• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.49-62
• /
• 2022

The hollow modular concrete block reinforced foundation method is one of the ground reinforcement foundation methods that uses hexagonal honeycomb-shaped concrete blocks with mixed crushed rock to reinforce soft grounds. It then forms an artificial layered ground that increases bearing capacity and reduces settlement. The hollow modular honeycomb-shaped concrete block is a geometrically economical, stable structure that distributes forces in a balanced way. However, the behavioral characteristics of hollow modular concrete block reinforced foundations are not yet fully understood. In this study, a bearing capacity test is performed to analyze the reinforcement effectiveness of the hollow modular concrete block through the laboratory model tests. From the load-settlement curve, punching shear failure occurs under the unfilled sand condition (A-1-N). However, the filled sand condition (A-1-F) shows a linear curve without yielding, confirming the reinforcement effect is three times higher than that of unreinforced ground. The bearing capacity equation is proposed for the parts that have contact pressure under concrete, vertical stress of hollow blocks, and the inner skin friction force from horizontal stress by confining effect based on the schematic diagram of confining effect inside a hollow modular concrete block. As a result of calculating the bearing capacity, the percentage of load distribution for contact force on the area of concrete is about 65%, vertical force on the area of hollow is 16.5% and inner skin friction force of area of the inner wall is about 18.5%. When the surcharge load is applied to the concrete part, the vertical stress occurs on the area of the hollow part by confining effect first. Then, in the filled sand in the hollow where the horizontal direction is constrained, the inner skin friction force occurs by the horizontal stress on the inner wall of the hollow modular concrete block. The inner skin friction force suppresses the punching of the concrete part and reduces contact pressure.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.347-355
• /
• 2022

The safety valve (PSV) is a safety device that automatically releases a spring when the pressure generated by various causes reaches the set pressure, and is restored to a normal state when the pressure falls below a certain level. Periodic inspection and monitoring of safety valves are essential so that they can operate normally in abnormal conditions such as pressure rise. However, as the current safety inspection is performed only at a set period, it is difficult to ensure the safety of normal operation. Therefore, evaluation items were developed by finding failure modes and causative factors of safety valves required for safety management. In addition, it is intended to provide decision-making information for securing safety by deriving the priority of items. To this end, a Delphi survey was conducted three times to derive evaluation factors that were judged to be important in relation to the Failure Mode Cause Factor (FMCFs) of the safety valve (PSV) targeting 15 experts. As a result, 6 failure modes of the safety valve and 22 evaluation factors of its sub-factors were selected. In order to analyze the priorities of the evaluation factors selected in this way, the hierarchical structure was schematized, and the hierarchical decision-making method (AHP) was applied to the priority calculation. As a result of the analysis, the failure mode priorities of FMCFs were 'Leakage' (0.226), 'Fail to open' (0.201), 'Fail to relieve req'd capacity' (0.152), 'Open above set pressure' (0.149), 'Spuriously' 'open' (0.146) and 'Stuck open' (0.127) were confirmed in the order. The lower priority of FMCFs is 'PSV component rupture' (0.109), 'Fail to PSV size calculation' (0.068), 'PSV Spring aging' (0.065), 'Erratic opening' (0.059), 'Damage caused by improper installation and handling' (0.058), 'Fail to spring' (0.053), etc. were checked in the order. It is expected that through efficient management of FMCFs that have been prioritized, it will be possible to identify vulnerabilities of safety valves and contribute to improving safety.

• Korean journal of applied entomology
• /
• v.61 no.2
• /
• pp.357-368
• /
• 2022

We investigated the developmental characteristics of super mealworm (Coleoptera: Tenebrionidae) at four different temperatures (25℃, 27℃, 30℃, and 33℃). The rearing conditions were 9L/15D, 65% RH, and 1,330 to 1,800 lux with wheat bran. The length of developmental period of 1 to 18 instars at each temperature showed that 30℃ was the shortest at 120.0±5.8 days, compared to that at 27℃ (132.6±10.7 days), 33℃ (136.5±9.2 days), and 25℃ (156.7±7.5 days). The larval developmental period was statistically significantly longer at 25℃, 27℃, and 30℃ compared to the length at 33℃. However, the death rate of larvae at 33℃ was 2.7-3.3 times higher than the rate at other temperatures. Body weight was heaviest at 30℃ followed by 27℃, 33℃, and 25℃. The patterns of head capsule, body capsule, and body length were similar to that of body weight. Regression analyses of developmental period, larval body weight, and length according to temperature revealed 29-30℃ as the most suitable temperature. The prepupa rate was 43.1% in 17 instars, 30.3% in 18 instars, 15.4% in 16 instars, 7.1% in 19 instars, 2.2% in 15 instars, and 1.9% in 20 instars, accounting for 88.8% in 16-18 instars. Prepupal period was longer at lower temperatures. For the average prepupal period of 15-18 instars, prepupa time was 18.8±1.9 days at 27℃, 18.8±2.3 days at 30℃, 23.0±2.4 days at 33℃, and 23.1±2.9 days at 25℃. The average pupal period of females and males was 11.1±2.2 and 11.6±2.4 days, respectively. The data indicate that the most suitable rearing temperature of super mealworm was 30℃.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.220-256
• /
• 2022

