• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.5
• /
• pp.204-209
• /
• 2007

We synthesized a series of $CaS_{1-x}Se_x:Eu$ red-emitting phosphors for application in phosphor-converted three-band white light emitting diode(LED). The photoluminescence and structural properties of $CaS_{1-x}Se_x:Eu$ were examined. The $CaS_{1-x}Se_x:Eu$ phosphors have a strong absorption at 455 nm, which is the emission wavelength of a blue LED. CaS:Eu has a red omission peak at 651 nm due to the $4f^65d^1(T_{2g}){\rightarrow}4f^7(^8S_{7/2})$ transition of the $Eu^{2+}$. The emission peak of $CaS_{1-x}Se_x:Eu$ is shifted from 651 to 598 nm with increasing Se content. $CaS_{1-x}Se_x:Eu$ can be used as wavelength-tunable red-emitting phosphors pumped by a blue LED. We also fabricated a three-band white LED by doping $SrGa_2S_4:Eu$ and $CaS_{0.50}Se_{0.50}:Eu$ phosphors onto a blue LED chip.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.435-450
• /
• 2006

Free electron lasers (FELs) are promising sources of coherent radiation that can provide users with radiations having a wide-range frequency-tunability and good spectral characteristics for basic science and industrial applications. Especially in Terahertz or X-ray ranges of spectrum, FELs can generate much stronger radiations than conventional light sources. In this paper, we introduce the working principles and key technologies of FELs, the status and the prospects of FEL developments.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.268-273
• /
• 2004

A finite model eye based on longitudinal spherical aberration is designed by an optimization method. Longitudinal spherical aberration for pupil diameter between 1 mm and 8 mm is graphed theoretically and compared with other model eyes. The chromatic dispersions are adjusted to fit experimentally observed chromatic aberration of the eye. This is a finite model eye with four a spheric refracting surfaces. It has an effective focal length of 15.842 mm. A designed reduced eye has an equivalent power of 63.12 Diopter, curvature radius of 5.281 mm, index of 1.33333, and axial length of 21.123 mm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.307-308
• /
• 2005

본 연구에서는 현재 주로 사용하고 있는 광파장인 980nm, 1310nm, 1480nm, 1550nm 에 대한 안정화된 광파워를 갖는 광원개발이다. 내부에 온도안정화와, 자체 광파워 피드벡에 의한 안정화 회로를 내장하고 있으며, 독립적 혹은 동시적으로 4 개의 광파장을 출력할 수 있도록 구성되어있다. 또한 0$\sim$ -7dBm 사이의 광파워를 0.5dB 단위로 가변시킬 수 있으며, +-0.05dB 이내의 안정성을 갖는다. 또한 RS-232 시리얼 통신으로 PC 와 인터페이스가 가능하며, 광출력 상태를 모니터링하거나 원격으로 광파워를 제어할 수 있도록 구성하였다. 온도범위는 +-0.5도 이내에서 제어가 가능하며, 이러한 부분으로 구성된 4 파장 광원은 +-0.05dB 이내에서 안정화된 광을 출력할 수 있게 되었다. 본 연구 개발을 수행한 결과 레이져 다이오드의 안정화에 대한 확실한 이론적 및 실험적인 결과를 얻게 되었으며, 현재 확산되고 있는 광통신 시장에서 광통신 부품, 광케이블, 통신망 등에서 각종 소자 및 선로의 광학적 특성을 측정하는데 필수적으로 이용될 것이다.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1151-1153
• /
• 1999

3-layer polysilicon 표면미세가공공정을 이용하여 micro zone plate 렌즈와 미러 및 이를 구동하기 위한 구동기를 일체화시킨 마이크로 구동형 광학소자를 설계, 제작하였다. 650nm의 파장대역에서 초점거리가 $500{\mu}m$가 되도록 마이크로 zone plate 렌즈를 설계하였으며, 렌즈의 광학축은 실리콘 기판 상에서 $121{\mu}m$거리에 위치하도록 제작하였다. 마이크로 hinge와 스프링 latch 및 측면지지 plate를 이용하여 마이크로 렌즈와 미러가 실리콘 기판상에서 out-of-plane동작이 가능하도록 하였다. 마이크로렌즈 초점거리의 가변을 위하여 6개의 SDA(Scratch Drive Actuator)어레이를 설계, 제작하였다. 또한 빔 반사를 위한 마이크로 미러를 설계하고 $45^{\circ}$ self-assembly를 위하여 마이크로 hinge와 SDA array를 제작하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1582-1582
• /
• 2000

