• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.858-863
• /
• 2020

We experimented with the particle-settling velocity and CHCl3 absorption efficiency of seven activated-carbon and analyzed seven heavy metal contents by elution for application to the field treatment of sunken HNS on the marine seabed. The mean particle-settling velocity was in the range 0.5-8 cm/s, except when the 8-20 mesh was used. The larger the HNS particle, the faster the particle-settling velocity was, and the CHCl3 absorption efficiency increased considerably owing to the larger surface area. In addition, the elution test results showed that the total Zn and As contents in >100-meshed activated carbon was higher than the contents criteria for the standard for water-treatment agents, and Cr, Zn, and As were released at higher concentrations than those released by other activated-carbon groups. Taken together, the CHCl3 absorption efficiency, settling velocity, and elution test results suggested that the 20-60, 20-40, and 2mm&down mesh activated-carbon adsorbents could be applied to the field treatment of HNSs and that the minimum required amount for field treatment were 0.82, 0.90, and 1.28 ton/㎘, respectively, as calculated based on the HNS-adsorption-capacity priority.

• Journal of Wetlands Research
• /
• v.18 no.3
• /
• pp.324-329
• /
• 2016

Constructed wetlands are widely applied in urban and rural areas for various purposes such as pollutants reduction, acquisition of eco-spaces and habitats, flooding reduction, acquisition of water resources and environmental education. Since the design of constructed wetlands utilizes ecosystems, special consideration must be given to ecological mechanisms, environmental mechanisms and hydrological mechanisms. To ensure the sustainable functionality of constructed wetlands, it is necessary to achieve stable flow rate and velocity, and remove sediments to ensure sufficient space for detention. To enhance the efficiency of constructed wetland sedimentation basins, this study determined the optimal position for baffle installation, and applied Computational Fluid Dynamics (CFD) to the cross-sectional design of wetlands. CFD analysis revealed that the decrease in flow velocity with baffle installation enhanced the efficiency of sedimentation of particulate matters. Vertical baffles had higher sedimentation efficiency than those with an inclined angle. When vertical baffles were installed in the sedimentation basin of a hybrid constructed wetland to reduce non-point source pollutants in urban areas, the average flow velocity within the basin decreased by 10~30%, while the sedimentation efficiency improved by 1.3~1.5 times. The application of CFD to constructed wetlands is expected to improve the cost efficiency of designing hybrid constructed wetlands with high removal efficiency.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.85-89
• /
• 2005

An aim of this study is to study the correlation between rheological properties and sedimentation of capsules in aqueous polymer solution with low viscosity. Rheological properties of aqueous polymer solutions were controlled by carbomer (C), acylate/C10-30 alkyl acylate crosspolymer (AC), and ammonium acryloyldimethyltaurate/VP copolymer (AV). Small amount of polymer C solution had the highest viscosity and yield stress of polymer AV solution was higher than that of polymer C solution in the same viscosity when the concentration of polymer AV exceeded $0.35 wt\%$. Each aqueous polymer solution was tested and the results showed that as viscosity and yield stress increased, the sedimentation ratio of capsules decreased. The viscoelasticity data also showed the same tendency in a shear stress range of 0.1 to 2.0 Pa. These results demonstrated that the rheological properties of polymer solutions had a strong correlation with the sedimentation of capsules. When polymer I and AV were used, there was a synergistic effect and the correlation between rheological properties and sedimentation of capsules was very complicated. It was assumed that the characteristics of polymer structure and interaction between polymers caused this phenomena.

• Korean Journal of Materials Research
• /
• v.7 no.2
• /
• pp.145-151
• /
• 1997

Remelting of $A-Si/SiC_{p}$ composites followed by isothermal holding and solidification, leads ro the settling of Sic particles to the bottom of the mold. With the isothermal holding time for molten $A-Si/SiC_{p}$ composites. the particle free zone increases rapidly up to approximately first 30 minutes of the holding time. Experimental resulls of the particle settling confirm that the larger SIC particles sink faster tlun the sniiller particles. An increase in volume fraction of Sic particles decreases the setrling velocity of the particles.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1393-1397
• /
• 2008

