• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.584-595
• /
• 2021

In this study, the correlation between operating stages of waste air-treating system composed of two alternatively-operating UV/photocatalytic reactors, and the deactivation of photocatalyst used in each operating stage, was investigated by instrumental analysis thereon. The repeated deactivation and subsequent re-generation of photocatalyst used in the waste air treating system of previous investigation performed by Lee and Lim (Korean Chem. Eng. Research, 59(4), 574-583(2021)), were characterized on virgin photocatalyst-carrying porous SiO₂ media (A4), used photocatalyst-carrying porous SiO₂ media (A1, A2 and A3) collected from the corresponding photocatalytic reactor upon 1^st, 2^nd, and 3^rd run, respectively, regenerated photocatalyst-carrying porous SiO₂ media upon 1 time-run (AD1) and 3 times regenerated photocatalyst-carrying porous SiO₂ media upon 3 time-runs (AD3) by instrumental analysis including BET analysis, SEM, XPS, SEM-EDS and FT-IR. As a result, the proper regeneration-temperature for deactivated photocatalyst to be regenerated several times (more than 3 times), was suggested below 200 ℃. Such temperature of deactivated photocatalyst-regeneration was almost consistent to the one, according to BET analysis, at which tiny nano-pores blocked by adsorbed ethanol-oxidative and degraded intermediates (AEODI), were regenerated to be reopened through almost complete mineralization of AEODI. In particular, the results of XPS analysis indicated an incurrence of insignificant deactivation of photocatalysis upon 1^st run of UV/photocatalytic reactor (A or C) of the previous investigation. In addition, the results of XPS analysis were consistent with the experimental results of the previous investigation in that 1) deactivation of photocatalyst incurred during 2^nd run of the UV/photocatalytic reactor (A or C) resulted in decreased removal efficiency, by ca. 5% and 5%, of ethanol and hydrogen sulfide, respectively, compared with its 1^st run; 2) there was insignificant difference between the removal efficiencies of its 2^nd run and 3^rd run. Furthermore, the removal efficiencies of ethanol and hydrogen sulfide for hypothetical 4^th run of photocatalytic reactor in the previous investigation, using AD3, were expected to decrease, compared with its 3^rd run, by much more than those for 2^nd run in the previous investigation did, compared with its 1^st run.

• Korean Journal of Environmental Biology
• /
• v.39 no.3
• /
• pp.354-361
• /
• 2021

Understanding the phytotoxic mechanism of methyl bromide (MB), an essential fumigant during the quarantine and pre-shipment process, is urgently needed to ensure its proper use and reduce international economic losses. In a previous study, two main MB-induced toxic mechanisms such as reactive oxygen species (ROS) and auxin distribution were selected by analyzing transcriptomic analysis. In the study, a 3-week-old A. thaliana was supplied with 1 mM ROS scavengers [N-acetyl-L-cysteine (NAC) or L-glutathione (GSH)] and 1µM indole-3-acetic acid(IAA) three times every 12 h, and visual and gene expression assessments were performed to evaluate the reduction in phytotoxicity by supplements. Phytotoxic effects on the MB-4h exposed group were decreased with GSH application compared to the other single supplements and a combination of supplements at 7 days post fumigation. Among these supplements, GSH at a concentration of 1, 2, and 5mM was suppled to A. thaliana with MB-fumigation. During a long-term observation of 2 weeks after the fumigation, 5 mM GSH application was the most effective in minimizing MB-induced phytotoxic effects with up-regulation of HSP70 expression and increase in main stem length. These results indicated that ROS was a main key factor of MB-induced phytotoxicity and that GSH can be used as a supplement to reduce the phytotoxicity of MB.

