• Journal of Energy Engineering
• /
• v.9 no.2
• /
• pp.117-122
• /
• 2000

풍력발전시스템은 일정속과 가변속 풍력발전시스템으로 나누어진다. 일정속 풍력발전시스템은 유도발전기를 이용한 시스템이 주종을 이루고, 가변속 풍력발전시스템은 동기발전기-인버터로 이루어진다. 본 논문에서는 피치컨트롤이 장착된 두 시스템을 분석하여, 피치컨트롤의 제어 알고리즘을 유도하고 공기역학적 출력제어 국면에서 두 시스템의 출력제어를 비교 분석하고자 한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.293-296
• /
• 1998

본 논문에서는 다양한 멀티미디어 서비스를 위해 가변율 half rate 음성 부호화기를 설계하였다. 유, 무성음과 묵음의 구분을 위해 본 논문에서는 프레임 에너지와 음성 파라메터들을 이용한 효과적인 voicing 결정 알고리즘을 사용하였다. 유성음을 위한 half rate 음성 부호화기는 저속에서 좋은 특성을 보이는 generalized AbS구조를 이용하였다. LPC 계수는 LSP 계수로 변환한 후 predictive 2-stage VQ를 통해서 양자화하며, 여기 신호는 음질저하를 최소화하며 복잡도를 감소시킨 shift 방식의 대수적 고정 코드북 구조를 사용하고, 적응코드북과 여기코드북의 이득은 VQ로 양자화 하였다. 무성음을 위한 부호화기는 대부분이 유성음을 위한 부호화기와 동일하지만, 무성음에서는 피치간 상관도가 매우 낮으므로 피치 보간 방법을 사용하지 않고 개루프로 피치 lag를 찾은 후 전체 프레임에 사용한다. 1 kb/s 부호화기는 묵음 구간과 주변소음 구간에 사용되며 이 구간의 신호를 피치 성분이 미약한 주변소음들로 제한하고 이에 최적인 부음성 부호화기를 설계하였다. 최종적으로 완성된 가변율 half rate 부호화기는 voice activity factor(VAF)가 0.47인 시험음성에서 약 2.6 kb/s의 평균 전송률을 보였다. 주관적 음질 평가의 일환으로 IS-96 표준 코덱인 가변율 8 kb/s QCELP와 A-B preference 시험을 실시하였다. 시험 결과 평균전송률이 약 2배인 가변율 8 kb/s QCELP 보다 우수한 음질 성능을 보였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.11
• /
• pp.894-899
• /
• 2009

Aerodynamic power and torque of wind turbine are highly nonlinear and its operation mode depends on control strategies. Therefore, it is essential to define steady-state curves for the purpose of control and operation of wind turbine system. The steady-state curves of wind turbine can be defined by determining its operating points. In this paper, an algorithm to determine operating points of variable-speed variable-pitch wind turbine is presented on the basis of pitch-to-feather control strategy. And this algorithm is applied to obtain steady-state curves for an 1.5MW wind turbine.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.7-13
• /
• 2002

This paper introduced a new hybrid genetic algorithm, verified its performance, and applied it to the optimization of blade design and pitch control for 30kW pitch-controlled variable-speed horizontal-axis wind turbine system to determine the optimum blade chord and twist distributions that maximize the energy production for a given Weibull wind distribution and the optimum blade pitch angles that maintain constant power output.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.231-234
• /
• 1998

시간영역에서 유성음의 피치를 조절하기 위해 한피치구간의 신호 중에서 성문이 닫힌 구간의 특성을 추정한 파라미터로 성문 닫힌 구간의 신호에 연속하여 선형적으로 연장 또는 축소하므로써 고 음질을 유지하면서도 자유롭게 피치를 조절할 수 있는 방법을 제안하였다. 제안된 방법은 PSOLA 기법에서와 같은 window의 적용이나 신호의 겹침에 의한 영향이 최소화되므로 보다 명료한 합성음을 얻을 수 있었다.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.59-69
• /
• 2011

5MW wind turbine is regarded as a promising system for offshore wind farms in the western sea of Korean. And the wind turbine is developed in many companies but not much information is known about it. In this study, aerodynamics and control characteristics depending on several control methods is reviewed on 5MW wind turbine, in which configuration data of the turbine are used from the previous study of NREL. For the calculations, GH_Bladed, which is certificated software by GL, is used and compared with data from FAST code of NREL. This study shows that how much power production, and aerodynamic performances and loads can be obtained with different controls in the operation of 5MW wind turbine, which is expected to be useful in the design of the wind turbine system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.10
• /
• pp.891-898
• /
• 2007

Optimal aerodynamic design for the pitch-controlled horizontal axis wind turbine and its aerodynamic performance for various pitch angles are performed numerically by using the blade element momentum theory. The numerical calculation includes effects such as Prandtl‘s tip loss, airfoil distribution, and wake rotation. Six different airfoils are distributed along the blade span, and the special airfoil i.e. airfoil of 40% thickness ratio is adopted at the hub side to have structural integrity. The nonlinear chord obtained from the optimal design procedure is linearized to decrease the weight and to increase the productivity with very little change of the aerodynamic performance. From the comparisons of the power, thrust, and torque coefficients with corresponding values of different pitch angles, the aerodynamic performance shows delicate changes for just $3^{\circ}$ increase or decrease of the pitch angle. For precisive pitch control, it requires the pitch control algorithm and its drive mechanism below $3^{\circ}$ increment of pitch angle. The maximum torque is generated when the speed ratio is smaller than the designed one.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.11-15
• /
• 2011

In this paper, a methodology for the power control of a wind turbine, which is the variable-speed and variable-pitch (VSVP) control system, is introduced. This control methodology maximizes the capability of the turbine to extract maximum power from the wind in the regions with low wind speeds. Further, it regulates the wind-turbine power as the rated power in the case of the regions with high wind speeds. A simple drive train model is used to design the VSVP control system. The methodology for VSVP control is mechanized by controlling the generator torque and blade pitch. Finally, some simulation results for the VSVP control to a MW wind turbine are discussed in this paper.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.609-617
• /
• 2014

Even though the variable pitch control of a wind turbine blade is known as an effective component for power control over the rated wind speed, it has limited applicability to small wind turbines because of its relatively high cost on the price of small wind turbine. Instead, stall control is generally applied in the blade design without any additional cost. However, stall delay can frequently be caused by high turbulence around the turbine blade, and it can produce control failures through excessive rotational speed and overpowering the electrical generator. Therefore, a passive pitch control module should be considered, where the pitch moves with the aerodynamic forces of the blade and returns by the elastic restoring force. In this study, a method to calculate the pitch moment, torque, and thrust based on the lift and drag of the rotating blade wing was demonstrated, and several effective wing shapes were reviewed based on these forces. Their characteristics will be estimated with variable wind speed and be utilized as basic data for the design of the passive pitch control module.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.935-944
• /
• 2015

This study performs the dynamic modeling and the simulation of variable speed wind power system and implements the models of wind speed, wind turbine & PMSG, and MPPT & pitch control as well. The simulation of wind turbine was performed by using the power coefficient and other simulation parameters which were extracted with reference to the commercial 5MW class wind turbine data. As the result of this simulation, MPPT control is confirmed, maintaining the maximum power coefficient as far as the rated speed 12[m/s]. Over 12[m/s] wind speed, this wind power system makes it possible to keep the stable output by controlling the pitch angle.