• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.35-36
• /
• 2014

양방향 QZSI(Quasi Z-Source Inverter)를 이용한 유도전동기 제어 시스템은 암단락 상태를 제어에 이용할 수 있어서 추가 컨버터 없이도 단일 구조로 가변 배터리 전압을 일정하게 승압할 수 있다. 암단락을 이용한 승압은 직류단 전압제어가 보장되어야 하며 전압 제어기 성능이 인버터 출력 전류 제어에 상당한 영향을 미친다. 전압제어는 임피던스 네트워크의 커패시터 전압을 일정하게 제어하거나 직류단 전압을 직접적으로 또는 간접적으로 일정하도록 제어하여 구현할 수 있다. 본 논문에서 양방향 전력 전달이 가능한 QZSI를 통해 유도 전동기를 제어하며 시뮬레이션과 실험을 통해 이를 검증한다.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.9-10
• /
• 2014

최근 신재생에너지 및 전기자동차, 통신 IT 서버 전원 및 가전기기 등의 발전에 따라 고 전력밀도(High Power Density), 고 응답(Fast Transient Response) 및 고정밀(Tight Regulation) 출력제어를 위한 다 출력 절연형 DC/DC 컨버터가 개발 및 연구되고 있다. 본 논문에서는 개별적인 정밀제어를 요구하는 다 출력 DC-DC 컨버터에 대한 내용으로 위상천이(Phase-shift) DC-DC 컨버터와 LLC 공진컨버터 제어개념을 하나의 주회로를 사용하여 위상천이제어(Phase-shifted Modulation, PM)와 가변주파수제어(Variable Frequency Modulation, FM)를 통해서 개별적으로 정밀 제어할 수 있는 하이브리드 다 출력 3레벨 DC-DC 컨버터에 관한 내용이다.

• Transactions of Materials Processing
• /
• v.10 no.6
• /
• pp.500-508
• /
• 2001

The integration of Rapid prototyping (RP) and Rapid Tooling (RT) has the potential for rapid net shaping of thee-dimensional parts, which have a geometrical complexity. In this study, a new R)P process, (VLM-SP), was proposed to manufacture net shapes of three-dimensional prototypes and it was shown that VLM-SP is an effective and economic process through the comparison of building time, building cost and dimensional accuracy for the test parts with the commercial RP processes ; LOM and FDM. In addition, the metal parts, which are a spanner shape and a clover punch, were produced by the plaster casting as one of RT using the prototypes of VLM-SP.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.154-160
• /
• 1997

On the base of the fractional Fourier transform(FRT) which is known as a generalized form of the conventional Fourier transform, the fractional correlation has been implemented. Shift-variance property of the fraction correlation has been evaluated and compared with the shift-invariance of the conventional correlation. The fractional correlation operation has been implemented by using a planar optics configuration which integrates all of the optical components on a single glass substrate. A good agreement between the experimental and calculated results has been obtained.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.315-319
• /
• 2016

This paper proposes a simple adaptive sliding mode control algorithm for controlling a permanent magnet synchronous generator (PMSG) of a MW-class direct-driven wind turbine system. The proposed adaptive sliding mode controller does not require accurate knowledge of the PMSG parameter or turbine torque values. The proposed controller can accurately track the reference angular speed computed by the maximum power point tracking(MPPT) algorithm. Finally, this paper gives Matlab/Simulink simulation results to verify the practicality and effectiveness of the proposed adaptive sliding mode controller.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.591-595
• /
• 1989

The application of Variable Structure System (VSS) to the position control of a Permanent Magnet Synchronus Motor is discussed. VSS is expected to be a powerful and potential tool to construct new control strategy for ac machines, since the resulting system shows robust performance to parametic variations and disturbances. An adaptive VSS which can make corrections or adjustments in the parameters of the control device of the VSS in accordance with the current values of the plant parameters and the constraints on the control is preposed. Various simulation results are reported to show the validity of the proposed control method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.6
• /
• pp.323-332
• /
• 2003

This paper proposes a variable structure position controller for an induction motor(IM) which uses a reaching law and an integral compensating nonlinear switching function. With the integral compensating nonlinear switching function, both very low overshoot and high steady state control accuracy can be obtained by compensating the states chattering problem due to the unmodelled dynamics of inverter and feedback sensors. With the reaching law, reaching mode can be established quantitatively during transient state so that dynamic control performance is improved. For experiment a digital servo driver which consists of a DSP and an IPM inverter was developed. With the various experimental results, IM position control performance was verified.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.210-211
• /
• 2005

Desuperheater is a passive device to control the temperature of steam in various plants. However, in spite of its simple structure, the accurate prediction of a desuperheater is very difficult because there are many designed factors for the design of a desuperheater. In this study, the theory of heat transfer phenomena in a desuperheater was developed and the various design factors are evaluated. As a results, we confirmed that the droplet size of 30 - 200 is best effective for the performance of a desuperheater.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.491-499
• /
• 1994

중대형 컴퓨터생산 라인은 요구 사양의 다양성, 주문의 가변성, 잦은 주문의 변화, 자재의 긴 납기들로 특징지워진다. 이와 같은 생산체계에서의 생산일정계획은 첫째, 자재및 재공의 엄격한 가용성 점검기능, 둘째, 돌발적인 주문에 대비한 안전재공의 유지기능, 셋째, 자재 부족시 완성품의 수를 극대화 시킬수 있는 자재할당처리, 넷째, 자재수급계획의 변동을 흡수할 수 있는 생산 일정계획의 수정기능이 지원되어야 한다. 본 시스템은 이상의 요구조건들을 만족시키는 생산 일정계획 수립시스템으로 현장에서 사용되는 3000-4000가지에 이르는 자재의 보유상황을 엄격히 점검하여 주문된 제품에 대한 자재 사용계획을 수립하고 안전재공으로 관리되는 재공의 보유수량을 점검해서 일정 범위내에 보유수량이 유지되도록 자동으로 생산계획을 수립한다.

• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.87-92
• /
• 2001

Automotive suspension system is a mechanism for isolation of the vibration coming from the road inputs. Recently, the electronically controlled suspension systems which may improve ride and handling performance have been developed. Here, the continuously controlled semi-active suspension system is focused. As a mechanism to control damping forces continuously, a solenoid valve is used. The modeling for the solenoid valve is introduced briefly, a vehicle dynamics modeling is constructed, and then combined system model is completed. To design the efficient control algorithm for the semiactive suspension system the knowledge based fuzzy logic is applied and the technique how to apply the sky-hook theory to the fuzzy logic is developed. Finally, to confirm the improvement of performance the computer simulation is carried out.