• Title/Summary/Keyword: 가변 구조

Search Result 1,195, Processing Time 0.028 seconds

Design of a Variable Structure Speed Controller having a Dead Zone Switching layer for the Sinusoidal type Brushless DC Motor (데드 존 스위칭 영역을 갖는 정현파형 브러시리스 직류전동기의 가변구조 속도제어기 설계)

  • 김세일;최중경;박승엽
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.3 no.3
    • /
    • pp.639-650
    • /
    • 1999
  • In this paper, a chattering alleviation VSS controller for the sinusoidal type BLDC motor is designed. Dead Zone function is proposed to change the chattering occurring in the transient state from high frequency to low frequency and time-varying gains are applied for the control input to eliminate the steady state excessive chattering in the conventional ISM. The proposed Dead Zone function represents the sliding layer composed of two switching surfaces and if a state vector exists in this layer, the chattering don't occur. Simulation and experimental results confirm the useful effects of the above algorithm.

  • PDF

Design of Compiler & Variable-Length Instructions for SIMD Structured Shader (가변길이 SIMD구조 쉐이더 명령어 및 컴파일러 설계)

  • Kwak, Jae-Chang;Park, Tae-Ryoung
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.14 no.12
    • /
    • pp.2691-2697
    • /
    • 2010
  • Shader instructions and Compiler are designed for supporting 3D graphic shader 3.0 API. Variable-length instructions are proposed to reduce the size of hardware of graphic processor in SIMD structure by shortening the length of instructions. The designed shader compiler supports variable and two phased structured instructions, and can be programmable at ESSL level. Conformance Test proposed by Khronos group is accomplished to verify the design result of instructions and complier. The test result shows overall average 37% performance improvement at the 16 functions of basic GL shader.

A study on Design and Fabrication of Tunable Microstrip Ring Band Pass Filter using Varactor Diode (Varactor 다이오드를 이용한 가변 만이크로스트립 링 대역통과 필터의 설계 및 제작에 관한 연구)

  • 강원석;권성수;김진섭;남윤관;나극환
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2000.11a
    • /
    • pp.83-86
    • /
    • 2000
  • 가변 필터는 송수신기에서 회로를 간단히 하여 특히 멀티채널을 사용하는 송수신기에서 중추적 역할을 담당하게 된다. 본 논문에서는 소형경량이고, 구조가 단순하여 제작이 간단하며, MMIC화하기 쉬운 실용적인 가변필터를 설계 및 제작하여 그 사용가능성을 제안하였다. 본 논문에서는 중심주파수 1.95GHz, 통과대역이 100MHz인 대역통과 링 필터를 Split 모드 방식으로 구현하고 이를 바탕으로 300MHz의 가변대역폭을 갖는 필터를 제작하였다. 이 필터의 대역폭을 가변하기 위하여 바이어스전압에 따라 커패시턴스가 변화하는 Varactor 다이오드를 사용하였다.

  • PDF

A Study on the Acousto-Optical Wavelength Tunable Filters Utilizing a SAW Guide Variable Directional Coupler (방향성 가변결합 구조의 음향파 도파로를 이용한 음향광학형 파장가변 필터에 관한 연구)

  • 정기조;임경훈;정흥식
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2001.02a
    • /
    • pp.152-153
    • /
    • 2001
  • 파장 가변형 광 필터와 파장 선택형 광 스위치는 파장분할다중 광통신 및 광 교환 시스템을 구현하는데 매우 중요한 소자들 중의 하나이다. 특히 음향광학효과를 이용한 파장 가변형 광 필터(AOTF : Acousto-Optic Tunable Filter)는 150nm 이상의 넓은 파장 가변범위, 1.5nm이하의 좁은 통과대역폭, 수 $\mu\textrm{s}$ 정도의 비교적 빠른 스위칭 속도 그리고 여러 개의 파장 채널을 동시에 선택할 수 있는 장점들을 가지고 있지만, 한편으로 표면 음향파(SAW: Surface Acoustic Wave) 구동에 필요한 RF 파워와 부 모드 (sidelobe)가 비교적 크다는 단점 때문에 실용화에 많은 제약을 받아왔다. (중략)

  • PDF

Audio Coder Using Variable Subband Wavelet Filter (가변 대역분할 웨이블릿필터를 이용한 오디오 부호화기)

  • 김준성;강현철;변윤식
    • The Journal of the Acoustical Society of Korea
    • /
    • v.17 no.5
    • /
    • pp.57-62
    • /
    • 1998
  • 본 논문에서는 입력신호의 시변특성에 따라 분석 필터의 대역을 가변 시키는 필터 뱅크의 구조를 제안한다. 제안된 필터뱅크는 일반적으로 32개의 균일한 대역으로 나누어 임 계대역의 표현을 적절히 표현하지 못하는 Polyphase 필터의 단점을 극복하면서 시스템 설 계에 높은 계산량을 요구하는 QMF-tree 필터의 단점을 보완한다. 본 연구에서는 분할 대역 은 4개에서 26개의 대역으로 가변하고, 웨이블릿 필터중 Daubechies필터를 사용하였다. 제 안된 구조의 부호화기는 128kbps에서 MPEG-a오디오와 비슷한 수준의 CD 음질을 유지하 며, 연산량 비교결과는 PolyPhase filter를 이용한 MPEG보다 부호화, 복호화 과정을 합쳐 다양한 전송률과 음원에서 평균 19%의 감소를 얻었다.

