• Journal of Korean Society of Forest Science
• /
• v.23 no.1
• /
• pp.45-48
• /
• 1974

결론적(結論的)으로 목재공업(木材工業)은 분산형태(分散形態)로 폐재(廢材)의 수집(收集) 및 그 종류(種類)도 다양(多樣)하므로서 자원화(資源化)로는 원료(原料)의 제약(制約), 생산규모(生産規模), 생산시(生産時)의 공해발생(公害發生), 제품의 수요 등 유동적(流動的)이며 상대적(相對的)인 가변인자(可變因子)가 많다. 그럴수록 그 특성(特性)을 충분(充分)히 살리는 집약적(集約的)이며 다변적(多邊的)인 이용(利用)을 꾀하면서 최신(最新)의 가공기술(加工技術)과 시설(施設)의 도입(導入)을 검토(檢討)하며 그의 연구지원(硏究支援)도 뒤따라야 하겠다.

• Journal of Korean Institute of Industrial Engineers
• /
• v.13 no.2
• /
• pp.9-16
• /
• 1987

This paper develops an optimal manpower scheduling algorithm that gives an optimal workforce size and day-off scheduling required to satisfy following conditions. First, everyone is to have two consecutive day-off per cycle in a continuous operating environment. Second, everyone is to have at least A weekends off in a cycle of B Weeks. The model addressed is under the circumstance that the demands can vary from day to day in a weekly cycle. The proposed algorithm makes it possible to minimize the maximum workstretch and to maximize the number of weekends off. It is also possible to minimize the variance of idle manpower distribution in order that idle manpower may be utilized in case of emergency.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.386-389
• /
• 2008

낮은 처리속도와 기억용량을 가진 임베디드 센서 네트워크의 소프트웨어를 개발할 때 Tiny OS는 컴포넌트방식의 nesC 언어를 이용하여 효율적인 설계를 돕는다. 컴포넌트 방식을 이용하기 때문에 여러가지 소프트웨어의 개발에 자주 사용되는 자산을 분리하여 관리한다면 개발시간과 비용을 절감할 수 있다. 본 논문에서는 Tiny OS 기반에서 임베디드 센서 네트워크 소프트웨어 개발 시 프로덕트라인 방법을 적용하여 공통적인 자산과 가변적인 자산을 구별하고 재사용성을 높이며 개발 효율을 증대하는 방안을 제시한다. 이러한 연구는 이종의 임베디드 소프트웨어 개발에도 적용되어 늘어나는 임베디드 소프트웨어의 양적, 질적 수요를 충족시켜주는데 도움이 될 것이다.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.113-122
• /
• 2008

This study extended Park et al.(2007c), which analyzed the efficiency of a hierarchical transit network, showed the result of a real data, and analyzed its applicability. Operating cost was estimated using a model which was established in this study, and minimum transit demand was derived from the operating cost. The minimum transit demand value is just a sample calculation, thus it varies by many inside and outside factors of the model. Looking at the inside of the model, operating cost and travel speed are major factors, and the possibility of introducing urban subway becomes high when the operating cost of the transit system is low and its travel speed is high. As far as the outside factors are concerned, according to the analysis on the network structure, transit demand, and transit mode share, the minimum transit demand value which was derived in this study will be the maximum value among the possible values. In the feasibility study, the benefit is likely to be overestimated and the cost is likely to be underestimated than those of this study. It could be concluded that the methodology of a feasibility study is appropriate in the field standard. This study analyzed the efficiency of introduction of urban subway using analytical approach, thus has many shortcomings and limitations. However the practical approach, like feasibility study, has some limitations as well. This study could be a basis on establishing an analysis framework that is more accurate and reasonable by comparing analytical approach and practical approach.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.241-241
• /
• 2016

반도체 선폭이 20 nm급까지 감소함에 따라 기존에 수율에 문제를 끼치던 공정 외부 유입 입자뿐만 아니라, 공정 도중에 발생하는 수~수십 나노의 작은 입자도 수율에 악영향을 끼치게 되었다. 이에 따라 저압, 극청정 조건에서 진행되는 공정 중 발생하는 입자를 실시간으로 모니터링 할 수 있는 장비에 대한 수요가 발생하고 있다. Particle beam mass spectrometer (PBMS)는 이러한 요구사항을 만족할 수 있는 장비로 100 mtorr의 공정 조건에서 5 nm 이상의 입자의 직경별 수농도를 측정할 수 있는 장비이다. PBMS로 입자의 수농도를 측정하기 위해서는 PBMS 전단에서 입자를 중앙으로 집속할 필요가 있다. 공기역학렌즈는 PBMS 전단에서 입자를 집속시키기 위해 일반적으로 널리 사용되고 있는 장비로 여러 개의 오리피스로 이루어져 있다. 공기역학렌즈를 지나는 수송 유체와 입자는 이러한 연속 오리피스를 거치면서 팽창과 수축을 반복하며, 관성력의 차이로 인해 입자가 중앙으로 집속된다. 그러나 기존 공기역학렌즈는 고정된 직경의 오리피스를 사용하기 때문에 설계된 공정조건 이외에는 입자의 집속효율이 감소한다는 단점을 지닌다. 따라서 공정조건이 바뀔 경우 공기역학렌즈를 교체해야 되며, 진공이라는 환경하에서 이러한 교체는 많은 시간과 노력을 요구로 한다. 본 연구에서는 이러한 공기역학렌즈의 문제점을 해결하기 위해 다양한 공정조건에서 교체 없이 사용할 수 있는 새로운 형태의 직경 가변형 공기역학렌즈인 조리개형 공기역학렌즈를 제안하였다. 기존 연구를 통해 조리개형 공기 역학 렌즈가 다양한 압력 범위 내에서 나노입자를 성공적으로 집속할 수 있음을 보였지만, 장비를 상용화하기 위해서는 사용자가 좀 더 쉽게 렌즈직경을 결정 할 수 있어야 한다. 이에 본 연구에서는 조리개형 렌즈의 중공 직경에 따른 입자 집속 특성을 평가하였으며, 최종적으로 압력과 집속하고자 하는 직경에 따라 렌즈 중공 직경을 결정할 수 있게 해주는 데이터 베이스를 제작하였다.