• Land and Housing Review
• /
• v.12 no.3
• /
• pp.11-26
• /
• 2021

With the increasing demand for office space, there have been questions on how office rent distribution produces a change in the urban spatial structure in Seoul. The purpose of this paper is to investigate a relative price gradient and to present a time-series model that can quantitatively explain the dynamic changes in the urban spatial structure. The analysis was dealt with office rent above 3,306 m² for the past 10 years from 1Q 2010 to 4Q 2019 within Seoul. A modified repeat sales model was employed. The main findings are briefly summarized as follows. First, according to the estimates of the office price gradient in the three major urban centers of Seoul, the CBD remained at a certain level with little change, while those in the GBD and the YBD continued to increase. This result reveals that the urban form of Seoul has shifted from monocentric to polycentric. This shows that the spatial distribution of companies has gradually accelerated decentralized concentration implying that the business networks have become significant. Second, contrary to small and medium-sized office buildings that have undertaken no change in the gradient, large office buildings have seen an increase in the gradient. The relative price gradients in small and medium-sized buildings were inversely proportional among the CBD, the GBD, and the YBD, implying their heterogeneous submarkets by office rent movements. Presumably, those differences in the submarkets were attributed to investment attraction, industrial competition, and the credit and preference of tenants. The findings are consistent with the hierarchical system identified in the Seoul 2030 Plan as well as the literature about Seoul's urban form. This research claims that the proposed method, based on the modified repeat sales model, is useful in understanding temporal dynamic changes. Moreover, the findings can provide implications for urban growth strategies under rapidly changing market conditions.

• Korean Journal of Environmental Biology
• /
• v.39 no.3
• /
• pp.362-373
• /
• 2021

This study was conducted to establish mosquito distribution density and habitat in Sejong city for the prevention of mosquito-borne infectious diseases. The overall distribution of mosquitoes in the Sejong City was investigated, and the population density of mosquitoes in the old and new city was analyzed. Mosquito populations were determined using MOSHOLE and Blacklight traps once a week overnight. We also compared the mosquito population density of the old city and the new city, and the daily mosquito population was calculated using the data from the smart mosquito trap(DMS). Of all the study sites, Geumnam-myeon had the highest number of mosquitoes captured, and the dominant species were Armigeres subalbatus and Culex pipienspallens. Mosquito species with the potential for transmitting diseases were mainly found in Yeonseo-myeon (106 individual), and Geumnam-myeon (101). Mosquito collection rates by MOSHOLE trap and Blacklight trap were 58.49% and 41.51%, respectively. We concluded that using CO₂ would be the most suitable approach for collecting mosquitoes. The mosquito population density in the old city (92.05±7.04) was approximately twice that of the new city(51.50±4.05). Since Sejong City is divided into old city and new city, it is difficult to spot remarkable effects in a standardized way. For effective quarantine, differentiation of quarantine must be established. This study results provide a basis for Sejong City's integrated mosquito control guidelines, and therefore effective control of which we believe will help control the spread of mosquito-borne diseases and reduce damage from mosquitoes.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.5
• /
• pp.159-175
• /
• 2021

This study attempted to analyze the relationship between influencer's characteristic factors such as professionalism, authenticity, and interactivity and content quality factors consisting of accuracy, completeness, and diversity on brand attitude and purchase attitude through trust and self-consistency. To reveal the structural relationship between main variables, a survey was conducted on 201 users. An EFA, CFA, and reliability analysis were performed to confirm reliability and validity. And structural equation was conducted to verify hypothesis. The main results are as follows. First, it was found that professionalism and interactivity had a significant positive effect on trust. And, accuracy, completeness, and variety were all found to have a significant positive effect on trust. Second, in the relationship between individual characteristic factors and self-consistency, it was found that professionalism and authenticity had a significant positive effect on self-consistency. In addition, in the relationship between content quality and self-consistency, accuracy, completeness, and diversity were found to have a positive effect on self-consistency along with trust. Third, in the relationship between trust and self-consistency on brand attitude and purchase intention, both trust and self-consistency were found to have a statistically significant positive effect on brand attitude. It was found that only self-consistency and brand attitude had a statistically significant positive effect on purchase intention. These findings showed that when users perceive professionalism and interaction with influencer, trust increases, and professionalism and progress increase self-consistency with influencer. In addition, in the case of content quality, it was found that trust and self-consistency responded positively when perceived content quality through content accuracy, completeness, and diversity. Also, trust and self-consistency increased attitudes toward brands and could influence consumption behavior such as purchase intention. Therefore, for effective marketing performance using influencer's influence in the field of influencer marketing, which has a strong information delivery on products and brands, not only personal characteristics such as professionalism, authenticity, and interactivity, but also quality of content should be considered. The above research results are expected to suggest implications for marketing strategies and practices as one available basic data to exert the expected effect of marketing using influencer.

