• Title/Summary/Keyword: 가공지선

Search Result 74, Processing Time 0.038 seconds

Lightning Surge Analysis and Configuration Selection of DC Line in Hybrid Distribution Systems (하이브리드 배전계통에서 DC 선로 뇌과전압 해석 및 구성 선정)

  • Son, Yong-Dae;Lee, Jae-Myeong;Ko, Kwang-Man;Chea, Jik-Byoung;Lee, Jong-Beom
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.371-372
    • /
    • 2015
  • 본 논문에서는 DC 배전계통을 도입하는 것을 전제로 기존의 AC 배전선로에 DC 선로를 혼합 설치한 하이브리드 배전계통을 다루었으며 여기서 뇌격이 발생하였을 경우 DC 선로에 유도되는 뇌과전압을 해석하고 그 영향을 평가하고자 한다. 이를 위해 DC 선로의 위치를 3가지 형태로 구분하였으며, 가공지선에 뇌격을 인가하였을 경우 발생하는 DC 선로의 뇌과전압을 해석하여 적절한 DC 선로의 구성도 제안하였다. 모델링 및 분석은 EMTP를 이용하여 실시하였다.

  • PDF

The Design Efforts of Automation Network in Distribution Line using PowerLine Carrier (전력선 통신을 이용한 배전 계통의 전력 자동화 통신망의 설계)

  • Park, Byung-Seok;Ahn, Seung-Kab;Kim, Myong-Soo;Hyun, Duck-Hwa;Cho, Seon-Ku
    • Proceedings of the KIEE Conference
    • /
    • 2002.07d
    • /
    • pp.2767-2769
    • /
    • 2002
  • 최근 전력선통신은 디지털 변복조 기술의 발달에 힘입어 새로이 부각되었다. 대부분의 전력선 통신 기술은 Home Network을 대상으로 하는 저압 220V상의 전력선 통신기술이다. 본 논문에서는 고압 배전 계통에서의 전력자동화 통신망으로 이용될 수 있는 전력선 통신망을 소개하고 그 설계에 대하여 다루었다. 배전 계통은 수십 km에 걸쳐서 제어 노드들이 분포해 있으므로, 설계된 통신망은 고압 가공지선 상에서 동작하는 수십km 정도의 통신망 길이와 수 만개의 노드들을 수용할 수 있도록 하였다. 이를 위하여 고압 커플러, 디지털 변복조부 및 통신 프로토콜을 설계하였다.

  • PDF

Effects of an Overhead Ground Wire and Surge Arrester in the Railway due to Lightning Strokes (전차선로에서의 뇌격에 의한 가공지선과 피뢰기의 차폐효과)

  • Rim, Seong-Jeong;Han, Byung-Duk;Oh, Jung-Hwan;Yun, Sang-Yun;Kim, Jae-Chul;Chung, Yong-Chul
    • Proceedings of the KIEE Conference
    • /
    • 1999.07a
    • /
    • pp.468-470
    • /
    • 1999
  • Using the EMTP(Electro Magnetic Transient Program) for the analysis of lightning direct voltage on the railway system, the shielding effects of overhead grounding wire on the railway were studied quantitatively. Installation of overhead ground wire and sap-type arrester such as s-horn provides a 6.6kV HV distribution line with goof protection effects. Even severe lightning induced voltage were create, 6.6kV HV lines can be withstand.

  • PDF

Analysis of Lightning Overvoltage with Earth of Overhead Grounding Wire and Installation Types of Arrester in Double Circuits Distribution Systems (2회선 배전계통에서 가공지선 접지 및 피뢰기 설치환경에 따른 뇌과전압 해석)

  • Jung, Chae-Kyun;Kim, Sang-Kuk;Lee, Jong-Beom;Jeong, Yeong-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2003.07a
    • /
    • pp.497-499
    • /
    • 2003
  • This paper analyses the lightning overvoltage with earth of grounding wire and installation types of arresters in double circuits distribution systems. First, the model for analysis is selected severer case between upper line and lower line when the direct lightning surge strikes on the overhead grounding wire. The lightning overvoltage is variously calculated with earth distance between overhead grounding wires. This paper also analyses the effect of the installation distance between arrestors and the earth resistance of overhead grounding wire. From these results, authors examine the rationality of BIL that is applied in distribution system.

