• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.673-683
• /
• 2008

This study improved the existing method of using the longitudinal strain and concept of influence line to develop Bridge Weigh-in-Motion system without axle detector using the dynamic strain of the bridge girders and concrete slab. This paper first describes the considered algorithms of extracting passing vehicle information from the dynamic strain signal measured at the bridge slab, girders, and cross beams. Two different analysis methods of 1) influence line method, and 2) neural network method are considered, and parameter study of measurement locations is also performed. Then the procedures and the results of field tests are described. The field tests are performed to acquire training sets and test sets for neural networks, and also to verify and compare performances of the considered algorithms. Finally, comparison between the results of different algorithms and discussions are followed. For a PSC I-girder bridge, vehicle weight can be calculated within a reasonable error range using the dynamic strain gauge installed on the girders. The passing lane and passing speed of the vehicle can be accurately estimated using the strain signal from the concrete slab. The passing speed and peak duration were added to the input variables to reflect the influence of the dynamic interaction between the bridge and vehicles, and impact of the distance between axles, respectively; thus improving the accuracy of the weight calculation.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.135-147
• /
• 2008

One of the efforts both to prevent urban sprawling development patterns and to promote use of public transportation is known as Transit-Oriented Development (TOD), including such planning elements as the density and diversity of land use and pedestrian-friendly urban design around a transit center. The aim of this study is thus to conduct impact analyses of TOD planning elements on transit ridership in the Seoul rail station areas. First, the authors investigate and draw out various actual elements of TOD planning by using GIS-based data and Smart Card data. Then the authors analyze impacts of TOD planning elements on transit ridership for the Seoul rail station areas. After condensing 34 variables presumably influencing transit ridership into seven factors by using factor analyses, the study utilizes multiple regression modeling methods to identify their impacts on transit ridership. The analysis results demonstrate that transit ridership tends to increase more in rail station areas where there is a non-residential high density, mixed use of land and narrow and small-size road network patterns. The implementation of TODs should be a useful method in inducing a Transit-Oriented City through redevelopment and new development.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.113-128
• /
• 2005

We propose a modified version of 'a Lazy Version of Eppstein's k shortest paths Algorithm(LVEA)' which can find the k shortest paths in total time O(m+ n log n+ K log K) in the worst-case. The algorithm we propose, since the Link repeated paths are all eliminated when enumerating k shortest paths, is No link repeated paths algorithm that is suitable in a transportation network.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.35-47
• /
• 2005

This paper is to review a literature concerning Bus Transit Route Network Design(BTRNDP), to describe a future study direction for a systematic application for the BTRNDP. Since a bus transit uses a fixed route, schedule, stop, therefore an approach methodology is different from that of auto network design problem. An approach methodology for BTRNDP is classified by 8 categories: manual & guideline, market analysis, system analytic model. heuristic model. hybrid model. experienced-based model. simulation-based model. mathematical optimization model. In most previous BTRNDP, objective function is to minimize user and operator costs, and constraints on the total operator cost, fleet size and service frequency are common to several previous approach. Transit trip assignment mostly use multi-path trip assignment. Since the search for optimal solution from a large search space of BTRNDP made up by all possible solutions, the mixed combinatorial problem are usually NP-hard. Therefore, previous researches for the BTRNDP use a sequential design process, which is composed of several design steps as follows: the generation of a candidate route set, the route analysis and evaluation process, the selection process of a optimal route set Future study will focus on a development of detailed OD trip table based on bus stop, systematic transit route network evaluation model. updated transit trip assignment technique and advanced solution search algorithm for BTRNDP.

