• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.155-167
• /
• 2008

This paper studies a multiple user class variable demand user equilibrium and system optimal condition, and then establishes solution algorithms for them. The traffic network equilibrium is accomplished with basis on following assumptions. For considering heterogeneous road user, several user classes have discrete set of VOTs and the travel demand of each user classes varies according to generalized travel cost. this paper specifically investigates following question on multi-class variable demand: Are user equilibrium flows pattern dependent on the unit (time or money) perceived by road user classes? What is system optimal condition according to the unit used in measuring the travel cost or disutility? Finally, using this network equilibrium condition, The traffic assignment algorithm of each equilibrium condition are established.

• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.89-99
• /
• 2001

The conventional studies on equilibrium network design problem(ENDP) with fixed travel demand models assume that the future OD travel demand might not be changed even if the structure and the capacity of the network are improved. But this fixed demand assumption may loose its validity in the long-range network design because OD travel demand actually shifts with the network service level. Thus, it is desirable to involve the variable travel demand which is determined endogenously in the model in the optimal network design. In this paper a hi-level model formulation and solution procedure for ENDP with variable travel demand are presented. Firstly It is considered how to measure the net user benefits to be derived from the improved in link capacities, and the equilibrium network design problem considered here is to maximize the increase of net user benefit which results from a set of lift capacity enhancements within the budget constraints, while the OD travel demands and link travel times are obtained by solving the lower level network equilibrium problem with variable demand. And secondly sensitivity analysis is carried out to find the links to which the network equilibrium flow pattern is the most sensitive. Finally numerical example with simple network is carried out to test the validity of the model.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.81-88
• /
• 2008

This paper presents the travel demand estimation using interval estimation methods during the trip generation stage, and then followed the other three stages of the four stage trip estimation. We have used real data of Dae-jun City. To estimate travel demand using the interval estimation method, a reliability level was set to 95% by a upper bound value, a middle value and a lower bound value. The four stage traffic demand analysis procedure was equally applied and finally interval traffic was estimated. The result showed a difference between maximum values and middle values depending on the destination during the trip generation stage. It depends on an explanation ability of regression analysis. Most of interval estimation ratio resulted in the traffic assignment stage showed ${\pm}5{\sim}18%$ difference on the average and ${\pm}30{\sim}50%$ at the most.

• 전기의세계
• /
• v.44 no.6
• /
• pp.27-36
• /
• 1995

인구증가와 경제성장 및 문화발전에 수반하여 전력수요는 증가되고 사용시간과 장소가 집중되는 경향이다. 따라서 계절별, 일형별, 시간별, 지역별로 부하차이가 심해지고 부하율이 저하한다. 종래와 같이 예측되는 전력수요 곡선을 왜곡(distortion)시키지 않고 그대로 충족시킬 수 있는 설비를 계획하고 건설하여 운용하는 공급관리(SSM:Supply Side Management)에 의존할 때는 설비증설과 투자비가 증가하고 설비이용율이 저하하며 운전유지비가 증가하여 전력단가가 높아진다. 뿐만 아니라 지구환경을 해롭게 하는 CO$_{2}$ 배출량이 증가한다. 이러한 실저에서 설비투자비와 운전유지비를 절감하고 환경보전을 하기 위하여 수요곡선의 모양을 개선하도록 유도할 필요가 있다. 최근 세계적 추세는 부하관리와 효율향상 등으로 수요곡선 모양을 개선하는 수요관리(DSM:Demand-Side Management)에 치중하고 있다. 여기서는 전력수요고나리의 효과적 방법으로서 이른바 원격부하제어(RLC: Remote Load Control), 일명 직접부하제어(Direct Load Control)시스템으 개발기술을 검토한다. 개발코자 하는 RLC시스템은 일시정지시켜도 지장이 적은 수용가의 부하를 주기적으로 공급자가 제어할 수 있도록 하여 가변부하조성(Flexible Load Shape)을 하는 것이다. 가변부하조성은 필요시 운전예비율을 공급자와 수요자가 분담함으로서 전력수급의 안정을 도모하고 사회적 공급 지장비용을 경감시킬 수 있다.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.153-161
• /
• 2002

