• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.492-497
• /
• 2009

사질토의 최대/최소 밀도는 사질토 지반의 중요한 물리적 특성인 상대밀도를 결정할 때 이용된다. 그러나 최대/최소 밀도를 결정하는 방법에는 여러 가지가 있으며, 각 방법들에 따라 결정되는 값도 달라진다. 본 시험에서는 여러 시험방법의 최대/최소 밀도를 비교하는 연구를 수행하였다. 본 연구에서 적용된 최대밀도 결정방법은 ASTM, JIS, Simplified 방법 및 Air pluviation 방법이며, 최소밀도 결정방법은 ASTM, JIS 및 Slurry 방법이다. 시험모래는 부산지역에서 얻어진 3가지 모래시료를 이용하였다. 시험 결과, Air pluviation 방법이 가장 큰 최대 밀도값을 주었으며, JIS 방법이 가장 작은 최소 밀도를 나타내었다. 또한 최대밀도를 위하여 JIS 및 Simplified 방법으로 적용한 후 추가적인 다짐을 수행한 결과, Simplified 방법이 입자의 파괴나 입자간의 분리효과 없이 가장 큰 최대밀도를 나타내었다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.4
• /
• pp.337-342
• /
• 1984

224 profiles representing 19 soil series were subjected to multiple regresion analysis to determine the relative contribution of organic matter(OM) and clay content to total cation exchange capacity(CEC) in sandy soil. The independent variables were OM and clay, with the dependent variable CEC. Simple correlation coefficients showed high significance at CEC-OM and CEC-clay. The partial regression coefficients indicated that CEC for each gram of OM was calculated to be 0.549 and 1.351 meq of top and subsoil. The clay contributions of top and subsoil were 0.247 and 0.226 meq, respectively. The standard partial regression coefficients appeared that clay content was 1.23 times as important as orgnic matter in predicting CEC.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.375-392
• /
• 2018

The shield TBM method is widely adopted for tunneling works in urban area because it has more beneficial ways to control settlement at ground surface than conventional mined tunneling. In the shield tunneling, backfill grouting at tail void is crucial because it is supposed not only to restraint ground deformation around tail void during excavation but also to compensate precedent ground settlement by pushing up the ground with highly pressurized grout. However, the tail void grouting has been found to be ineffective for settlement compensation particularly in sandy ground, which might be caused by complicate interaction between ground and tail void grouting. In this paper, the effects of tail void grouting on behavior of ground in shield TBM tunneling were investigated based on 3-dimensional finite element analyses. The results of numerical analyses indicated that backfill grouting actually reduces settlement by degrading settlement increasing rate in excavation, which means decrease of volume loss. Meanwhile, the grouting could not contribute to compensate the precedent settlement, because reduction of volume loss by grouting was found to be counterbalanced by volume change of ground.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.11
• /
• pp.27-38
• /
• 2009

In this study, a series of 1 g shaking table model pile tests were carried out in saturated dense and loose sand to evaluate dynamic p-y curves for various conditions of flexural stiffness of a pile shaft, acceleration frequency and acceleration amplitude for input loads. Dynamic p-y backbone curve which can be applied to pseudo static analysis for saturated dense sand was proposed as a hyperbolic function by connecting the peak points of the experimental p-y curves, which corresponded to maximum soil resistances. In order to represent the backbone curve numerically, empirical equations were developed for the initial stiffness ($k_{ini}$) and the ultimate capacity ($p_u$) of soils as a function of a friction angle and a confining stress. The applicability of a p-y backbone curve was evaluated based on the centrifuge test results of other researchers cited in literature, and this suggested backbone curve was also compared with the currently available p-y curves. And also, the scaling factor ($S_F$) to account for the degradation of soil resistance according to the excess pore pressure was developed from the results of saturated loose sand.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.6
• /
• pp.17-26
• /
• 2021

