• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1620-1625
• /
• 2015

In this study, a variety of industrial gears, shafts, chains, rollers, mold, etc. are widely used inautomotive steel carbon steel for machine structural SM45C typical material used for the experiments. In order to cure the surface of the test piece after the rough grinding and fine grinding was performed in order polishing. Perform the surface hardening of SM45C lacal area by using a diode laser. The output of the laser diode and the feed rate to the process variable. Micro-hardness testing, microstructure testing, scanning electron microscope testing(SEM), the heat input to the analysis. After analyzing the experiment to compare the mechanical properties of the material. When using a diode laser to assess the soundness of the surface hardening. Accordingly, the process for deriving the optimum demonstrate the feasibility.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1043-1058
• /
• 1990

The Strain rate effect in electro-magnetic forming, which is one of the high velocity forming methods, is studied by the finite element method in this paper. The forming process is simplified by neglecting the coupling between magnetic field and work-piece deformation, and the impulsive magnetic pressure is regarded as inner pressure load. A rate-dependent elasto-plastic material model, of which tangential modulus depends of effective strain rate, is proposed. The model is shown to well describe the transient increase of yield stresses, the decreases of the final displacement and yield stress, the decrease of the difference in the distribution of deformation along the axial direction, and the change of deformation mechanism due to strain rate effect. As a result, displacement, final deformed shape, radial velocity, deformation energy, and the changes of effective stress, effective strain and effective strain rate through plastic working are given. Based on the results, the effectiveness of this model and the strain rate effect of the deformation process of the work-piece are discussed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1519-1529
• /
• 1992

A stepped specimen which is subjected to step loading is modeled to study the initiation and growth of adiabatic shear band using explicit time integration finite element code. The material model for specimen includes effects of thermal softening, strain hardening and strain rate hardening. Various mesh sizes are tested to check whether they are small enough to model highly localized discontinuous phenomena reasonably well. It is shown that the number of adiabatic shear band depends on impact velocity and it is also shown that the initiation and growth of adiabatic shear band inversely depends on prescribed velocity at the top of specimen.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.6
• /
• pp.488-495
• /
• 2008

In order to achieve long fatigue lifetimes for cyclically pressurized thick cylinders, multi-layered compound cylinder has been proposed. Such compound cylinder involves a shrink-fit procedure incorporating a monobloc tube which has previously undergone autofrettage. The basic autofrettage theory assumes elastic-perfectly plastic behaviour. Because of the Bauschinger effect and strain-hardening, most materials do not display elastic-perfectly plastic properties and consequently various autofrettage mo dels are based on different simplified material strain-hardening models, which is assumed that combination of linear strain-hardenig and power strain-hardening model. This approach gives a more accurate prediction than the elastic-perfectly plastic model and is suitable for different strain-hardening materials. In this paper, a general autofrettage model that incorporates the material strain-hardening relationship and the Bauschinger effect, based upon the actual tensile-compressive stress-strain curve of a material was proposed. The model was obtained using the von Mises yield criterion and plane strain condition. The tensile-compressive stress-strain curve was obtained by experiment. The parameters needed in the model were determined by fitting the actual tensile-compressive curve of the material. Finally, strain- hardening model was compared with elastic-perfectly plastic model.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.2
• /
• pp.46-53
• /
• 2000

Hot forging of aluminum alloy has the bad machinability due to continuous chip formation caused from the ductility The bad machinability requires a labor and a high cost to produce final products after hot forging. In industrial field, T4 heat treatment is performed to improve the machinability, and the annealing and the cold sizing are followed. In this study, a series of heat treatments are introduced during hot forging operation without T4 heat treatment after forming so that it improves the machinability with reduction of the number of operations and machining cost. Instead of T4 heat treatment, water cooling and air cooling are tried and compared to find out an optimum cooling condition

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.954-958
• /
• 2001

Perismmon has been consumed for long times in Korea and used as a drug for a long time in Korea, It was known to help alcohol intoxication. Ingested alcohol is metabilized by alcohol dehydrogenease and acetaldehyde dehydrogenase in liver. Alcohol dehydrogenease activator and acetaldehyde dehydrogenase activator(ALDHA) was detercted in persimmon. The oncentration of ALDHA was determined and compared in different havesting time, species, and available processed foods. The level of ALDHA was highest in persimmon (Fuyu) harvested in November. Lower ALDHA activities were found in its processed foods. Persimmon and its processed foods are expected to be effective in decreasing the concentration of alcohol and acetaldehyde after alcohol intake.