• Journal of Korean Society of Transportation
• /
• v.31 no.4
• /
• pp.3-17
• /
• 2013

The purpose of this study is to develop a traffic assignment model where the variable of signal intersection delay is taken into account in assigning traffic in large-scale network settings. Indeed, despite the fact that the majority of the increase in travel time or cost involving congested urban network or interrupted flow are accounted for by stop delays or congested delays at signal intersections, the existing traffic assignment models did not reflect this. The traffic assignment model considering intersection delays presented in this study was built based on the existing traffic assignment models, which were added to by the analysis technique for the computation of intersection delay provided in Korea Highway Capacity Manual. We can conclude that a multiple variety of simulation tests prove that this model can be applied to real network settings. Accordingly, this model shows the possibility of utilizing a model considering intersection delay for traffic policy decisions through analysis of effects of changes in traffic facilities on large urban areas.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.40-45
• /
• 1998

본 연구에서는 현장 작업자 개인이 느끼는 심리/환경적 부하를 정량적으로 파악할 수 있는 척도를 개발하였다. 이러한 척도는 현장의 중간관리자들이 간단한 기구와 직접 관찰을 통해 쉽게 사용할 수 있도록 설계되었다. 심리적 작업부하 측정은 기존 연구와 현장 작업자를 대상으로 한 인터뷰 결과를 바탕으로, 타당도가 높다고 인정되는 심리부하 측정 요소를 결정하였고, 문헌과 모의 검사를 통하여 부 담감이나 편의(bias)를 줄일 수 있도록 문항수 및 어휘를 선택하였으며, 각각의 설문은 다양한 문체 중 가장 신뢰도가 높은 형태를 선정하였다. 환경적 작업부하 측정은 문헌 조사를 통하여 측정을 위한 요소를 결덩하였고, KS 규격을 기존으로 새로운 환경부하 측정 지침서를 개발하였고, 현장 예비조사가 실시되었다. 또한, 환경부하 측정결과를 지수화하기 위한 수리적 모델과, 심리적척도와의 통합을 위 한 수리적 방법론이 제시되었다. 이러한 설문 문항과 환경조사방법은 작업장을 대상으로 적용하여 실 제로 그 효용성 여부를 검토하였다. 연구 결과 이제까지 소홀히 여겨왔던 작업자의 심리적/환경적 부 하를 정량적으로 간편하게 측정할 수 있는 방법이 개발되었고, 정량화한 심리/환경 부하 척도는 이제 까지 주로 조사되었던 생체역학적/생리적 부담도와 더불어 종합적인 작업부하 평가에 일익을 담당할 것으로 예상된다. 또한, 이러한 척도에 의한 결과는 현장 근로자들의 근로여건 개선을 위하여 노/사/ 정부 모두가 만족할 수 있는 객관적 자료로 사용될 수 있으며, 예방차원의 안전관리에도 응용될 수 있 을 것으로 기대한다.구로 신체의 종합적인 만족도, 선호를 취급하고 있을 뿐 신체각 부위의 만족 도나 선호에 관한 자세한 고찰을 하고 있지 않으며 자신의 신체에 대한 인식도 및 실제체형과의 비교는 이루어지고 있지 않다. 이에, 신체 각 부위에 대한 인식도 및 실제 신체 측정치와 만족도와의 관계 및 이상형에 대해 구체적으로 파악할 필요가 있다. 또한, 신체에 대한 이상형은 시대의 여러 여건에 따라서 변화할 수 있으므로 의복 착용자가 의복을 통해서 표현하고자 하는 이상형의 시대적 변화를 살펴볼 필요가 있다. 따라서 본 연구에서는 신체에 대한 인식도 및 만족도, 이상형에 대한 설문지 조사와 신체측정을 통하여 신체 크기에대한 만족도를 객관적인 척도로 고찰하고, 이상형과 실제 체형에 관하여 고찰하고자 한다. 도한, 1992년도 자료와의 비교를 통하여 시대에 따른 신체만족도와 이상형의 변화를 파악하고자 한다. 이를 기초로 한 의복원형 제작 및 의복 디자인에 대한 연구를 통해 의복의 맞음새가 좋을뿐만 아니라 의복착용자들 에게 심리적 만족을 줄 수 있는 의복 제작에 도움이 될 수 있을 것이다.적입지로 분석되었다.등 다양한 모형들을 고려해 본 뒤, 적절한 모형을 적용할 것이다. 가로망 설계 모형에서 신호제어를 고려하기 위해서는 주어진 가로망에 대한 통행 배정과정에서 고려되는 통행시간을 링크통행시간과 교차로 지체시간을 동시에 고려해야 하는데, 이러한 문제의 해결을 위해서 최근 활발히 논의되고 있는 교차로에서의 신호제어에 대응하는 통행배정 모형을 도입하여 고려하고자 한다. 이를 위해서 지금까지 연구되어온 Global