  • PDF

접지설비

  • 배석명
    • JOURNAL OF ELECTRICAL WORLD
    • /
    • s.335
    • /
    • pp.37-52
    • /
    • 2004
  • 접지설비는 다른 설비에 비해서 단지 부속설비처럼 안이하게 취급하는 경우가 많다. 그러나 접지설비는 전로의 이상전압을 억제하고 지락시의 고장전류를 안전하게 대지로 흘려 인체의 보호나 화재, 기기의 손상 등의 재해를 방지하는 것뿐만 아니라 제어기기를 안정하게 동작시키는 등의 역할을 위한 필수불가결한 설비이다. 특히 최근 전자기기의 급격한 증가에 따라 안정된 신호계를 확보하기 위한 접지설비가 다양화, 혼재화하고 있다. 접지를 하여야 할 설비에는 전력설비, 정보$\cdot$통신설비(신호, 제어, 유무선통신, 컴퓨터 등), 피뢰설비(피뢰침, 피뢰도선, 가공지선 등)를 비롯하여 정전기 제거설비, 유도장해 방지설비 등 여러 가지 설비가 있다. 접지는 기본적으로 대지에 전기적 단자를 접속하는 것으로 즉, 금속 등의 도전성 물체를 대지와 전기적으로 접속하여 도전성물체의 전위를 대지와 같은 전위 또는 전위차를 최소화시키는 것을 말한다. 금속체와 대지를 접속하는 단자의 역학을 하는 것이 접지전극(Grounding electrode)이라고 하며 보통은 지중에 매설되어 있는 도체가 사용된다. 접지전극과 접지를 하는 설비를 연결하는 도선을 접지도선 또는 접지선(Grounding conductor)이라고 한다. 따라서 접지설비를 설계하기 위해서는 접지의 목적, 기능, 종류를 정확하게 이해하여 접지시스템을 구축함과 동시에 적절한 접지개소, 접지선, 접지극을 선정하고 시공하여야 한다.

  • PDF

Analysis of Lightning Overvoltage and Shielding Effect of Arrester and Overhead Grounding Wire on DC Railroad (직류전차선로의 뇌과전압 해설 및 피뢰기와 가공지선 차폐효과 검토)

  • Jung, Chae-Kyun;Hong, Dong-Suk;Lee, Jong-Beom;Cho, Han-Goo
    • The Transactions of the Korean Institute of Electrical Engineers A
    • /
    • v.50 no.8
    • /
    • pp.359-364
    • /
    • 2001
  • This paper presents the influence of the lightning overvoltage and the shielding effect of lightning arresters and overhead grounding wires on the DC railroad systems. Modeling of railroad system is established in ATPDraw to perform the simulation and the line constants of railroad were calculated using ATP_LCC. When a direct lightning strikes to the DC railroad, the result of simulation reveals that the shielding effect of arresters is reduced at messenger, trolly-wire, and the shielding effects of overhead grounding wire is over 90% than the case which does not include it. Therefore it is evaluated that overhead grounding wires should be installed in the DC railroad line.

  • PDF

A Study on the Measurement of Footing Resistance of Transmission Towers with Overhead Grounding wires (가공지선이 연결된 송전철탑의 탑각저항 측정에 관한 연구)

  • Lee, Won-Kyo;Choi, Jong-Kee;Lee, Young-Woo;Choi, In-Hyuk;Kim, Kyung-Chul
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.23 no.1
    • /
    • pp.61-64
    • /
    • 2010
  • Footing Resistance of a 154 kV transmission towers in korea is commonly required to be less than 15 ohm to avoid lightning back-flashover accident. The periodic measurement of Footing Resistance is important to verify that the grounding performance of the towers has been maintained good. Towers are electrically connected in parallel with overhead grounding wire, therefore footing resistance of each tower will be measured after disconnecting the overhead ground wires from the towers. however, In this paper, three direct measurement methods of footing resistance are presented. There are very useful methods without disconnecting overhead ground wires from the tower under measurement. They are compared in KEPCO 154 kV transmission towers. The experimental results describe performances of them.

Analysis on Effect of Lightning Outage Reduction according to Width of Arm of Ground Wires (가공지선 암길이 증대에 따른 뇌 사고율 저감 효과 분석)

