• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.14-19
• /
• 2011

We have fabricated GaN Schottky barrier diode (SBD) for high-voltage applications on Si substrate. The leakage current and the electrical characteristics of GaN SBD are investigated by annealing metal-semiconductor junctions. Ohmic junctions of Ti/Al/Mo/Au and Schottky junctions of Ni/Au are used in the fabrication. A test structure is proposed to measured buffer leakage current through a mesa structure. When annealing temperature is increased from $700^{\circ}C$ to $800^{\circ}C$, measured buffer leakage current is also increased from 87 nA to 780 nA at the width of 100 ${\mu}m$. The diffusion of Au, Ti, Mo, O into GaN buffer layer increases the leakage current and that is verified by Auger electron spectroscopy. Experimental results show that the low leakage current and the high breakdown voltage of GaN SBD are achieved by annealing metal-semiconductor junctions.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.41-49
• /
• 2010

Being popularized the use of portable entertainment/information devices, the demand on flash memory has been also increased radically. In general, flash memory reveals various error patterns by the devices it is mounted, and thus the memory makers are trying to minimize error ratio in the final process through not only the electric test but also the data integrity test under the same condition as real application devices. This process is called an application-level memory test. Though currently various flash memory testing devices have been used in the production lines, most of the works related to memory test depend on the sensual abilities of human testers. In case of testing the flash memory for MP3 devices, the human testers are checking if the memory has some errors by hearing the audio played on the memory testing device. The memory testing process like this has become a bottleneck in the flash memory production line. In this paper, we propose an audio comparison technique to support the efficient flash memory test for MP3 devices. The technique proposed in this paper compares the variance change rate between the source binary file and the decoded analog signal and checks automatically if the memory errors are occurred or not.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.761-766
• /
• 2020

Phenylamine derivatives are substances that have a biochemical action and are widely applied as psychotropic drugs. In particular, with regard to the quantitative analysis of substances such as ephedrine, amphetamine, pentermine, and dopamine, many previous studies such as electrochemical, vacuum ultraviolet method, and gas chromatography have been conducted. However, there have not been many studies on the structural characteristics of molecular units. Therefore, In this study, we used (HyperChem8.0's, HC) semi-empirical PM3 method to calculate the total energy, band gap, electrostatic potential, and net charge of ephedrine, amphetamine, pentamine and dopamine to investigate the chemical properties of each derivative according to the molecular structure change. The results showed that for total energy -43,171.8, -32,9538.3, -36,407.3 and -43,061.2 Kcal/mol, respectively, while for band gaps, 10.16379377, 9.9531666, 9.7878002 and 9.0589282 eV. Also, for electrostatic potentials, 1.301~-0.045, 1.694~0.299, 0.694~-0.158 and 1.587~-0.048 respectively. Finally, looking at the distribution of net charges, the oxygen atoms, nitrogen atoms and carbon atoms were -0.312~-0.242, -0.161~-0.051 and +0.13~-0.12 respectively. These results are expected to lead to chemical action centered on phenyl radicals and oxygen and nitrogen atoms common to phenethylamine derivatives.

• Korean Journal of Ichthyology
• /
• v.26 no.2
• /
• pp.89-98
• /
• 2014

Eggs development and early life history of the endangered Korean dwarf loach, Kichulchoia brevifasciata (Teleostei: Cobitidae) was investigated to provide basic information regarding biological characteristics and restoration. Adult fish specimens were sampled using a spoon net at Geurnsan-myeon, Goheung-gun, Jeollanam-do, Korea from June to July 2011. Since, spawning characteristics were analyzed, and females were induced to spawn by injecting Ovaprim (0.5 mL/kg) and their eggs were artificially fertilized with sperms by the dry method in the laboratory. Total length of mature female were 46~76 mm with GSI $9.6{\pm}3.77%$, and total length of mature male was 42~52 mm with GSI $3.5{\pm}1.04%$. Sex ratio (♂/♀) was 0.10, and there were no secondary sexual characteristics. The number of mature eggs was averaged $60{\pm}28.7$ per female. The lemon yellow eggs were slightly adhesive $1.46{\pm}0.07mm$ in diameter. The embryo hatched approximately 66 h after fertilization at $25^{\circ}C$, and the hatched larvae were averaged $5.5{\pm}0.07mm$ in total length (TL). At 6 days after hatching, the larvae averaged $9.0{\pm}0.29mm$(TL) and their yolk sac was completely absorbed. At 17 days after hatching, they entered the juvenile stage and reached $12.6{\pm}0.24mm$ (TL). At 80 days after hatching, the band patterns and external form of the juveniles were similar to those of adults, and they averaged $33.0{\pm}2.19mm$(TL).

