8 no.1
• /
• pp.3-10
• /
• 2003

This paper proposes a variable-Q digital graphic equalizer in which each equalizer filter has different Q-factor depending on the band as well as the gain. The proposed equalizer demonstrates the symmetric frequency response over the audible frequency range. While maintaining the similar level of hardware complexity, the proposed equalizer yields an actual response that is quite close to the desired one, as compared with the conventional equalizers. Also, we investigate how the performance is affected by the center frequencies of the filters.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.1038-1043
• /
• 2012

In this work, a high tunable capacitor using a multi-layer dielectric of BZN/BST/BZN is designed and characterized for reconfigurable RF applications. By utilizing a high tunable BST ferroelectric and a low-loss BZN paraelectric thin film, a multi-layer dielectric of BZN/BST/BZN obtained a tunability of 47 % and $tan{\delta}$ of 0.005. The fabricated tunable capacitor on a quartz wafer using this multi-layer dielectric achieved a Q-factor of 10 and tunability of 60 % at 800 MHz and 15 V. Its size is $327{\times}642{\mu}m2$.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.4
• /
• pp.397-404
• /
• 2004

This paper proposes a variable speed control scheme of grid-connected wind power generation systems using cage-type induction generators. The induction generator is operated in indirect vector control mode, where the d-axis current controls the excitation level and the q-axis current controls the generator torque, by which the speed of the induction generator is controlled according to the variation of the wind speed In order to produce the maximum output power. The generated power flows into the utility grid through the back-to-back PWM converter. The line-side converter controls the dc link voltage by the q-axis current control and can control the line-side power factor by the d-axis current control. Experimental results are shown to verify the validity of the proposed scheme.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.176-182
• /
• 2010

This paper proposes that an inverse class-E amplifier is used a tunable parallel resonator at output port in order to maintain a high power-added efficiency(PAE) and output power with wide frequency ranges. A tunable circuit has a constant Q factor at operating frequency ranges and because of using varactor diode, the inductor and capacitor values of resonator can be changed. Also, the inductance value for zero-current switching (ZCS) is implemented a lumped element and the capacitance value is made a distributed element for phase compensation. The inverse class E amplifier using tunable parallel resonator is obtained to deliver 25dBm output power and achieve maximum power added efficiency(PAE) of 75% at 65-120MHz frequency ranges.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1566-1573
• /
• 2016

This paper presents a beam-forming receiver with polyphase In-phase/Quadrature-phase (I/Q) network for airborne communication. In beam-forming receiver, the insertion loss (IL) difference between input path increases the receiver noise figure (NF). The major element for generating IL difference is the impedance variation of phase shifter. In order to maintain a constant IL in every phase, this paper propose a lossless polyphase I/Q network based beam-forming receiver. The proposed lossless polyphase I/Q network has low Q-factor and high impedance for drive back-end VGA (Variable gain amplifier) block with low insertion loss. The 2-stage VGA controls in-phase and quadrature-phase amplitude level for vector summation. The proposed beam-forming receiver prototype is fabricated in TSMC $0.18{\mu}m$ CMOS process. The prototype cover the $360^{\circ}$ with $5.6^{\circ}$ LSB. The average RMS phase error and amplitude error is approximately $1.6^{\circ}$ and 0.3dB.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.532-537
• /
• 2005

In order to develop a tunable resonator which can be easily operated by DC bias and applied for microwave tunable filters and devices using ferroelectric thin or thick films, the non conductor backed-and conductor backed- coplanar stripline resonators have been designed and analyzed. They have been designed to be operated at 25 GHz which involve coplanar stripline input and output ports. The resonators have been simulated and analyzed using Ansoft HFSS. The research has been focused on the Quality factor of the coplanar stripline resonator. The conductor Q, box Q, and radiation Q of the resonators have been analyzed and calculated according to the substrate thickness & conductor width of the resonators. From these parameters, the loss factors of the coplanar stripline resonator have been investigated. The conducting Q of the coplanar stripline resonator has no relation with the thickness of dielectric substrate and increases as the conductor width increases. The box Q has no much relation with the thickness of substrate and the conductor width, which is above 2000. The radiation loss increases as the thickness of substrate and the conductor width increase. To decrease the radiation loss of the coplanar stripline resonator, a conductor backed coplanar stripline resonator has been proposed which has the unloaded Q of 170.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3425-3430
• /
• 2013

The fast-growing market in wireless communications has led to the development of multi-standard mobile terminals. In this paper, a frequency-tunable active RC bandpass filter for multi-standards wireless communication system is designed using an active inductor. The conventional bandpass filter design methods employ the high order filter or high quality factor Q to improve the stopband attenuation characteristics and frequency selectivity of the passband. The proposed bandpass filter based on the high Q active inductor has an improved frequency characteristics. The center frequency and gain of the designed bandpass filter is tuned by employing the tuning circuit. We have performed the simulation using TSMC $0.18{\mu}m$ process parameter to analyze the characteristics of the designed active RC bandpass filter. The bandpass filter with Q=20.5 has 90MHz half power bandwidth at the center frequency of 1.86GHz. Moreover, the center frequency of the proposed bandpass filter can be tuned between 1.86~2.38GHz for the multi-standards wireless communication system using the capacitor of the tuning circuit.