• Journal of Korean Society of Steel Construction
• /
• v.17 no.5 s.78
• /
• pp.637-648
• /
• 2005

Innovative prestressed steel plate girders were presented in this study. Hot-rolled H beams were loaded first, then relatively high-strengthsteel plates were welded on the top and bottom flanges of preloaded H beams. Finally, high prestressed plate (HiPP) girder was manufactured by simply releasing prestresses of rolled beams. To verify prestress distributions induced in this girder, the experimental study was conducted and some guidelines to manufacture these girders effectively were addressed. In addition, methods to determine the allowable bending stress of HiPP girders and to check welding stresses were addressed for design of temporary bridges. The efficiency and effectiveness of the present girder were demonstrated through design examples of temporary bridges adapting the prestress-induced girder or the plate girder of the same section without prestresses. As a result, it has been found to be possible that the span length of HiPP girders for temporary bridges is longer than that of girders without prestresses.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.30-30
• /
• 2011

산업화 과정에 방출된 할로겐 화합물 및 프레온 가스가 오존층을 파괴하면서 많은 양의 자외선이 지표에 도달하여 생태계에 적지 않은 영향을 끼치고 있다. 자외선은 살균, 소독작용 및 Vitamin D 합성을 위해 생명체에 필수적이지만 과다할 경우 색소침착, 피부노화, 피부암 발생, 백내장의 증가, 면역기능저하 등의 피해를 준다. 자외선은 파장 영역에 따라 UV-A(장파장 자외선), UV-B(중파장 자외선)및 UV-C(단파장 자외선)으로 나뉜다. 이 중 인체에 가장 유해한 것으로 알려진 단파장의 UV-C는 파장이 짧아 침투력이 미약해 오존층과 성층권에서 대부분 흡수되므로 생물학적으로 큰 의미는 없다. 그러나 자외선 중 UV-B와 UV-A 영역의 자외선은 인체에 영향을 가장 많이 미치므로 이들 영역의 자외선을 차단하는 것이 필요하다. Vitamin C는 아스코르브산(ascorbic acid)이라고도 불리며 미백효과, 주름 개선, 자외선 차단 및 항산화 작용을 하지만 섬유가공 시 Vitamin C는 쉽게 산화되며 세탁 내구성이 떨어지기 때문에 가교제를 필요로 한다. Vitamin C를 이용하여 자외선 차단성 섬유제품을 개발하기 위해, 포름알데히드를 유리하지 않는 폴리카르복시산 가교제 중 하나인 Citric Acid(CA)를 사용하여 고온에서 면직물에 처리했을 때 에스테르 형 가교를 형성하여 내세탁성을 가질 수 있었다. 자외선 차단 효과를 알아보기 위하여 KS K 0850 섬유제품의 자외선 차단율 및 차단지수 시험방법으로 평가하였다.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.802-807
• /
• 2015

In this study, we synthesized a new biocatalyst consisting of glucose oxidase (GOx), polyethyleneimine (PEI) and carbon nanotube (CNT) with addition of terephthalaldehyde (TPA) (TPA/GOx/PEI/CNT) for fabrication of glucose sensor that shows improved sensing ability and stability compared with that using other biocatalysts. Main bonding of the new TPA/GOx/PEI/CNT catalyst is formed by Aldol condensation reaction of functional end groups between GOx/PEI and TPA. Such formed bonding structure promotes oxidation reaction of glucose. Catalytic activity of TPA/GOx/PEI/CNT is evaluated quantitatively by electrochemical measurements. As a result of that, large sensitivity value of $41{\mu}Acm^{-2}mM^{-1}$ is gained. Regarding biosensor stability of TPA/GOx/PEI/CNT catalyst, covalent bonding formed between GOx/PEI and TPA prevents GOx molecules from becoming leaching-out and contributes improvement in biosensor stability. With estimation of the biosensor stability, it is found that the TPA/GOx/PEI/CNT catalyst keeps 94.6% of its initial activity even after three weeks.