• Composites Research
• /
• v.35 no.5
• /
• pp.309-316
• /
• 2022

The demand for cold-resistant cable material is increasing due to the rapid increase in the development of devices that operate in a low temperature environment. Cold tolerance of a thermoplastic polymer largely depends on the type and content of about 20 or more additives used to make the polymer. The phenomenon of polymer hardening at low temperature can be classified into hardening by simple temperature effect, embrittlement at the glass transition temperature, and hardening by crystallization of polymers that tend to crystallize. In this study, a thermoplastic polymer having a low glass transition temperature, a flame retardant, and an additive were mixed to evaluate the mechanical properties of a thermoplastic polymer composite material for electric wires. It has been confirmed that mechanical properties and processability are determined depending on the additives and compatibilizers added, and this study is considered to be useful as basic data for optimization to meet the performance requirements of wires developed for low-temperature use.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.298-301
• /
• 2007

Magnesium alloy sheets have unique mechanical properties such as high in-plane anisotropy/asymmetry of yield stress and hardening response. The unusual mechanical behavior of magnesium alloys has been understood by the limited symmetry crystal structure of HCP metals or by deformation twinning. In the present study, the continuum plasticity models considering the unusual plastic behavior of magnesium alloy sheet were derived for a finite element analysis. A new hardening law based on two-surface model was developed to consider the general stress-strain response of metal sheets such as Bauschinger effect, transient behavior and the unusual asymmetry. Three deformation modes observed during the continuous tension/compression tests were mathematically formulated with simplified relations between the state of deformation and their histories. In terms of the anisotropy and asymmetry of the initial yield stress, the Drucker-Prager's pressure dependent yield surface was modified to include the anisotropy of magnesium alloys.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.172-176
• /
• 1999

에폭시 수지의 강인성 향상을 위하여 양말단에 아민 반응기를 가지는 PES-CTBN-PES triblock copolymer를 합성하여 이를 에폭시 수지의 강인화제로 사용하였으며 경화제로는 p-DDS(p-dichlorodiphenylsulfone)를 사용하였다. 또한 공중합체에 의한 물성 향상효과를 CTBN과 PES-NH$_2$의 블렌드에 의한 경우와 비교하였다. 강인화된 에폭시 수지의 물성은 강인성 및 굴곡특성을 측정하여 분석하였으며, 열특성은 DSC, TGA, 및 DMA에 의해 실시되었다. 그리고 강인화된 에폭시 수지의 강인성 향상 mechanism을 규명하기 위하여 파단면을 SEM으로 분석하여 상분리 거동을 고찰하였다. 높은 유리전이온도와 우수한 기계적 물성을 가지는 고성능 기능성 폴리설폰(PES-NH$_2$)과 상용 액상 고무 첨가제인 CTBN을 이용하여 합성된 공중합체를 강인화제로 사용함으로써 열안정성, 탄성률 및 내식성의 감소없이 에폭시 수지의 쳐대 단점인 강인성을 최적 수준으로 개선시킬 수 있었으며 공중합체의 에폭시 수지에 대한 우수한 용해도에 따른 가공성이 향상되었다.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.3
• /
• pp.242-248
• /
• 2000

수산물 가공시 흘러나오는 폐수 중에 함유되어 있는 수용성 단백질을 chitosan에 흡착시키기 위하여 albumin과 hemoglobin, albumin-myoglobin 혼합단백질을 이용하여 chitosan과의 흡착 및 chitosan 제조조건에 따른 흡착효과와 chitosan의 수용성 단백질 흡착에 미치는 인자를 살펴본 결과는 다음과 같다. Chitosan위 탈아세틸화 조건을 60, 70, 80%로 달리하여, albumin, hemoglobin, albumin-myoglobin 혼합용액에 적용했을때 chitosan의 탈아세틸화도가 높을수록 chitosan과 단백질 사이의 흡착률은 높게 나타났다. 초음파 처리에 의하여 chitosan의 분자량이 작을수록 chitosan과 단백질 사이의 흡착률은 높게 나타났다. pH변화에 따른 chitosan과 수용성 단백질의 흡착률은 albumin 및 albumin-myoglobin 혼합용액에서는 pH 4.0에서, hemoglobin용액에서는 pH 7.0에서 흡착률이 높게 나타났다 chitosan과 수용성단백질과의 흡착에서 반응시간은 albumin및 albumin-myoglobin 혼합용액에서는 4시간, hemoglobin용액에서는 3시간까지 흡착률이 증가하였고, 그 이후의 시간이 경화하여도 흡착률의 증가는 거의 보이지 않았다. 수용성 단백질 용액에 NaCl 농도를 0.1M에서 1.0M로 증가시켜 첨가했을때 염의 농도가 높을수록 chitosan과 단백질 사이의 흡착이 잘 일어나지 않았다.