• Korean Journal of Ichthyology
• /
• v.25 no.1
• /
• pp.9-16
• /
• 2013

Egg development and early life history of the endangered species, Gobiobotia naktongensis were investigated to provide basic information regarding biological characteristics and restoration. Eggs were obtained from the females with Ovaprim (0.5 mL/kg) injecting and then fertilized using the dry method in the laboratory. Number of spawned eggs were $1,015{\pm}199$. Spawned eggs were strongly adhesive, opaque and grayish and measured $0.74{\pm}0.08mm$ (mean${\pm}$SD) in diameter. Fertilized egg size continuously increase until $2.94{\pm}0.10mm$ for 9 h 30 min at $23^{\circ}C$. Fertilized eggs hatched 26 h after fertilization, and newly hatched larvae an average were $3.4{\pm}0.07mm$(TL). The yolk sacs of the larvae were of most absorbed of 3 days after hatching and $4.4{\pm}0.1mm$ (TL). About at 13 days after hatching, they became to juvenile stage and reached $16.8{\pm}0.50mm$ (TL). At 80 days after hatching, the band patterns and external form of juveniles were similar to those of adults, and they averaged $27.7{\pm}2.32mm$(TL).

• Journal of agricultural medicine and community health
• /
• v.36 no.3
• /
• pp.167-178
• /
• 2011

Purpose: This study was done to identify the effects of a health diary program on fall related outcomes the low-income elderly women. Methods: The study was carried out with a nonequivalent control group with pretest-posttest design. The study was composed of two groups, each made up of 24 subjects: experimental group and control group. The subjects were low-income women aged over 65 years with osteoarthritis and both the experimental and control groups were made up of subjects with the same age profiles. The independent variable was the health diary program, and the dependent variables were fall related outcomes (fear of falling, fall-efficacy, knowledge of fall) difficulty of performing activity, and mood state. The health diary program was performed for 50 minutes each session and twice a week for 8 weeks. Data were collected before the health diary program 10 weeks after the beginning of the program. Results: The experimental group showed significant differences in knowledge of fall, fear of falling, and mood state compared to the control group. However there was no significant differences in difficulty of performing activity and fall efficacy. Conclusion: The results of this study may be used as part of an education to prevent falls for low-income elderly women with osteoarthritis.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.4
• /
• pp.199-204
• /
• 2003

Microstructure and chemical analysis of sintered bricks containing recycled wastes were investigated by SEM and EDS. The recycled wastes for which substitute ceramic raw materials were EAF (electric arc furnace) dust, fly ash and stone ash. Yellowish and brownish regions on the surface and brownish and blackish regions in the inside of bricks were observed. Main component of yellowish region on the surface turned out to be Zn. No chemical difference between the black-core region and brownish matrix. Mullite crystallites of 1 fm size were distributed in the inside of bricks and enclosed by glass phases. It seems that alumine-silicate mixtures of kaolin and fly ash were transformed to mullite crystallites during the sintering. Relatively large pores ot several ten fm size were observed in the black-core region in the inside of bricks. The main components of the inside of brick were Al and Si. The minor components were C, Na, Mg, K, Ca, and Fe. Particularly, the precipitates of Fe-rich crystallites were observed in the amorphous matrix. These precipitates were formed due to the local reduction atmosphere in the inside of bricks. Zn-rich covers were found on the surface of bricks because Zn diffused from the inside of bricks to the surface under the reduction atmosphere.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.1
• /
• pp.32-43
• /
• 1996