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.18-23
• /
• 2013

Nylon 12 elastomer was slightly crosslinked in molten state by the addition of small amount of dicumyl peroxide (DCP) as a crosslink agent and triallycyanuate (TAC) as a co-agent during melt compounding at $160^{\circ}C$ in an internal mixer. The effect of the peroxide crosslinking on mechanical, dynamic mechanical and rheological properties of the nylon 12 elastomer was investigated by means of tensile testing, dynamic mechanical analysis (DMA) and small amplitude oscillating rheometer, respectively. With modification, there is an improvement in tensile modulus and Young's modulus with decease in elongation at break. DMA results for peroxide modified nylon 12 elastomers demonstrated that the glass transiaiton temperature of PTMG segment shifted to higher temperature and the storage modulus remained constant above the melting temperature of nylon 12 segments. Melt rheological studies revealed that the peroxide modified nylon 12 elastomer exhibited a more solid like behavior and stronger shear thinning behavior compared to neat nylon 12 elastomer, which was more prominent at higher TAC content in the polymer matrix. The peroxide modified nylon 12 elastomer exhibited good elastic recoverability and improved mechanical properties without sacrificing melt processibilty, and especially the service temperature range increased as compared to neat nylon 12 elastomer.

• Journal of Adhesion and Interface
• /
• v.12 no.2
• /
• pp.73-80
• /
• 2011

In order to develop the environmental-friendly new materials based on soybean protein which is plantable macromolecule, thermal characteristics of the soybean protein resin (SPI) modified by plasticizers (1,3-propandiol, glycerol) and cross linking agents (glutaraldehyde, epichlorohydrin, glyoxal, urea) were analyzed by TGA. Mechanical properties of modified SPI were investigated and fracture was observed by SEM. As the result, flexibility of SPI film was increased by adding plasticizers; 1,3-propandiol and glycerol. Plasticization effect of glycerol was relatively greater than that of 1,3-propandiol. With the application of crosslinking agents (glycerol, epichlorohydrin and glyoxal), strength and thermal stability of SPI increased with their content. On the other hand, in case of addition of urea, thermal stability of SPI decreased and its strength was reduced because cross-linking between urea and SPI was somewhat difficult. Fracture surfaces and domain interfaces of the modified SPI resins were observed with SEM.