  • Kang, Yeon-Woog;Min, Byeong-Wook;Kim, Tai-Young;Park, Bong-Gyu;Choi, Jin-Sung;Park, Kwang-Uk;Bae, Hyun-Kwon
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.459-460
    • /
    • 2011
  • 한전의 가공 송전선로는 2010년 기준으로 약 12,990km(765 kV 송전선로 354 km, 345 kV 송전선로 약 3,868 km, 154 kV 송전선로 8,173 km, 66 kV 송전선로 : 약 595 km)가 설치되어 운전되고 있다. 이러한 송전선로는 평지, 구릉, 산악지 등에 설치됨으로써 자연환경에 크게 영향을 받는다. 특히 전 세계적으로 낙뢰에 의한 송전선로의 트립 고장이 전체 고장의 약 60%를 점유하는 것으로 보고되고 있으며, 낙뢰에 의한 고장을 최소화하기 위한 내뢰 설계를 시행하고 있다. 한전에서도 전압별 계통의 신뢰도와 경제성을 고려하여 765 kV 송전선로의 목표 사고율은 0.35[건/100 km 년], 345 kV 송전선로의 경우는 1.0[건/100 km.년], 154 kV 송전선로의 경우는 2.0[건/100 km 년] 이하의 목표 사고율을 설정하여 설계 운영하고 있다. 그러나 2000년 이후 낙뢰발생 빈도가 증가하고 있으며, 낙뢰에 의한 고장 점유율도 약 75%로서 고품질 전력공급을 위한 내뢰 대책 수립의 검토가 요구되고 있다.

  • PDF

Analysis on Effect of Surge Impedance Reduction according to Three Ground Wires (써지 임피던스 저감을 위한 가공지선 3조화 효과 분석)

  • Kang, Yeon-Woog;Min, Byeong-Wook;Kim, Tai-Young;Park, Bong-Gyu;Choi, Jin-Sung;Park, Kwang-Uk;Bae, Hyun-Kwon
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.541-542
    • /
    • 2011
  • 한전의 가공 송전선로는 2010년 기준으로 약 12,990km(765 kV 송전선로 354 km, 345 kV 송전선로 약 3,868 km, 154 kV 송전선로 8,173 km, 66 kV 송전선로 : 약 595 km)가 설치되어 운전되고 있다. 이러한 송전선로는 평지, 구릉, 산악지 등에 설치됨으로써 자연환경에 크게 영향을 받는다. 특히 전 세계적으로 낙뢰에 의한 송전선로의 트립 고장이 전체 고장의 약 60%를 점유하는 것으로 보고되고 있으며, 낙뢰에 의한 고장을 최소화하기 위한 내뢰 설계를 시행하고 있다. 한전에서도 전압별 계통의 신뢰도와 경제성을 고려하여 765 kV 송전선로의 목표 사고율은 0.35[건/100 km 년], 345 kV 송전선로의 경우는 1.0[건/100 km 년], 154 kV 송전선로의 경우는 2.0[건/100 km 년] 이하의 목표 사고율을 설정하여 설계 운영하고 있다. 그러나 2000년 이후 낙뢰 발생 빈도가 증가하고 있으며, 낙뢰에 의한 고장 점유율도 약 75%로서 고품질 전력공급을 위한 내뢰 대책 수립의 검토가 요구되고 있다.

  • PDF

An Actual Case of Installing Interphase spacers to Prevent Galloping (154kV 송전선로 갤로핑 현상 소개 및 대책 방안)

  • Lee, Cheong-Han;Yoon, Sang-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2006.07a
    • /
    • pp.446-449
    • /
    • 2006
  • 가공 송전선로의 경과지는 대부분 낮은 산악지로서 때때로 국지적인 기상현상에 노출되어 있다. 이러한 현상으로 매년 11월부터 익년3월 사이에 국지성 톨풍에 의한 갤로핑(Galloping)현상이 발생한다. 이 현상이 우리 전력소의 154kV 금포T/L(금오 S/S-포천S/S)에서 발생하였다. 갤로핑 현상은 바람으로 인하여 전력선이 횡진과 출렁임이 발생하는 것을 말하며, 전력선이 심한 진동을 일으켜 전력선 상간 또는 전력선과 가공지선간의 혼촉으로 고장전류가 생기고, 고장전류에 의한 보호계전기 동작으로 선로가 Trip되며, 이로 인하여 전력공급이 중단된다. 또한 전력선의 기계적인 진동에 의하여 전력선의 단선으로 영구고장을 일으킬 수 있다. 본 논문에서는 경기북부지역의 산악지에 설치된 154kV 송전선로에서 산비탈면을 타고 오르는 상승 바람에 의한 갤로핑 사례를 국내 최초로 현장에서 촬영한 동영상 자료를 토대로 소개하고, 갤로핑 발생시 송전선로에 미친 영향 등 검토 결과를 알아본다. 그리고 전력선 상호간 혼촉이 발생한 지점의 아크 흔적을 설명하고, 갤로핑으로 인한 상간 혼촉방지를 목적으로 개발된 폴리머 상간 스페이서의 시공사례를 소개하며, 현재까지 상간 스페이서(interphase spacer)가 설치된 송전선로의 점검 결과를 소개하고자 한다.

  • PDF