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.131-144
• /
• 1997

Traffic jam densified day by day is phenomenon to occur lack of the road capacity in comparison with traffic density, but lack of the road cannot be concluded by main cause of traffic ism. Because the central function of a city would be concentrated upon the downtown and traffic demand would not be evenly distributed by the classification of an hour. Therefore, this study based on the fact that each driver will select the route generating traffic delay very low when path choice from origin to destination in travel plan estimating the quality of passage could be maintained the speed he want will approach to a characteristic grasp of a road, traffic, driver changing every moment by traffic-demand of road increased as a geometrical series with analysis a classification of a street, a intersection along the path on traffic density and highway capacity analysis the path using GIS techniques about complex street network, also will get the path of actual optimum for traffic delay trend creating under various condition the classification per a hour, a day of week and an incident through network such as analysis for traffic generation zone adjacent about street, intersection, afterward will expect the result increasing efficiency of the road-use through a good distribution of traffic by optimum-path choice, accordingly will prepare the scientific, objective, appropriate basis to decide the reasonable time of a road-widen and expansion through section analysis along a rate of traffic volume vs. road capacity.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.69-78
• /
• 1999

This paper defines the reliable based route choice Principle and formulates the reliability based equilibrium traffic assignment using the Principle. The reliability is defined as the difference of travel demand and capacity using the interference theory of the system engineering. An efficient solution a1gorithm based on Frank-Wo1fe algolithm is Presented to calculate and compare the reliability based traffic assignment with conventional travel time based assignment using small and large scaled road networks. The results show that reliability based traffic assignment converges to equilibrium solution in a reasonable computing time. The equilibrium link flows between reliability and travel time based traffic assignment differ each other in the sense that reliability based assignment is assigned based on the maximum difference of travel demand and link capacity whilst travel time based is assigned on the shortest travel time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6A
• /
• pp.799-808
• /
• 2008

The analysis of vehicular loads reflecting the domestic traffic circumstances is necessary for the development of adequate design live load models in the analysis and design of cable-supported bridges or the development of fatigue load models to predict the remaining lifespan of the bridges. This study intends to develop an ANN(artificial neural network)-based Bridge WIM system and Influence line-based Bridge WIM system for obtaining information concerning the loads conditions of vehicles crossing bridge structures by exploiting the signals measured by strain gauges installed at the bottom surface of the bridge superstructure. This study relies on experimental data corresponding to the travelling of hundreds of random vehicles rather than on theoretical data generated through numerical simulations to secure data sets for the training and test of the ANN. In addition, data acquired from 3 types of vehicles weighed statically at measurement station and then crossing the bridge repeatedly are also exploited to examine the accuracy of the trained ANN. The results obtained through the proposed ANN-based analysis method, the influence line analysis method considering the local behavior of the bridge are compared for an example cable-stayed bridge. In view of the results related to the cable-stayed bridge, the cross beam ANN analysis method appears to provide more remarkable load analysis results than the cross beam influence line method.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.58-61
• /
• 2010

스마트그리드는 Modern Grid Initiative와 미국 에너지성인 DOE(Department of Energy)에 의하여 정의된 것으로서 기본적으로 "발전, 송전, 배전 및 수용가로부터 발생하는 수많은 혁신적인 신규기술 및 설비들을 통합할 수 있는 망"을 의미한다. 본 연구에서는 최근의 연구동향을 분석하여, 장래의 스마트그리드의 전개방향을 제시하고자 한다. 구체적으로는 하나의 지역(또는 수용가군)을 대상으로 분산전원과 전력저장장치로 구성된 마이크로그리드를 중심으로 정보와 에너지를 감시하고 제어하는 계통을 스마트그리드의 모델로 제시하고자 한다.