• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.496-499
• /
• 2002

In this paper, a phase shifter with shifting photonic bandgap(PBG) cell in linear feedforward amplifier is designed and fabricated in 5GHz wireless LAN band. Now a day, the phase shifter has been fabricated with hybrid type. In this paper, a portion of PBG cell is shifted for the tuning phase. The phase shift was achieved maximum 80o in our PBG structure. Shifting PBG cell has been applied in feedforward main loop to cancel the main two tone signal.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.29-30
• /
• 2013

본 논문에서는 수중통신용 Parametric Array Transducer를 구동하기 위한 고효율 전력증폭기를 제안한다. 수중전력증폭기는 증폭부와 전원부로 나뉘며 증폭부는 Class B push-pull type의 전력증폭기를 사용하며 전력증폭기 구동을 위한 전원부는 기존의 일정전압이 아닌 가변전압을 얻는 Phase-shifted PWM AC/DC 컨버터를 사용하여 고효율로 동작한다. 증폭부는 Class B push-pull type 증폭기를 사용함으로써 뛰어난 선형성이 보장되며 전원 또한 ET(Envelope Tracking)기술을 적용한 가변전압 AC/DC컨버터를 사용하여 고효율로 동작한다. 본 논문에서는 고 효율 수중전력증폭기와 가변전압 AC/DC컨버터의 전력회로를 제시하고 시뮬레이션과 실험을 통하여 특성을 확인하였으며, 수중음향센서를 위한 전력증폭기로 유용하게 사용 될 것을 예상한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.497-502
• /
• 2007

Broadband monolithic SiGe HBT variable gain amplifier with a feedforward configuration have been newly developed to improve bandwidth and dB-linearly controlled gain characteristics. The VGA has been implemented in a $0.35-{\mu}m$ BiCMOS process. The VGA achieves a dynamic gain-control range of 19.6 dB and a 3-dB bandwidth of 4 GHz ($4{\sim}8\;GHz$) with the control-voltage range from 0.6 to 2.6 V. The VGA produces a maximum gain of 9.3 dB at 6 GHz and a output power of -3 dBm at 8 GHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.16-21
• /
• 2007

CMOS variable gain amplifier (VGA) IC designs for the structure monitoring systems of the telemetries were developed. A three stage cascaded VGA using a differential amplifier and a linear-in-dB controller is presented. A proposed VGA is a modified version of a conventional VGA such that the gain is controlled in a linear-in-dB fashion through the current ratio. The proposed VGA circuit introduced in this paper has a dynamic range of 77 dB with 1.5 dB gain steps. It also achieved a gain error of less than 1.5 dB over 77 dB gain range. The VGA can operate up to 10MHz dissipating 13.8 mW from a single 1.8 V supply. The core area of the VGA fabricated in a Magnachip $0.18{\mu}m$ standard CMOS process was about $430{\mu}m{\times}350{\mu}m$. According to measurement results, we can verify that the proposed method is reasonable with regard to the enhancement of dynamic range and the better linear-in-dB characteristics.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.23-29
• /
• 2011

A dB-linearity improved variable gain amplifier (VGA) for GPS receiver is presented. The Proposed dB-linear current generator has improved dB-linearity error of ${\pm}0.15$dB. The VGA for GPS is designed using proposed dB-linear current generator and composed of 3 stage amplifiers. The IF frequency is assumed as 4MHz and the linearity requirement of the VGA for GPS receiver is defined as 24dBm of IIP3 using cascaded IIP3 equation and the VGA satisfies 24dBm when minimum gain mode. The DC-offset voltage is eliminated using DC-offset cancelation loop. The gain range is from -8dB to 52dB and the dB-linearity error satisfies ${\pm}0.2$dB. The 3-dB frequency has range of 35MHz~106MHz for the gain range. The VGA is designed using 0.18${\mu}m$ CMOS process. The power consumption is 3mW with 1.8V supply voltage.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.181-182
• /
• 2011