Ground investigation and result analysis generally used to examine all sorts of structures' subsidence or stability can be classified into sandy soil and cohesive soil, and analysis on the liquid limit of soil is utilized to evaluate the physical properties of ground and types or technical behavior of soil. The most widely used method to analyze liquid limit is Casagrande with which liquid limit can be calculated relatively easily; however, it is fairly difficult to apply it to soil equipped with intermediate properties. Therefore, concerning the properties of soil having the intermediate properties of sedimentary ground, this researcher mixed the clay from Yangsan, Gwangyang, and Busan with sandy soil to make intermediate soil and then carried out the test of consistency limit and also evaluated applicability by using the suggested formula of consistency revision. The sample of intermediate soil was the mixture of clay and sandy soil, and to produce intermediate soil, the content (F_c) of fine soil was applied as 50%, 75%, or 100%. Regarding the physical properties of intermediate soil, to maintain the properties of clay in the natural state, bentonite was added at a fixed rate for controlling the properties of clay, and then, consistency was analyzed. By adopting the formula of consistency revision suggested in advanced research, this author analyzed consistency based on the experiment and consistency based on the suggested formula of revision. Also, about intermediate soil collected at the site, consistency based on the experiment and consistency based on the suggested formula of revision were analyzed comparatively, and about intermediate soil collected, this researcher analyzed particle size and calculated the content (F_c) of fine soil to analyze intermediate soil in diverse conditions. Moreover, about intermediate soil collected at the site, the suggested formula of consistency revision was applied to calculate the compression index, and the compression index based on the experiment and the compression index based on the suggested formula were analyzed comparatively to evaluate the applicability of the suggested formula.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.1
• /
• pp.43-50
• /
• 2005

Jet grouting method is widely being used in many geotechnical problems, especially for the purpose of reinforcement of clayey ground and cut-off wall of sandy ground. However, its design depends on highly empirical method, in which many researches have been undertaken. This study investigated the effect of cavitation on jet grouting. Small-scaled model tests were carried out using specially designed and fabricated device to analyze the effect of cavitation on jet grouting with various test conditions including ground condition, injection pressure, and injection time. The test results show that cavitation has a significant effect on jet grouting, and it has a potential for engineering application.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.10a
• /
• pp.81-88
• /
• 1997

현재 국내외에서 해안가에 수심이 낮은 지역을 중심으로 대규모 매립공사를 수행하여 주택단지, 항만시설, 공업단지 및 공항부지 등으로 사용하고 있다. 매립재를 양질의 모래로 사용하는 경우 매립방법에 따라 매립토의 조밀정도는 다르나 어떠한 경우든 상당히 느슨하거나 중간정도 느슨한 상태로 존재한다. 이런한 느슨한 사질토는 지진 시 액상화 현상에 민감하고, 낮은 지지력 및 큰 즉시침하를 야기시킨다. 따라서 매립된 느슨한 사질토는 향후 시설될 구조물의 중요도에 따라 개량할 필요가 있다. 본 현장의 준설 매립된 사질토의 지반 개량에 적용된 동다짐의 시험시공중 pounder에 accelerometer를 설치하고 적외선 beam을 이용, 충격시의 pounder의 deccleration과 impact velocity를 측정하였다. 여기에서는 이들 실측치를 근거로 중량물체(pounder)의 동적 거동 및 충격시 과잉간극수압 변화를 살펴보았다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.746-756
• /
• 2004

포화토의 거동은 흙과 유체사이의 상호작용에 의해 지배된다. 특히, 동화중 작용시 포화된 사질토에서는 이러한 상호작용에 의해 급격한 액상화 현상이 유발되며 이는 동역학직, 유체역학직으로 복합적인 거동을 나타네어 복합하므로 오직 수치해석적인 방법을 이용한 거동해석만이 가능하다. 본 연구는 사질토에서의 동적 거동해석을 위한 수치해석기법 개발에 그 목적을 두었다. 본 수치해석기법은 Hiremath (1987, 1996)의 "Dynamics for Saturated Soils" 이론에 Sandhu (1975a, 1975b, 1976)의 Variational 기법을 적용하여 개발되었으며 간극수압과 관련된 다양한 토질역학적 문제들에 적용될 수 있을 것으로 기대된다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.10a
• /
• pp.249-256
• /
• 1998

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.03a
• /
• pp.113-124
• /
• 1997