Rayleigh scattering and laser induced predissociative fluorescence are employed for capturing two-dimensional images of temperature and species concentration in a laminar nonpremixed flame of a diluted hydrogen jet. Rayleigh scattering cross-sections are experimentally obtained at 248nm. Dispersed LIPF spectra of OH and O₂ are also measured in a flame in order to confirm the excitation of single vibronic state of OH and O₂are excited on the P₁(8) line of the A ²∑+ (v＇=3) - X ²∏(v˝=0) band and R(17) line of the Schumann-Runge band B ³∑u- (v＇=0) - X ³∑g-∏(v˝=6), respectively. Fluorescence spectra of OH and Hot O₂ are captured and two-dimensional images of the hydrogen flame field are successfully visualized.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.64-71
• /
• 2006

We developed a fiber-optic temperature sensor system, with 10 fiber Bragg gratings, for abnormal high-temperature monitoring in power systems. We used Gaussian line-fitting algorithm to compensate the spectrum distortion in the wavelength-scanned Farby-Perot filter demodulation scheme. Compared with highest-peak-detection method, the proposed algorithm substantially reduced measurement errors. The overall measurement error was less than 1[%] compared with the reference thermocouple and the linearity error was 0.37[%].

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.4
• /
• pp.35-40
• /
• 2011

An experimental study of the flame response in a turbulent premixed combustor has been conducted in order to investigate mechanisms for combustion instabilities in a lean premixed gas turbine combustor. A lab-scale combustor and mixing section system were fabricated to measure the flame transfer function. Measurements are made of the velocity fluctuation in the nozzle using hot wire anemometry and of the heat release fluctuation in the combustor using chemiluminescence emission. The results show that the flame transfer functions are greatly dependent on the modulation frequency as well as operating conditions such as equivalence ratio. Flame dynamics can be generalized as a function of Strouhal number which is a ratio of flame length to modulation wave length.

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.40-45
• /
• 2011

Design and fabrication of a TCRR (Triple-coupler Ring Resonator) filter which can provide a doubled FSR (Free Spectral Range) compared with a conventional DCRR (Double-coupler Ring Resonator) filter, are discussed. Through the use of a polymer material with a good thermo-optic property and with high contrast between core and cladding polymer, a compact TCRR filter composed of straight and curved buried waveguides of small radius is designed and fabricated. The transmission characteristics from the through and drop ports are measured using a tunable laser and a fiber array block, and the FSR is observed to be 4.4 nm, about twice that of DCRR filter, and almost the same as that obtained from the analysis using a transfer matrix method.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.3
• /
• pp.81-91
• /
• 2003

본 연구에서는 복층으로 구성된 $WSio_2Al$ 금속절연체의 상세를 보여주고 있는데, 금속과 절연체의 합성물질은 태양 흡수율의 설계와 열적인 현상을 보여주기 위해 종종 사용된다. 금속의 접착기면 위에 얇은 복층 코팅으로 구성되는 디자인은 태양 스펙트럼의 파장권역에서 선택적 흡수를 위함이다. 본 연구는 태양 복사의 열성능 평가를 위해 금속과 절연체 필름의 방사율, 태양흡수율, 코팅순서, 미 반사층(AR)의 두께, 코팅 두께와 코팅 면수, 전체 코팅 두께 등에 대해 시뮬레이션 하였다. 그 결과 네 겹의 코팅설계에서 $Sio_2AR$ 75 nm 두께와 각각의 층에서 $0.5\sim0.7$의 가변 금속부분 구성이 가장 우수한 성능을 갖는 것으로 나타났다. 또한 시뮬레이션으로 금속과 절연체 합성물의 최적의 구성과 각각의 코팅 두께에 대한 예측이 가능했으며, 최대 태양흡수율은 0.94, 방사율은 0.115의 금속과 절연체의 합성물을 구성할 수 있었다.