• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.306-314
• /
• 2020

The use of synthetic resins in ceramic restoration poses several challenges, including aging and potential damage to artifacts, which has raised the need to investigate new materials and restoration methods. This study set out to incorporate full color 3D printing into the 3D digital technology-based restoration method, an emerging approach currently being researched, and to print out missing parts with color information. After examining material physical properties with an experiment, the investigator printed out missing parts from a white porcelain vessel and grayish-blue-powdered celadon plate and compared them in chromaticity and brilliance. The experimental results show that the outputs had comparable tensile strength to the original restoration materials, whereas the recorded compressive strength was approximately 1.4~2 times higher than that of the original restoration materials. According to the NIST table of color difference values, the white porcelain vessel was visible at ΔE^*ab 1.55, and the grayish-blue-powdered celadon plate was perceivable at 3.34. Even though it was impossible to express the colors accurately owing to printer limitations, this non-contact approach reduced the possibility of damage to the minimum. In conclusion, it can be applied to objects with a high chance of damage or generate display effects through purposeful color differentiation in missing parts.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.311-316
• /
• 2020

The effect of the nitrogen content of sawdust medium (1.2~1.8%) and the restriction stage temperature (2, 4, and 6℃) on the growth and storage characteristics of Flammulina velutipes (winter mushroom) were investigated. With increased nitrogen content, the growth days shortened and the yield of the fruiting body increased. The effect of restriction temperature on the growth of the fruiting body differed depending on the nitrogen content. No difference in restriction temperature was evident for T1 with a low nitrogen content of 1.28%. In medium with a nitrogen content ≥1.55%, the yield and length of the pileus and stipe increased as the restriction temperature decreased. The weight loss ratio according to the storage period did not change according to the nitrogen content in the medium. A low weight loss ratio of 1.50 to 1.93% was observed at a restriction temperature <4℃. When T3 with high nitrogen content in the medium was treated at a restriction temperature of 4℃, the fruiting body color values after 31 days of storage were 84.81 (L) and 6.3 (ΔE). This color change was minute compared to that after other treatments. The sensory characteristics score was 5.2 after 31 days of storage, and the quality remained acceptable for consumption.

• Korean journal of food and cookery science
• /
• v.13 no.4
• /
• pp.492-499
• /
• 1997

The effect of oxidants, gluten and gums on breadmaking quality of wheat-purple sweet potato(Ipomoea batatas) composite flour were studied. Alveograph tests of doughs showed that all additives increased the P, L and W values. Of these additives, L-Ascorbic acid, gluten, carboxy methyl cellulose have a significant effect on alveogram indexes. SEM showed that the dough added with additives changed some what in appearance when compared with the control. When oxidants was added, the doughs discontinuous gluten film were observed. No significant differences ,were evident in bread crumb color among the additives. And textural characteristics of bread crumb were influened by adding additives. Breads containing additives showed an increase in max weight, strength and hardness and a decrease in springness and cohesiveness. Average enthalpy values for all bread crumb after 7days increased with storage time. However, addition of additives decrease the rate of staling slightly more than that of the control. Addition of L-Ascorbic acid, L-Cystine, carboxy methyl cellulose and hydroxy propyl methyl cellulose increased the loaf volume significantly, and with except potassium bromate bread scores were acceptable.

• Korean journal of food and cookery science
• /
• v.18 no.3
• /
• pp.290-299
• /
• 2002

An optional ingredient Perilla Seed paste was adopted to improve the quality of Yulmoo Mul-kimchi during fermentation. The final weight percentage of perilla seed paste in Yulmoo Mul-kimchi was adjusted to 0, 10, 20, 30, and 40% per water respectively. Chemical and sensory characteristics were determined during fermentation at 10$\^{C}$ for 25 days. The effect was varied depending on the amounts of perilla seed paste, but Yulmoo Mul-kimchi fermented with 20% perilla seed paste was most favored for color, smell, sour taste, carbonated taste, texture and overall acceptability in the sensory evaluation. The pH decreased with the increase of total acidity. The total vitamin C content increased initially to the certain level at a certain time of fermentation depending on the level of perilla seed paste, and then decreased later. In case of reducing sugar, the 20% treatment showed the highest content. Turbidity values were generally increased in all samples during fermentation, even though the extents were limited. Total plate count and the number of lactic acid bacteria were gradually increased and then decreased showing the maximum microbial counts during fermentation. The optimum levels of perilla seed paste in Yulmoo Mul-kimchi obtained through experiments were between 20 and 30% of added water content, preferably 20% for color, fermentation-retarding effect, and sensory taste of the product.

• Korean Journal of Food Science and Technology
• /
• v.52 no.4
• /
• pp.415-422
• /
• 2020

This study was conducted to elucidate how rice with different milling degrees (DOM: 10, 20, 30, and 40%) affects rice yakju properties by accelerated aging. There were significant differences among the treatments with respect to the properties except for brownness before aging, which showed no correlation with DOM (p for trend>0.05). In contrast, the amino acidity and brownness significantly decreased after aging as DOM increased, lightness (L) in particular was affected in all the treatments regardless of DOM. Almost all treatments showed significant differences except for the pH and the total acid and alcohol content between before and after aging. Moreover, the amino acidity, brownness, redness (a), yellowness (b), and color difference in all the treatments showed significant differences regardless of DOM. We found a significant difference in the color change. The yakju free amino acid analysis showed that almost all amino acids slightly decreased as DOM increased.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.689-695
• /
• 2016

