• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.740-741
• /
• 2015

This paper presents the design and dynamic analysis of surface-mounted type variable flux permanent magnet(VFPM) machines. VFPM machines with a low-coercive-force (LCF) magnetic material have been studied extensively for their potential to improve the efficiency and extend the flux-weakening range of permaennt magnet (PM) machines. In order to implement the design of the VFPM machines effectively, we perform a characteristic analysis of the LCF magnet with respect to design parameters. The analysis results of the designed VFPM machines are compared with measured results, and the validity of the design of the VFPM machines is confirmed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.425-431
• /
• 1999

Nowadays development of electric and optical devices needs precision more and more. This study focuses on hydrostatic journal bearing of grinding wheel spindle. It presents theoretical analysis about cylinder type self-controlled restrictor to control flux of oil flowing into pockets around the hydrostatic journal bearing. As a result of this analysis, optimal properties to maximize bearing stiffness such as initial cross distance, supply pressure, diameter of two supply holes, pre-load of spring and clearance between spindle and housing can be obtained. Therefore, by using them it is possible to estimate bearing stiffness and the performance of grinding wheel spindle can be improved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.418-422
• /
• 2001

This paper presents a developed squired cage induction motor for axial flow fan. The developed squirrel cage induction noter for axial flow fan is exchanged the position, rotor and stater. In this method a fan blade is attached to outside rotor. So we can protect the motor from rain and reduce noise, and there is no need to have bending duct to locate the fan motor. Carried out experimental test with this induction motor, and the results were as follows. Starting torque was 21kgㆍcm@120V, maximum efficiency was 0.84@120V. The characteristics of tests were the same as double squirrel-cage type IM.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.663-671
• /
• 2014

The Battlefield Management System(BMS) of Ground Fighting Vehicles has employed its own message format but there have been requirements of using the standard message format, KVMF. To meet these requirements, we analyzed BMS and KVMF and incorporated KVMF into BMS. In this paper, we would like to introduce our implementation of KVMF in BMS.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1259-1265
• /
• 2003

We present a new post-fabrication frequency tuning method for laterally driven electrostatic microresonators using a DC-biased electrostatic comb array of linearly varied finger-length. The electrostatic tuning force and the equivalent stiffness, adjusted by the DC-biased tuning-comb array, have been formulated as functions of geometry and DC tuning voltage. A set of frequency-turnable microresonators has been designed and fabricated by 4-mask surface-micromachining process. The resonant frequency of the microfabricated microresonator has been measured for a varying tuning voltage at the reduced pressure of 1 torr. The maximum 3.3% reduction of the resonant frequency is achieved at the tuning voltage increase of 20V.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.799-802
• /
• 2003

시스템이 슬라이딩모드의 존재조건을 만족하는 경우, 전동기의 상태가 전동기의 파라미터에 의존 하지 않고 결정되는 절환 초평면에 수렴하기 때문에 파라미터에 불감한 응답을 나타낸다. 본 연구는 소형 유도전동기에 의한 외란 및 파라미터의 변동에 대하여 로바스트(robust)와 동시에 정확한 응답을 나타내는 교류서보 전동기를 이용한 서보 시스템을 설계한 것이다. 이를 실현하기 위해서 가변구조 제어 이론에 기초한 슬라이딩모드 제어규칙을 결정하고 유도전동기 자계 슬립주파수형 벡터제어를 실현한다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.560-562
• /
• 2010

본 연구의 목적은 농형 유도 발전기를 이용한 가변속 독립 운전형 풍력 발전 시스템의 최대 전력 추종 제어기법을 제안한다. 제안된 기법은 M-G 세트로 구성하여 풍력터빈의 역할을 하는 터빈 시뮬레이터를 직류전동기의 토크제어를 이용하여 구현하였다. 농형 유도발전기는 벡터제어를 기본으로 간접 벡터제어를 위하여 유도발전기를 좌표 변환하여 모델링하고 이것을 기초로 제어알고리즘을 도출하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.11
• /
• pp.563-567
• /
• 2001

ln this paper, the designed DVSC(Discrete Variable Structure Controller) is applied to the robust control of voltage controlled APF(Active Power Filter). The voltage controlled APF has good characteristics of reducing harmonic current and harmonic voltage simultaneously. However, voltage controlled APF with large capacitor has slow dynamic response. For improving the dynamics and robustness against to disturbances, DVSC is adopted. According to the results of experiment and simulation, it is proved that the proposed system has the performance of improving dynamic response and robustness.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.121-123
• /
• 2002

This paper presents the finite-element (FE) analysis results of a permanent-magnet (PM) generator for wind-power applications under different operating conditions. Finite-element method is applied to analyze generator performance at no-load and load with variable resistance and inductance. The results of FE analysis show that proposed PM generator is a useful solution for small-scale wind-turbine systems.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.658-660
• /
• 1999

셀단위 무선망에서 핸드오프 하는 호에 대하여 QoS(Quality of Service)를 보장하기 위하여 지금까지 고정적 채널 할당방식, 분산된 호수락제어 방식 그리고 최대치 에측 채널할당 방식등이 제안되어 왔다. 그중 최대치 예측 채널 할당 방식은 핸드오프하는 호의 패턴을 예상하여 새로운 호에 대한 호수락 결정을 할 수 있는 방식으로 제안하였으나 불필요하게 많은 패턴에 대하여는 적합하지 않은데도 그 예상확률을 똑같이 적용하고 있다. 이곳에서는 핸드오프하는 호가 일정한 이동 패턴을 가지고 셀간을 이동하는 경우를 고려하여 일정한 횟수 이상의 반복적인 패턴에 대하여만 그 예상 확률을 적용함으로써 핸드오프 하는 호에 대하여 좀 더 신뢰성 있게 채널을 할당하는 방식을 제시하였다.