• 한국공작기계학회논문집
• /
• 제13권5호
• /
• pp.62-66
• /
• 2004

A study for investigating the effects of the cutting conditions(feed rate, radial depth of cut, cutting speed) and the tool diameter on the circumferential geometry of the cyl indrically end-mi1led workpiece is described. In this work, the circumferential geometry is characterized by the roundness error. Experimental results show that the circumferential geometry is directly affected by the material removal per tooth,which is defined as a function of the cutting speed, the feed rate and the radial depth of cut. And, the radial depth of cut is revealed to be the most critical condition among them. It is also found that the roundness error decreases when the tool diameter is larger under the same cutting conditions.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.17-24
• /
• 2000

The tensile properties of polyester warp knitted fabrics of satin and reverse satin structure with various lengths of underlap were studied. In the range of low tension, the satin warp knitted fabric showed larger tensile energy and elongation in the direction of $0^\circ$ and larger tensile linearity, tensile resilience and initial modulus in $90^\circ$. Meanwhile, reverse satin one showed larger initial moduli in 0$^{\circ}$ and larger the others in $90^\circ$. In the range of high tension, the tendencies of both fabrics in $0^\circ$ direction were almost the same as those in all direction. As the under laps were shorter for both fabrics, tensile linearity, tensile energy and elongation increased, but tensile resilience decreased in all directions. However initial moduli were changed little.

• 한국염색가공학회지
• /
• 제11권2호
• /
• pp.46-54
• /
• 1999

The conventional dyeing of wool/cotton blends involves a two bath two step method, i.e., after dyeing of the wool component with acid dyes in an acidic dyebath at $100^\circ{C}$, the dyeing of the cotton component with reactive dyes in an alkaline dyebath is performed. In order to overcome the disadvantage of the conventional two bath two step dyeing method of wool/cotton blends, it had prompted significant effort to the development of the one bath dyeing method which can accomplish savings in time, energy and water usage. To improve dyeing property of wool/cotton blends, cotton component was pretreated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. This study was carried out to investigate dyeing possibilities of wool/cationized cotton blends with acid dye/reactive dye by one bath two step method.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.44-51
• /
• 2000

The conventional one bath exhaust dyeing system of nylon]/cotton blends with acid dye/direct dye involves a lot of neutral salt which affect dyeability of acid dyes. Because of conventional one bath exhaust dyeing system of nylonl/cotton blends with acid dye/direct dye needs acid dyes adjusted at a neutral liquor, suitable acid dye is limited. To improve dyeing property of nylon/cotton blends, cotton component was pretreated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. This study was carried out to investigate dyeing possibilities of nylon/cationized cotton blends with acid dye/direct dye in a non-neutral salt dyebath by one bath two step method. The concentration of direct dye was 1.0%, 0.7%, 0.3%o.w.f. respectively at a non, 1%, 3%owf of reserving agent for being almost equal color strength between nylon and 3% cationized cotton when nylon/3% cationized cotton blends was dyed with acid dye/direct dye at concentration of acid dye(1%o.w.f.) by one bath two step method.

• 한국염색가공학회지
• /
• 제10권2호
• /
• pp.18-28
• /
• 1998

in order to overcome disadvantage of the conventional two bath dyeing method of polyester/cotton blends, it had prompted significant effort to the development of the one bath dyeing method which can accomplish sayings in time, energy and water usage. Also, when dyeing polyester/cotton blends by the one bath dyeing method, the high salt concentrations needed for the reactive dye can cause particles of disperse dye, used for the polyester component, to aggregate. A supplementary problem that can occasionally be happened is the change of hue that occurs on dyed polyester in an alkaline dyebath. To improve dyeing property of polyester/cotton blends, cotton component was pretreated with epichlolohydrine-trimethylamine hydrochloride in aqueous solution of sodium hydroxide to produce a cationized cotton that can be dyed under neutral conditions with reactive dye in a non-electrolytic or il little electrolytic dyebath. The one bath dyeing method of polyester/cationized cotton blends with disperse dye/reactive dye mixture resulted in a satisfactory dyeing property and color yield in comparison with ordinary two bath dyeing method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1990년도 춘계학술대회 논문집
• /
• pp.76-82
• /
• 1990