본 연구의 목적은 대청호와 하류 하천을 연계하여 연속적으로 부유물질의 이송, 확산, 침강과정을 해석 할 수 있는 통합 탁수 모델을 구축하는데 있다. 저수지와 하천을 연속적으로 모의하기 위해서 횡방향 평균 2차원 수리 수질 모델인 CE-QUAL-W2 (W2)를 사용하였다. 그러나 W2모델은 탁도를 모의 할 수 있는 알고리즘이 없기 때문에 모델 경계지점에서의 탁도-부유사(SS) 농도 상관관계를 조사하여 연속 측정된 탁도를 SS로 변환하였고, SS를 입자크기에 따라 3개의 그룹으로 나누어 각각의 침강속도가 다르게 모의하였다. 모의된 SS는 다시 저수지내 관측지점의 탁도-SS 상관관계를 이용해 탁도로 변환하여 실측값과 비교하였고, 하류 하천에서 취수하는 부여 취수장의 탁도-SS 상관관계를 이용하여 취수 원수의 탁도와 모의값을 비교하였다. 하천의 탁도는 실측값이 없는 관계로 모의된 SS를 그대로 하천의 SS 실측값과 비교하였다. 연구결과 통합모델은 저수지내에서 탁도의 수심별 농도를 잘 예측하였고 입자 크기별 침강속도를 고려한 결과 기존의 단일 SS 침강속도 모델에 비해 탁도 예측 성능이 향상되었다. 모델은 강우시 하천에서 급증하는 SS의 농도 변화를 잘 예측하였고, 금강 하류에 위치한 부여 취수장의 일별 취수 원수의 탁도 시계열 변화와도 비교적 잘 일치하였다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.1 s.16
• /
• pp.13-21
• /
• 2005

Experiments on settling behaviour of fine-grained particles without destroying the large fragile aggregates were carried out in still water with a CCD (Charged Coupled Device)-Camera. The experiments dealt with the measuring of the vertical concentration profile of cohesive particles with a CCD-Camera and the physico-chemical influences (NaCl, density, temperature and pH value) on the vertical distribution of the concentration. The vertical concentration profile of fine suspended particles (alumina and quartz) was possible up to $20,000\;mg/{\ell}$ with a CCD-Camera. The vertical concentration profile of cohesive sediments was on the decrease because of the increasing initial concentration, temperature and salinity. The vertical concentration profile of alumina was on the decrease quicker than quartz with increasing salinity. Furthermore, the pH value affects the settling behaviour of alumina. At a PH value of 4.2 the settling rate of the particles was very low and on the increase until pH 8.9 because of the aggregation behaviour of particles. From the PH value of 9 the average settling velocity was on the decrease.

• Journal of Wetlands Research
• /
• v.10 no.3
• /
• pp.79-86
• /
• 2008

To improve water quality for agricultural use, it is needed to introduce the natural and low-cost self-purification system. It is also necessary to develop the water purification facilities for more efficient and convenient design, construction, operation and management. This study aims to develop the practical facilities to improve water quality for agricultural use. The practical detention pond system, which uses artificial floating island and shield skirts with bio-media, enhanced removal efficiencies of SS, TN and TP more particularly than the detention pond using an auxiliary dam. The removal efficiencies SS, TN and TP for the practical detention pond were 55.7%, 61.0% and 55.9%, respectively. The facilities of the practical detention pond has a lot of disadvantages such as the low-cost and high efficiency as well as uncountable impacts regarding ecology and landscape. However, an auxiliary dam is recommended to be installed in shallow depth due to low efficiency.

• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.303-310
• /
• 2017

This paper is to understand the settling properties of cohesive sediments under effects of ions in turbulent flow. The experiments were conducted using a miniature annular flume(mini flume) with a free water surface. Silica was used as sediment of experiment. The suspended concentrations were measured by using a CCD-Camera. Settling of silica($SiO_2$) was allowed to occur under various shear stresses in a concentration of 7g/L. At condition of pH 4.2 and high NaCl concentration, the floc size D of silica was larger than D at condition of pH6.8 with the bed shear stress increasing. The settling velocity $W_s$ of silica was higher at condition of 10g NaCl/L than $W_s$ at condition of pH4.2. Comparison of measured concentration-time curves and concentration-time curves calculated by this study showed similar tendency in flow under effects of ions.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.71-76
• /
• 2012

Since sediment in a stable state is disturbed during the process from sediment in a natural state to dredged soil, the turbidity of water is not good. When the dredged soil settles again, the volume change in the sediment occurs. Coagulant and flocculant are added for turbidity mitigation of the water and faster settling process of suspended solid, and the amount of the substances affects the characteristics of the dredged soil. This study is to investigate the characteristics of the dredged soil depending on the amount of three chemical products added to the wet dredged soil and the dry dredged soil through measuring the suspended solids (SS), volume change and sedimentation velocity. The experimental measurements show that the SS decreased, the volume change rate increased, and the sedimentation velocity increased, as the chemical amount increased. In addition, it was found that the dry dredged soil reacted even with little quantity of the chemicals because derelict and microorganism are removed due to the drying process at $100{\pm}5^{\circ}C$.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.1
• /
• pp.47-62
• /
• 2001

An experimental study was peformed to provide the numerical models to predict the physical fate of marine debris with the key information concerning their trifling and sinkage on the sea. For hygroscopic materials their floating times in a pseudo ocean environment were measured, and for non-hygroscopic objects their drifting limes in a certain wave condition were measured. For sinking materials or objects became to be sinkable free falling experiment was performed to evaluate their falling speed. Summarized information was condensed into a numerical model to predict the most possible region of a significant marine debris accumulation, and the seas connected to the Han river and the Nak-Dong river were considered for the simulation.