A $CdIn_{2}Te_{4}$ single crystal was grown by modified veritical bridgman method. The $CdIn_{2}Te_{4}$ single crystal was evaluated to be tetragonal by the powder method. The $CdIn_{2}Te_{4}$ single crystal was confirmed to be grown with its c axis along the lengthe of the boule by the Laue reflection method. Hall effect of $CdIn_{2}Te_{4}$ single crystal was estimated by van der pauw method from 293 K to 30 K. Hall data of the sample perpendicular to c axis was $n=8.75{\times}10^{23}electrons/m^{3},\;R_{H}=7.14{\times}10^{-5}m^{3}/C,\;{\sigma}=176.40{\omega}^{-1}m^{-1},\;{$\mu}=3.41{\times}10^{-2}m^{2}/V.s$ and the sample parallel to c axis was $n=8.61{\times}10^{23}electrons/m^{3},\;R_{H}=7.26{\times}10^{-5}m^{3}/C,\;{\sigma}=333.38{\omega}^{-1}m^{-1}\;and\;{$\mu}=2.42{\times}10^{-2}m^{2}/V.s$ for room temperature. The value of Hall coefficient on sample perpendicular or parallel to c axis were positive. There $CdIn_{2}Te_{4}$ single crystal was p-type semiconductor.

• Journal of the Korean Magnetics Society
• /
• v.7 no.5
• /
• pp.237-242
• /
• 1997

The microstructure and soft magnetic properties of as-deposited Fe-Hf-O thin film alloys, which are produced at $P_{O2}=10%$ by rf magnetron sputtering method in $Ar+O_2$ mixed gas atmosphere, is investigated. Newly developed $Fe_{82}Hf_{3.4}O_{14.6}$ film exhibits good soft magnetic properties with $4{\pi}M_s=17.7$ kG, $H_c=0.7$ Oe and ${\mu}_{eff}$(0.5~100MHz)=2,500, respectively. The Fe-Hf-O films are composed of $\alpha$-Fe nanograins and amorphous phase with larger amounts of Hf and O elements which chemically combine each other. With increasing Hf area fraction, Hf and O contents increased proportionally. It was considered that O content in films was determined by Hf contents, because O was chemically combined with Hf. It results from decreasing the $\alpha$-Fe grain size by precipitates (Hf and O), high electrical resistivity. The $Fe_{82}Hf_{3.4}O_{14.6}$ film exhibits the quality factor (Q=$\mu$'/$\mu$") of 25 at 20 MHz. These good frequency characteristics are considered to be superior to other films already reported.o other films already reported.

• Journal of the Korean Magnetics Society
• /
• v.14 no.4
• /
• pp.149-161
• /
• 2004

The fusion of nano technology and information technology is essential to sustain the present growth rate and to induce new industry in this ever-growing information age. Considering Korean industry whose competitiveness lies heavily on information related technologies, this field will be inevitable for future. Nano materials can be described as novel materials whose size of elemental structure has been engineered at the nanometer scale. Materials in the nanometer size range exhibit fundamentally new behavior, as their size falls below the critical length scale associated with any given property. " Bottom-up' techniques involve manipulating individual atoms and molecules. Bottom-up process usually implies controlled or directed self assembly of atoms and molecules into nano structures. It resembles more closely the processes of biology and chemistry, where atoms and molecules come together to create structures such as crystals or living cells. Nano scale sensors are included in the electronics area since the diverse sensing mechanisms are often housed on a semiconductor substrate and usually give rise to an electronic signal. The application of nano technology to the chemical sensors should allow improvements in functionality such as gas sensing. In this presentation, we will discuss about the nano scale information materials and devices fabricated by using the organic/inorganic nano templates.