근년에 들어 우리 인류 사회는 우주 개발, 원자력 산업, 일렉트로닉스 산업 분야등에 걸친 눈부신 발전을 이루게 되며서 보다 극한적인 가혹한 환경 조건하에서도 뛰어난 내열성, 내식성, 기계적 강도, 전.자기적 특성등을 가지며 칫수의 정밀도가 좋은 재료를 필수로 하게 되었다. 이에따라 최근 새로이 등장하게 된것이 전기.전자 기능 등의 기능성을 지닌 기능 재료, 내열 구조 재료, 고강도 재료 등으로서 우수한 성능를 갖는 화인 세라믹스인데 이는 요즘 전세계적 으로 미래지향적 고부가가치의 전기.전자 부품, 기계 부품, 광학 부품 및 그 밖의 기타 첨단 산업 분야의 전반에 걸쳐 주목받고 있는 신소재이다. 즉, 종래의 전통적인 세라믹스로서 인식 되어 왔던 세라믹스 재료를 전혀 새로운 생각을 갖고 미래지향적 신소재로 만든 화인 세라믹스 재료가 등장하게 된것이다. 그러나 화인 세라믹스 부품의 제조에 있어서는 소결과정에서의 재료 수축을 피할 수 없는바, 단순 성형, 소결 과정으로만 끝나 실용화되는 제품을 제외한 정밀 기계, 구조용 부품등으로의 활용을 위해선 최종적인 재료의 정도를 내기 위한 기계 제거가공의 후가공 공정을 필수로한다.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.53-61
• /
• 2000

The manufacture of a marine propeller typically requires long lead time to generate 5-axis tool path. Hence it may take several weeks to manufacture a satisfactory propeller with a general purpose CAD/CAM system. In this research a dedicated 5-axis CAD/CAM system for machining marine propellers has been developed, The system employs various methods to enhance the productivity : interference-free tool path generation employing check vectors and optimum cutter size determinants. In addition an iterative NURBS modeling technique is used to improve the accuracy of the modeled surface and effective cutting conditions are determined and recommended empirically to increase the productivity. The proposed CAD/CAM system has been implemented with C++ and OpenGL graphic library on the Windows system. The system validation and sample results are also given and discussed.

• 소성∙가공
• /
• 제15권8호
• /
• pp.581-585
• /
• 2006

Effects of V on both the formation of Ti-Nb-V carbonitrides and mechanical properties of Ti-Nb bearing low carbon HSLA steels were investigated. Hot rolling process was simulated by using Gleeble 3500 system with the steels containing three different levels of V ($0{\sim}0.1wt.%$). Vanadium precipitated as Ti-Nb-V carbonitrides at austenite region but it did not precipitate as VC during austenite to acicular ferrite or bainitic ferrite phase transformation. As V content increased, the amount of Nb precipitates was decreased but the average size of Ti-Nb-V carbonitrides was increased due to larger diffusivity of V than that of Nb. Coarsened Ti-Nb-V carbonitrides could act as heterogeneous nucleation site during ${\gamma}{\rightarrow}{\alpha}$ phase transformation, thus, acicular ferrite transformation was promoted as V content increased, resulting in increase of upper shelf energy.

• 소성∙가공
• /
• 제10권2호
• /
• pp.91-100
• /
• 2001

A sectional FEA program is developed lot analyzing forming processes of sandwich sheets, which are intensively used recently as a lightweight material of an automobile body. The aluminum sandwich sheet consists of two aluminum skins and a polyprophylen core in between. The aluminum sandwich sheet is dominantly effected by the bending effects in small radius of curvature, so that an appropriate description of bending effects is required to analyze the forming processes. For the evaluation of bending effects, the bending equivalent forces are calculated from the bending moment computed using the curvature of the tool and are added to the membrane stretch forces. To verify the validity of the developed program the sectional FEA results in stretch/draw forming Processes of a square cup and draw forming Processes of an outer hood panel were compared with the measurements.

• 소성∙가공
• /
• 제16권1호
• /
• pp.36-41
• /
• 2007

Thermoplastic elastomer(TPE) can be recycled and molded such as commercial thermoplastic. Therefore TPE has being widely applied on automobile, household and etc. in these days. This study shows the variation of mechanical properties and shrinkage on TPE moldings for variation of injection molding conditions such as injection pressure, holding pressure, melt temperature, mold temperature and etc. Mechanical properties in relation to tensile strength, hardness and shrinkage in connection with precision dimension of part are investigated. The tensile strength and shrinkage of the experimental TPEs are mainly influenced by injection pressure and melt temperature. All injection molding conditions scarcely affect on hardness. To verify the variation of tensile strength and shrinkage, morphology of TPE molding was scanned by the SEM. The morphology showed that as the melt temperature increased, the rubber particles on the TPE became smaller and widely were dispersed. This behavior of rubber particles influenced on the increase of tensile strength.