수중에서는 대기와는 달리 매질의 차이로 인하여 통신의 제약이 따르므로 초음파를 이용하여 정보를 송 수신한다. 수중통신을 하기 위해서는 신호를 증폭시키는 전력증폭기와 초음파를 발생시키는 트랜스듀서가 필요하다. 전력증폭기는 수중에서의 발열과 연료문제로 인하여 높은 효율로 동작하여야한다. 하지만 전력증폭기에 인가되는 고정전압과 출력전압의 차이로 인해 손실이 발생하여 효율이 저하된다. 그러므로 본 논문에서는 전력증폭기의 효율 향상을 위해 출력전압에 따라 인가전압을 가변하는 ET(Envelope Tracking) 기술을 적용하기 위한 4[kW]급, 20[kHz]의 대역폭을 갖는 가변 DC-DC 컨버터를 설계하고 시뮬레이션을 통해 특성을 확인하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.90-95
• /
• 2014

This paper presents a VHF/UHF-band variable gain low noise amplifier for multi-standard mobile TV tuners. A proposed VHF-band variable gain amplifier is composed of a resistive shunt-feedback low noise amplifier to remove external matching components, a single-to-differential amplifier with input PMOS transcoductors to improve low frequency noise performance, a variable shunt-feedback resistor and an attenuator to control variable gain range. A proposed UHF-band variable gain amplifier consists of a narrowband low noise amplifier with capacitive tuning to improve noise performance and interference rejection performance, a single-to-differential with gm gain control and an attenuator to adjust gain control range. The proposed VHF-band and UHF-band variable gain amplifier were designed in a $0.18{\mu}m$ RF CMOS technology and draws 22 mA and 17 mA from a 1.8 V supply voltage, respectively. The designed VHF-band and UHF-band variable gain amplifier show a voltage gain of 27 dB and 27 dB, a noise figure of 1.6-1.7 dB and 1.3-1.7 dB, OIP3 of 13.5 dBm and 16 dBm, respectively.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.146-149
• /
• 2000

SiGe HUT뜰 이용하여 Cellular 주파수 대역(824-849 MHz)에서 MMIC 상향 주파수 혼합기와 가변이득 증폭기를 설계하였다. 동작 전압은 2.7 V 이며, 이중평형 구조의 상향 주파수 혼합기는 12 dB의 변환이득, -0.6 dBm의 1dB 이득압축 출력전력, 30 dB 이상의 LO-RF 단자 격리도 특성, 1.25의 LO-VSWR. 1.34의 RF-VSWR을 가지며, 상호컨덕턴스형 가변이득 증폭기는 35 dB의 최대 선형이득, 13 dBm의 1dB 이득압축 출력전력, 42dB의 가변이득, 23dB의 3차 상호변조 교점 출력전력(OIP$_3$), 1.27의 입력 VSWR, 1.1의 출력 VSWR 특성을 보인다.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.176-182
• /
• 2010

This paper proposes that an inverse class-E amplifier is used a tunable parallel resonator at output port in order to maintain a high power-added efficiency(PAE) and output power with wide frequency ranges. A tunable circuit has a constant Q factor at operating frequency ranges and because of using varactor diode, the inductor and capacitor values of resonator can be changed. Also, the inductance value for zero-current switching (ZCS) is implemented a lumped element and the capacitance value is made a distributed element for phase compensation. The inverse class E amplifier using tunable parallel resonator is obtained to deliver 25dBm output power and achieve maximum power added efficiency(PAE) of 75% at 65-120MHz frequency ranges.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.358-364
• /
• 2009

This paper shows some variable bias techniques which can improve the power added efficiency(PAE) for the designed power amplifier. Some simulations have been done to get the effect of the bias change, and variable bias is adopted to get the higher efficiency for dual mode amplifier which generates two different output power levels. With drain bias change and a fixed gate bias, the amplifier shows PAE improvement compared to the fixed bias amplifier. In addition, this paper analyzed nonlinear distortion of the power amplifier and has used the digital predistortion which can result in 10dB ACPR improvement for the dual band amplifier.