• Journal of the Korean housing association
• /
• v.26 no.6
• /
• pp.191-198
• /
• 2015

The domestic housing paradigm has changed from quantitative growth to qualitative growth, and demands for pleasant living environment and meeting basic living conditions have increased due to increased living standards of the people. In a related move, the Ministry of land, Infrastructure and Transport introduced "long-life housing construction standards" in the Article 21 paragraph 6 of the Housing Act through a revision of the Housing Act in December 2014, devised detailed criteria and enforced the Ministry of Land, Infrastructure and Transport, titled "long-life housing construction certification standards" which require long-life housing certification in construction of apartment houses that accommodate more than 1,000 households. In this regard, A survey of consumers was conducted to collect opinions about consumers' perception and requirements regarding long-life housing, and thus to promote long-life housing and improve certification system criteria. The general public who wish to purchase housing were selected as the subjects for the present study, and the survey was conducted at the site of apartment house PR hall in Seoul and Gyeonggi-do as of January 2015. The result of this study is an opinion survey of long-life housing consumers. For future work, additional research is needed to establish legal standards and devise support systems, along with technology development for long-life housing.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.81-86
• /
• 2014

A smart phone subscriber needs wide bandwidth services for more fast data communication on the internet. The conventional MIMO system is now developing to resolve these problems with limited device space for antenna and frequency band environment reserved. One of way to make it practically is to add the number of antennas theoretically. But it is difficult to increase the antenna element as a limited space on the system. Therefore an active beam forming scheme is known as a way of constructing a Compact MIMO system for that. In this paper, the fast switching control block was suggested to adjust a reactance of the antenna element and verified experimentally the effects by switching signal on an orthogonal beam forming through a spatial domain.

• Environmental and Resource Economics Review
• /
• v.25 no.2
• /
• pp.199-228
• /
• 2016

This study investigates the effects of economic factors and forest environments on rural residential area development in seven north central states of the U.S. by focusing on the relative importance of not only economic factors but also forest environments by forest type as core drivers of residential development. An empirical model of locations and magnitudes of population changes since 1950 in the north central region is first constructed, and then a panel model with fixed effects for counties is used to explain population growth by age group over time at the county level. Then a set of three equations is estimated for three major age groups, and a cross-sectional model is estimated for the last time period that regresses county-level environmental amenity variables on fixed effects coefficients for counties. Finally, an equation explaining changes in rural housing density is estimated. The results imply that immigrant age is a key factor influencing the choice of the place of residence and that the effects of environmental amenity factors on population growth and subsequent housing development in a county vary according to the age group.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.617-631
• /
• 2019

In the four-step demand model, a gravity mode is used most commonly at the trip distribution stage. The purpose of this study was to develop a new friction factor that can express the accessibility property as a single friction factor to compensate for the variable limits of the gravity model parameters (travel time, travel cost). To derive a new friction factor, a new friction factor was derived using the space syntax that can quantify the characteristics of the urban space structure, deriving the link-unit integration degree and then using the travel time and travel distance relationship. Calibration of the derived friction factor resulted in a similar level to that of the existing friction factor. As a result of verifying the various indicators, the explanatory power was found to be excellent in the short - and long - distance range. Therefore, it is possible to derive and apply the new friction factor using the integration index, which can complement the accessibility beyond the limit of the existing shortest distance, and it is believed to be more advantageous in future utilization.

• Journal of the Korea Computer Graphics Society
• /
• v.15 no.3
• /
• pp.1-9
• /
• 2009

Traditional computer simulation uses only traditional input and output devices. With the recent emergence of haptic techniques, which can give users kinetic and tactile feedback, the field of computer simulation is diversifying. In particular, as the virtual-reality-based surgical simulation has been recognized as an effective training tool in medical education, the practical virtual simulation of surgery becomes a stimulating new research area. The surgical simulation framework should represent the realistic properties of human organ for the high immersion of a user interaction with a virtual object. The framework should make proper both haptic and visual feedback for high immersed virtual environment. However, one model may not be suitable to simulate both haptic and visual feedback because the perceptive channels of two feedbacks are different from each other and the system requirements are also different. Therefore, we separated two models to simulate haptic and visual feedback independently but at the same time. We propose an adaptive mass-spring method as a multi-modal simulation technique to synchronize those two separated models and present a framework for a dual model of simulation that can realistically simulate the behavior of the soft, pliable human body, along with haptic feedback from the user's interaction.