• Journal of Nutrition and Health
• /
• v.54 no.5
• /
• pp.560-572
• /
• 2021

Purpose: In this study, the serving size of home meal replacement (HMR)-soups (Guk, Tang) and stews (Jjigae) available in the Korean market was investigated, and an evaluation of the nutrition per serving was conducted based on the nutrition labeling. Methods: The market research was conducted from March to August 2021 on products sold on the internet, convenience stores, supermarkets, and hypermarkets. A total of 370 products were investigated and classified into 3 types: Guk (n = 129), Tang (n = 132), and Jjigae (n = 109). Results: An analysis of the survey revealed that 72.9% of Guk, 71.2% of Tang, and 79.8% of Jjigae had labels with servings per container, and 89.2% of Guk, 91.7% of Tang, and 99.1% of Jjigae had labels with nutrition facts. The nutritional evaluation per serving of Guk, Tang, and Jjigae was conducted for 259 products (87 Guk, 86 Tang, and 86 Jjigae) having labels containing both the servings per container and nutrition facts. The average serving size of Tang was 367.6 g, which was significantly higher than Guk (325.3 g) and Jjigae (305.1 g) (p < 0.001). The calorie content of Jjigae (171.4 kcal) and Tang (162.3 kcal) was significantly higher than Guk (90.8 kcal) (p < 0.001), and the protein content was the highest in Tang (16.3 g) (p < 0.001). The sodium content per serving of Jjigae (1,479.0 mg) was significantly higher than Guk (1,073.3 mg) and Tang (959.8 mg) (p < 0.001). The percent daily value per serving of all three types was less than 10% on average for calories and 15-30% for protein, whereas for sodium showed an average of around 50% (48-74%). Conclusion: The serving size and nutritional value per serving of the HMR-soups and stews found in this study can be used as basic data to establish the reference serving size.

• Clean Technology
• /
• v.27 no.3
• /
• pp.232-239
• /
• 2021

In order to develop a novel system named "thermal medium and gas circulation type pyrolysis system," this study was conducted to obtain basic data for process simulation before performing the pyrolysis experiment. Polypropylene (PP) was chosen as model material in the basic pyrolysis experiment instead of waste plastic and fluidized sand (hereinafter referred to as "sand"), and it was used as a heat transfer material in the "thermal medium and gas circulation type pyrolysis system." Ni was impregnated as an active catalyst on the sand to promote catalytic pyrolysis. The basic physical properties of PP were analyzed using a thermogravimetric analyzer, and pyrolysis was performed at 600 ℃ in an N₂ atmosphere to produce liquid oil. The distribution of the carbon number of the liquid oil generated through the catalytic pyrolysis reaction was analyzed using GC/MS. We investigated the effects of varying the pyrolysis space velocity and catalyst amount on the yield of liquid oil and the carbon number distribution of the liquid oil. Using Ni/sand, the yield of liquid oil was increased except with the pyrolysis condition of 10 wt% Ni/sand at a space velocity of 30,000 h^-1, and the composition of C₆ ~ C₁₂ hydrocarbons increased. With increases in the space velocity, higher yields of liquid oil were obtained, but the composition of C₆ ~ C₁₂ hydrocarbons was reduced. With 1 wt% Ni/sand, the oil yield obtained was greater than that obtained with 10 wt% Ni/sand. In summary, when 1 wt% Ni/sand was used at a space velocity of 10,000 h^-1, the oil yield was 60.99 wt% and the composition of C₆ ~ C₁₂ hydrocarbons was highest at 42.06 area%.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.574-583
• /
• 2021