  • PDF

A Design of Variable Attenuator for MMIC using Slot in the Ground Plane (접지면의 슬롯을 이용한 마이크로파 집적회로용 가변 감쇠기의 설계)

  • 김기래
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.7 no.6
    • /
    • pp.1109-1114
    • /
    • 2003
  • In this paper, the electric characteristic of the SGPS with slot in the ground plane is similar to the parallel resonant circuit. When the slot length in SGPS is equal to the half wavelength of specific frequency, the characteristic of SGPS represent the large attenuation at the specific frequency. We found out the relation between attenuation and resistor on the slot in SGPS and we designed the variable attenuator for MMIC using the variable resistor. This attenuator can be applied to AGC circuit in transceiver if the PIN diode is used replace for resistor.

Optical Noise Reduction using a Digital Potentiometer in a Wireless Optical Differential Detector (무선광 차동검출기에서 디지털가변저항을 이용한 잡음광의 감소)

  • 이성호
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.13 no.6
    • /
    • pp.599-604
    • /
    • 2002
  • In this paper, a digital potentiometer is used as a load resistor of a wireless optical differential detector with a polarizer, to improve the noise reduction capability. In this structure, the noise voltages of the two photodiodes are made equal by controlling a digital potentiometer and the optical noise is cancelled out. With a digital potentiometer, the signal to noise ratio is enhanced by about 23 dB.

Hysteretic Variable Structure Controller for PV Simulator (PV Simulator를 위한 히스테리시스 가변구조 제어기)

  • Na, Jaeho;Kim, Hyosung
    • Proceedings of the KIPE Conference
    • /
    • 2015.07a
    • /
    • pp.263-264
    • /
    • 2015
  • 태양광 발전용 PCS(Power Conditioning System)의 성능을 평가를 위해 사용되는 PV Simulator는 전압제어방식 또는 전류제어방식으로 제어할 수 있다. 각각의 제어방식을 개별적으로 개방전압 운전점에서 단락전류 운전점까지 부하를 가변 하였을 때 서로 상반된 구간에서 불안정한 구간이 발생한 것을 실험을 통해 발견하였다. 이렇게 불안정한 제어 구간에서는 PV Simulator의 출력 전압과 전류가 심하게 바운싱되기 때문에 전 운전 범위에서 PCS의 성능평가를 하는데 제한이 있을 뿐만 아니라, 하드웨어에도 손상을 줄 수 있다. 본 논문은 전압제어방식과 전류제어방식이 각각 안정한 제어 구간에서 불안정한 제어 구간으로 이동되기 전에 히스테리시스 가변 구조로 제어함으로써 두 제어방식의 장점을 극대화 시킨 PV Simulator 제어기를 제안한다.

  • PDF

Optical cross-connects based on a WDM MUX/DEMUX pair and tunable fiber Bragg gratings (한 쌍의 파장 다중화기/역다중화기와 파장가변 광섬유 브래그 격자를 이용한 광 크로스-커넥트)

  • 김정호;정재훈;김성철;이병호
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.78-79
    • /
    • 2000
  • 재구성이 가능한 광 크로스-커넥트(optical cross connect)는 전광 네트워크를 구성하기 위한 핵심소자 중의 하나이다. 일반적인 구조의 파장분배기는 공간분할 스위치(space division switch)를 두 쌍의 파장 다중화기(multiplexer)와 역다중화기(demultiplexer)의 가운데에 삽입하여 구현된다$^{(1)}$ . 최근에, 광섬유 브래그 격자와 광스위치 쌍을 직렬 연결하여 재구성이 가능한 광 크로스-커넥트가 제안되었다$^{(2)}$ . 그러나, 이 구조는 광신호에 따라 광섬유 브래그 격자에 반사되면서 겪는 광스위치에 의한 삽입손실이 다르다는 문제점이 있다. 이러한 문제를 해결하기 위하여 본 논문에서는 한 쌍의 파장 다중화기/역다중화기와 파장가변 광섬유 브래그 격자를 이용한 새로운 구조의 광 크로스-커넥트를 제안하고자 한다. 또한, 제안된 구조는 일반적인 구조의 파장분배기에 비해 파장 다중화기/역다중화기의 개수를 반으로 줄일 수 있는 장점이 있다. (중략)

  • PDF