In this study, the drying characteristics of medicinal (Ganoderma lucidum, Phellinus linteus) and edible (Pleurotus eryngii, Lentinus edodes) mushrooms were investigated. Their shrinkage ratios, Hunter's color values, and rehydration ratios were evaluated. Mushrooms were cut with rectangular (1 cm) and square ($1{\times}1cm$) shapes, and dried in the room temperature and at $50^{\circ}C$ and $70^{\circ}C$ using hot-air dryer. Initial moisture contents of edible mushrooms were higher than those of medicinal mushrooms, whereas final moisture contents were vice versa. Drying rate was the highest when drying at $70^{\circ}C$ (p<0.05). Moreover the drying rate of square slices was higher than that of rectangular slices (p<0.05). The shrinkage ratios of both medicinal mushrooms and edible mushrooms were the least when drying at $50^{\circ}C$ and $70^{\circ}C$, respectively (p<0.05). The changes of color values were less in the medicinal mushrooms dried in the room temperature than in the hot-air dried medicinal mushrooms (p<0.05). However, in case of edible mushrooms, the changes of color values were less in the hot-air dried mushrooms (p<0.05). Rehydration ratios of medicinal mushrooms dried at $50^{\circ}C$ was the highest (p<0.05). In contrast, rehydration ratios of edible mushrooms was the highest when drying in the room temperature (p<0.05). Thus, the hot-air drying at $50^{\circ}C$ would be suggested as the efficient drying method for both medicinal mushrooms and edible mushrooms.

• Korean Journal of Food Science and Technology
• /
• v.52 no.2
• /
• pp.162-166
• /
• 2020

This study examined the effects of additives on the physicochemical properties of gruels during storage. The color, a-value, and b-value of fine-nut, dried pollack, soybean, and chicken gruels increased, while the L-value and whiteness decreased. In addition, the a-value, b-value, and L-value of oyster mushroom gruel decreased upon increase in the storage period. Texture analyzer measurements of gruels revealed that the gumminess, cohesiveness, adhesiveness, and hardness decreased during the storage period of 90 days. The amylose and total sugar contents were also decreased during this storage period. Majority of the fatty acid composition of the gruels during the storage period at 25℃ was due to unsaturated fatty acid. The total unsaturated fatty acid content decreased, whereas saturated fatty acid content increased during the storage period of 45 days.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.39-44
• /
• 2004

This study was carried out to investigate the tenderizing effect of Neungi mushroom (Sarcodon aspratus) powder and its protease. The addition of Neungi mushroom powder and its protease enhanced water retention values (WRY) of meat. The WRY of meat was increased 26.8% by protease addition, compared to 13.8% WRV by sugar addition. This increase in WRY derived to the increase of water soluble fraction in the meat texture by hydrolysis of meat protein, and had the meat tenderized. Concerned to the meat tenderizing effect, the addition of Neungi mushroom powder and its protease have decreased of meat hardness and gave similar tenderizing effect, as compared to commercial tenderizer, papain. The decreasing rates of meat hardness were 51.6% of Neungi mushroom powder, 58.5% of its protease, and 563% of commercial tenderizer, papain. This tenderizing effect of protease attributed to the degradation of muscle fiber protein in meat, such as actin, myosin and connectin etc. The addition of Neungi mushroom to foods gives significant changes in food color, mainly decreasing lightness.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.2
• /
• pp.205-216
• /
• 2023

This study aimed to compare the color stability and surface roughness of three-dimensional (3D) printing resin according to polishing methods. 3D-printed resin specimens were fabricated at TC-80DP (Graphy, Seoul, Korea) with a stereolithography 3D printer, and the specimens were divided into three groups, each of which was not polished, was polished using Enhance^®, and was polished using a Sof-Lex^TM disc. The CIE L^*a^*b^* value and the surface roughness of each group were measured and immersed in artificial saliva and orange juice after 0, 1, 7, 30, and 60 days, and the color difference (ΔE^*) was calculated. As a result of the study, no noticeable color change was observed in artificial saliva, but a noticeable color change was demonstrated in orange juice after 60 days of immersion, and the difference was significant. In the Sof-Lex^TM group, surface roughness according to the solution was found to be significantly higher in the orange juice than that in artificial saliva. No significant difference in color change was found according to the polishing method, but surface roughness was significantly lower in the Sof-Lex^TM group than both that of the unpolished group and that of the Enhance^® group. Nevertheless, all groups exhibited clinically acceptable properties regardless of their higher surface roughness than the threshold for plaque accumulation. Overall, this study recommends utilizing Sof-Lex^TM for polishing 3D printing resin when used in primary anterior tooth coverage.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.2
• /
• pp.73-80
• /
• 2021

Purpose: The purpose of this study is to compare the color stability of provisional restorative materials fabricated by subtractive and additive manufacturing. Materials and Methods: PMMA specimens by subtractive manufacturing and conventional method and bis-acryl specimens by additive manufacturing were fabricated each 20. After immersing specimens in the coffee solution and the wine solution, the color was measured as CIE Lab with a colorimeter weekly for 4 weeks. Color change was calculated and data were analyzed with one-way ANOVA and the Tukey multiple comparisons test (α = 0.05). Results: PMMA provisional prosthetic materials by subtractive manufacturing showed superior color stability compared to bis-acryl provisional prosthetic materials by additive manufacturing (P < 0.05), and showed similar color stability to the PMMA provisional prosthetic materials by conventional method (P > 0.05). Conclusion: It is recommended to fabricate provisional restorations by subtractive manufacturing in areas where esthetics is important, such as anterior teeth, and consideration of the color stability will be required when making provisional prosthetic using additive manufacturing.