Waste air containing ethanol (100 ppmv) and hydrogen sulfide (10 ppmv) was continuously treated by waste air-treating system composed of two annular photocatalytic reactors (effective volume: 1.5 L) packed with porous SiO₂ media carrying TiO₂-anatase photocatalyst, one of which was alternately operated for 32 d/run while the other was regenerated by 100 ℃ hot air with 15 W UV(-A)-light on. As its elimination-behavior of ethanol, the removal efficiencies of ethanol at 1^st, 2^nd and 3^rd operation of the photocatalytic reactor system(A), turned out to be ca. 60, 55 and 54%, respectively, at their steady state condition. Unlike the elimination-behavior of ethanol, its hydrogen sulfide-elimination behavior showed repeated decrease of hydrogen sulfide removal efficiency by its resultant arrival at a lower level of steady state condition. Nevertheless, the removal efficiencies of hydrogen sulfide at 1^st, 2^nd and 3^rd operation of the photocatalytic reactor system, turned out to be ca. 80, 75 and 73%, respectively, at their final steady state condition, higher by ca. 20, 20 and 19% than those of ethanol, respectively. Therefore, assuming that adsorption on porous SiO₂-photocatalyst carrier was regarded to belong to a reversible deactivation and that decreased % of removal efficiency due to the reversible deactivation of photocatalyst including the adsorption was independent of the number of its use upon regeneration, the increments of the decreased % of removal efficiency of ethanol and hydrogen sulfide, due to an irreversible deactivation of photocatalyst, for the 3^rd use of regenerated photocatalyst, compared with the 2^nd use of regenerated photocatalyst, were ca. 1 and 2%, respectively, which was insignificant or the less than those of ca. 5 and 5%, respectively, for the 2^nd use of regenerated photocatalyst compared with the 1^st use of virgin photocatalyst. This trend of the photocatalytic reactor system was observed to be similar to that of the other alternately-operating photocatalytic reactor system.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.5
• /
• pp.399-415
• /
• 2021

This study was conducted to suggest the optimal periods for planting and felling Larix kaempferi tree by monitoring its cambial activity period. In addition, the heat summation to induce the cambial activity of Larix kaempferi was investigated. The study sites were at Mt. Worak and Mt. Midong. After selecting 5 trees at Mt. Worak and Mt. Midong, the cambium samples were collected using a mini trephor with 2 mm diameter from April 7 to October 6, 2017 at Mt. Worak, and from April 7 to September 29, 2017 at Mt. Midong. After the collected cambium samples were embedded in PEG2000, transverse thin sections with a thickness of 10 to 15 ㎛ were prepared using a microtome. One Larix kaempferi sample from each site, Mt. Worak and Mt. Midong, in which the accurate monitoring of cambial activity was impossible due to the formation of traumatic resin canal, was excluded from the study. The observation of the initiation date of cambial activity under a light microscopy revealed that 2 specimens from Mt. Worak and 3 from Mt. Midong showed the initiation on April 28. The remaining 2 specimens of Mt. Worak and 1 specimen of Mt. Midong were initiated on May 4, which was a week later than the others. The heat summation that induced the initiation of cambial activity was 196.4-271.8 at Mt. Worak and 204.7-277.3 at Mt. Midong, which was similar. The termination of cambial activity occurred between August 4 and 25 at Mt. Worak, and between August 4 and September 1 at Mt. Midong. Based on the above results, it was found that the optimal planting period for Larix kaempferi in Mt. Worak and Mt. Midong was before April, about a month before the cambium activity, and the felling period was from October when the cambial activity was completely terminated.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.6
• /
• pp.757-772
• /
• 2019

The purpose of this paper is to measure the clustering change and analyze empirical results, and choose the clustering ports for Busan, Incheon, and Gwangyang ports by using Artificial Neural Network, Social Network, and Tabu Search models on 38 Asian container ports over the period 2007-2016. The models consider number of cranes, depth, birth length, and total area as inputs and container throughput as output. Followings are the main empirical results. First, the variables ranking order which affects the clustering according to artificial neural network are TEU, birth length, depth, total area, and number of cranes. Second, social network analysis shows the same clustering in the benevolent and aggressive models. Third, the efficiency of domestic ports are worsened after clustering using social network analysis and tabu search models. Forth, social network and tabu search models can increase the efficiency by 37% compared to that of the general CCR model. Fifth, according to the social network analysis and tabu search models, 3 Korean ports could be clustered with Asian ports like Busan Port(Kobe, Osaka, Port Klang, Tanjung Pelepas, and Manila), Incheon Port(Shahid Rajaee, and Gwangyang), and Gwangyang Port(Aqaba, Port Sulatan Qaboos, Dammam, Khor Fakkan, and Incheon). Korean seaport authority should introduce port improvement plans by using the methods used in this paper.