다사용자계층 통행배정(Multiple User Class Assignment) 문제란 교통망을 이용하는 통행자들이 이질적인 통행계층으로 구성된 경우, 이들 각 계층의 통행수요를 교통망에 배정하는 문제를 의미한다. 이는 기존 통행 배정모형들이 모든 통행자의 통행특성이 동질적이라고 가정함으로서 발생하는 불합리한 통행배정 결과를 완화시키기 위한 방법이다. 또한, 최근 지능형교통체계(Intelligent Transportation Systems, ITS)사업에서 교통정보제공시스템이 구현될 예정임에 따라, 교통정보를 제공받는 계층과 그렇지 못한 계층간의 영향을 분석하거나 혼잡통행료부과 등과 같은 교통관리전략을 정확히 평가하기 위해서 다사용자계층 통행배정모형에 대한 관심이 증가하고 있다. 그러나, 다사용자계층 통행배정모형의 경우, 사용자간의 상호영향으로 통행비용함수의 1차 편미분행렬(Jacobian matrix)이 비대칭(Asymmetric)이 되어 동등 수리최소화문제(Equivalency mathematical Minimization program)로 구성할 수 없고 또한 수치적으로 풀기가 어렵다는 문제가 있다. 본 연구는 이런 문제점을 극복할 수 있는 모형식과 알고리듬을 제시코자 한다. 본 연구에서 제시된 모형은 2가지 특징이 있다. 먼저, 각 사용자 계층간의 상호영향을 모형내에 반영하며, 기종점쌍간의 통행시간변화에 따른 수요변화를 고려한다는 점이다. 이를 위하여 변동부등모형(Variational Inequality Model. VI)으로 문제를 구성하며, 이에 대한 해석 알고리듬도 제시한다. 또한, 변동부등모형으로 구축된 다사용자계층 모형이 다사용자계층 균형조건과 동일함을 보여주는 동등성조건(Equivalency condition)도 제시한다.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.99-108
• /
• 2007

This paper presents an elastic demand stochastic user equilibrium traffic assignment that could not be easily tackled. The elastic demand coupled with a travel performance function is known to converge to a supply-demand equilibrium, where a stochastic user equilibrium (SUE) is obtained. SUE is the state in which all equivalent path costs are equal, and thus no user can reduce his perceived travel cost. The elastic demand SUE traffic assignment can be formulated based on a dynamic system, which is a means of describing how one state develops into another state over the course of time. Traditionally it has been used for control engineering, but it is also useful for transportation problems in that it can describe time-variant traffic movements. Through the Lyapunov Function Theorem, the author proves that the model has a stable solution and confirms it with a numerical example.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.147-156
• /
• 2009

We present a methodology for modeling and solving the transit frequency design problem with variable demand. The problem is described as a bi-level model based on a non-cooperative Stackelberg game. The upper-level operator problem is formulated as a non-linear optimization model to minimize net cost, which includes operating cost, travel cost and revenue, with fleet size and frequency constraints. The lower-level user problem is formulated as a capacity-constrained stochastic user equilibrium assignment model with variable demand, considering transfer delay between transit lines. An efficient algorithm is also presented for solving the proposed model. The upper-level model is solved by a gradient projection method, and the lower-level model is solved by an existing iterative balancing method. An application of the proposed model and algorithm is presented using a small test network. The results of this application show that the proposed algorithm converges well to an optimal point. The methodology of this study is expected to contribute to form a theoretical basis for diagnosing the problems of current transit systems and for improving its operational efficiency to increase the demand as well as the level of service.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.169-178
• /
• 2006

Traffic assignment has been used both for predicting travel demands and for evaluating the tools for alleviating congestion on road network in advance. Some assignment models have been proposed such as equivalent mathematical minimization method, variational inequality problem, nonlinear complementary problem and fixed point method, in following the principle of Wardrop (1952) that no driver can not Improve his travel cost by unilaterally changing his route. Recently Jin(2005a) presented a traffic assignment model based on dynamic process. This paper proposes a solution algorithm for the model of Jin and assesses the performances. Compared to the Frank-Wolfe method, which has been wildly used for solving the existing assignment models, the proposed algorithm is expected to be more efficient because it does not need to evaluate the objective function. Two numerical examples are used for assessing the algorithm, and they show that the algorithm converges to user equilibrium of Wardrop.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.483-488
• /
• 2020

In recent years, the demand for wireless devices incorporating several wireless communication systems into one has been increasing in order to provide services that meet the diverse needs of consumers. Wireless devices consisting of various wireless communication systems require many frequency fixed filters. A frequency tunable filter can replace a number of frequency fixed filters in the wireless devices. If a frequency tunable filter is used in wireless systems, the system can be configured more efficiently. In this paper, a 3-pole frequency tunable BPF(bandpass filter) operating in the frequency band of 800 ~ 2400MHz is designed. In order to widen the operating frequency band, a tuning screw is designed to have a step and a linear motor is used to facilitate the adjustment of the tuning screw. The implemented frequency tunable BPF operates in the designed frequency range and has the maximum insertion loss of 2.82dB in the channel band and the minimum attenuation of 18.7dB at ± 50MHz frequency offset from the center frequency of the band.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.699-706
• /
• 2015

A previous adapter have a single-ouput, however, a demand of a multi-output adapter increase in the recent industrial site. In order to satisfy the demand, in this research, we implement a programmable high efficiency multi-output adapter. The basic structure of the adapter introduced in this paper is a sort of flyback. The way for producing the reference voltage of the adapter proposed is similar to the way in the general flyback implemented with TL431. In addition to the basic concept of the design, however, we introduce a digital variable resistor, AD5246BKSZ10-RL7 and a microcontroller for changing a programmable multi-output. It makes output be variable that the digital variable resistor change the reference voltage of the adapter by order of the microcontroller. The adapter output voltage is controllable in the range of 20V by the user, and the power efficiency is proven to be 85%.