• 대한임상약리학회:학술대회논문집
• /
• 2002.12a
• /
• pp.3-4
• /
• 2002

• Elastomers and Composites
• /
• v.14 no.3
• /
• pp.161-168
• /
• 1979

이 논문(論文)의 목적(目的)은 열적안정성(熱的安定性) 및 내노화성면(耐老化性面)에 있어서 디엔제3성분단위체(第三成分單位體)(diene termonomer)의 각각(各各)의 종류(種類)가 EPDM의 중합체(重合體)의 성질(性質)에 미치는 효과(效果)를 구명(究明)하는데 있다. 제3성분단위체(第三成分單位體) 5종(種)으로 각각(各各) 다음과 같다. 즉, ethylidene norbonene(ENB), butadiene(BD), dicyclopentadiene(DCPD), methyltetrahydroindene (MTHI) 및 1,4-hexadiene(HD)이다. 이들을 써서 만든 각각(各各)의 EPDM은 동(同)몰의 불포화도(不飽和度)로 만들어졌다. 또한 가황계(加黃系)는 동일(同一)한 황/촉진제계(黃/促進劑系)를 사용(使用)하였다. ENB-EPDM이 순(純)고무배합체(配合體) 및 충전제함유배합체(充塡劑含有配合體)의 가황(加黃)에 있어서 모두 함께 가장 빠른 가황속도(加黃速度)를 보였다. HD-EPDM은 순(純)고무배합체(配合體)에서 가황속도(加黃速度)가 가장느렸으나 충전제함유배합물(充塡劑含有配合物)에서는 DCPD-EPDM보다는 발랐다. BD-EPDM을 제외(除外)한 이들 중합체(重合禮)는 거의 같은 초기가교밀도(初期架橋密度)를 갖는다. 가교밀도(架橋密度) 및 가교형(架橋型)을 분석(分析)하여 보면 BD-EPDM 쇄(鎖)에서 부타디엔 단위(單位)는 블럭을 이루고 있다. 또한 HD-EPDM은 순(純)고무가황체(加黃體) 및 충전제배합가황체(充塡劑配合加黃體)에 있어서 원가교결합(原架橋結合)의 50%가 monosulfide의 구조(構造)를 가지고있다. 이외(外)의 4종(四種)의 EPDM 폴리머는 보다 낮은 monosulfide구조를 가진다. $177^{\circ}C(350^{\circ}F)$의 노화온도(老化溫度)에서 ENB 및 HD폴리머는 약(約) 65% monosulfide 가교(架橋) 및 거의 동일(同一)한 파괴에너지값$(E_b)$을 가진다. 그러나 1,4HD의 원가교(原架橋)의 monosulfide 구조함량(含量)이 보다 높다고 해서 그의 내노화성(耐老化性)이 다른 폴리머보다 더 좋다고는 생각되지 않는다. DCPD는 $177^{\circ}C(350^{\circ}F)$의 노화온도(老化溫度)에서 똑같은 monosulfide가교(架橋)를 가지나 노화온도(老化溫度)가 $259^{\circ}C(500^{\circ}F)$로 높아짐에 따라 monosulfide 함량(含量)도 증가(增加)한다. $550^{\circ}F(287.7^{\circ}C)$의 노화온도(老化溫度)에서는 EPDM폴리머의 모든 가교(架橋)가 monosulfide구조가 되나 전가교밀도(全架橋密度) 및 $E_b$ (신장률(伸長率), 절단시(切斷時)의)는 대단(大端)히 낮은 것으로 나타나는데 이것은 산화(酸化)에 의한 노화(劣化)에 기인(基因)되는 것으로 보인다. 질소기류(窒素氣流)속에서의 TGA의 분석결과(分析結果)를 보면 EPDM 가황체(加黃體)는 $800\sim935^{\circ}F(427\sim502^{\circ}C)$의 온도범위(溫度範圍)에서 분해(分解)되며 공기중(空氣中)에서는 $750\sim935^{\circ}F$ 범위(範圍)에서 분해(分解)한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.157-157
• /
• 2009

다층카본나노튜브(MWCNT) 를 첨가한 전력케이블용 CNT 반도전 컴파운드를 용융혼합법을 사용하여 제조하였다. 카본나노튜브, 카본블랙, 분산제, 가교조제 함량변화에 따른 초고압 CNT 반도전 컴파운드의 특성을 조사하였다. 카본나노튜브 단독, 카본나노튜브와 전도성 카본블랙을 혼용함에 따른 상승효과, 분산제와 가교조제 사용에 따른 초고압 전력케이블용 CNT 반도전 컴파운드의 우수한 물성을 확인할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.6
• /
• pp.783-789
• /
• 2003

An experimental method to investigate the fracture strength and fracture toughness for the silicon nitrides sintered at various sintering temperature is established. The erosion rate for these materials in the various concentration of NaOH solution is also investigated. In result, the fracture strength of Si3N4 is decreased with the increase of sintering temperature. On the other hand, the fracture toughness KIC is increased with the increase of sintering temperature. The erosion rate of silicon nitride in the NaOH solution depend largely on the grain size and the concentration of NaOH solution. The erosion rate of silicon nitride sintered at $1800^{\circ}C$ was much higher than that at $1950^{\circ}C$. These results are due to the unique columnar structure of silicon nitride.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.722-730
• /
• 1994

The effects of antioxidant and carbon black on weatherability of crosslinked polythylene(XLPE) for electrical insulation were investigated. 16 compositions were prepared in other to determine the weathering resistance. Samples were exposed in xenon-arc lamp Weather-Ometer for 500, 1000, 1500, 2000 hours respectively. Tensile strength, elongation at break, dielectric strength and tan ${\delta}$ were measured to evaluate the weatherability of XLPE. The results indicated that the effect of carbon black was more prominent than antioxidant and synergistic effect, was observed when two additives were mixed.