The most important thing for conserving plant diversity in an area is to make an overall inventory of the plant species inhabiting the area. In particular, limestone areas are known for their high plant diversity and distribution of specific plants. Despite that, only a few have been designated as protected areas. This study investigated the vascular plants distributed in Goyangsan Mtn. and Munraesan Mtn., located in limestone areas of the central part of the Korean Peninsula. A field survey was conducted eight times from April to October 2021. As a result, we identified a total of 654 taxa comprising 113 families, 357 genera, 592 species, 15 subspecies, 44 varieties, and 3 formulas. They included four endangered wild plant species: Astilboides tabularis, Eleutherococcus senticosus, Cypripedium macranthos, and Epilobium hirsutum. Endemic plants in Korea were identified as 32 taxa. Floristic target plants were identified as 168 taxa, specifically 5 taxa of grade V, 41 taxa of grade IV, and 36 taxa of grade III. The red data plants included 2 taxa as "Endangered (EN)", 7 taxa as "Vulnerable (VU)", and 7 taxa as "Near threatened (NT)". A total of 41 taxa of naturalized plants were identified, and 4 of them were invasive alien plants. The surveyed vicinity of Goyangsan Mtn. and Munraesan Mtn. showed high plant diversity and contained core habitats for distribution of an endangered wild plant, Astilboides tabularis,in the limestone area. Moreover, both mountains contained a small population of Cotoneaster integerrimus. These findings confirm that the area has conservation values. Therefore, we propose to identify areas with high plant diversity and designate them as special protected areas.

• Journal of The Korean Association For Science Education
• /
• v.42 no.3
• /
• pp.371-381
• /
• 2022

This study causally investigates whether high school student with high science learning motivation becomes to achieve more or vice versa, and also how those two factors affect STEM career motivation. Research participants were 1st year students in a high school at Seoul. We surveyed their science learning motivation three times in the same time interval in the fall semester of 2021, and once a STEM career motivation in the third period. We collected data from 171 students with their mid-term and final exam scores, with which, we constructed and fitted an autoregressive cross-lagged model. The research model shows high measurement stability and fit indices. All the autoregressive and cross-lagged paths were statistically significant. However, standardized regression coefficients were larger in path from motivation to achievement compared to the opposite. Only science learning motivation shows significant direct effect on STEM career motivation, rather than achievement. For indirect effects, the first science learning motivation affected the final exam score and STEM career motivation, and the final exam score affected STEM career motivation. However, the final exam score did not have a total effect toward STEM career motivation. The result of this study shows reciprocal and cyclic causality between science learning motivation and achievement - in comparison, the effect of motivation for the opposite is larger than that of achievement. Also the result of this study strongly reaffirms the importance of science learning motivation. Instructional implications for strengthening science learning motivation throughout a semester was discussed, and a study for the longitudinal effect of science learning motivation and achievement in high school student toward future STEM vocational life was suggested.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.1
• /
• pp.33-52
• /
• 2022

The History and Culture Park and the Lee Kun-hee Donation Hall will be built in Songhyeon-dong, Seoul. Political games from the Joseon Dynasty to the present greatly influenced the historicity of Songhyeon-dong. However, place analysis was limited to changes in landowners and land uses rather than a historical context. Therefore, this study analyzed the context in which the placeness of Songhyeon-dong changed according to the emergence of cultural hegemony using the perspective of modern cultural geography and comparative history. As a result of the analysis, cultural hegemony in historical transitions, such as Sinocentrism, maritime expansion, civil revolutions, imperialism, nationalism, popular art, and neoliberalism, was found to have created new intellectuals in Bukchon, including Songhyeon-dong, and influenced social systems and spatial policies. In this social relations, the placeness of Songhyeon-dong changed as follows. First, the founding forces of Joseon created pine forests as Bibo Forests to invocate the permanence of the dynasty. In the late Joseon dynasty, it was an era of maritime expansion, and as Joseon's yeonhaeng increased, a garden for the Gyeonghwasejok, who enjoyed the culture of the Qing dynasty, was built. Although pine forests and gardens disappeared due to the development of housing complexes as the population soared during the Japanese colonial era, Cha Gyeong's landscape aesthetics, which harmonized artificial gardens and external nature, are worth reinterpreting in modern times. Second, the wave of modernization created a new school in Bukchon and a boarding house in Songhyeon-dong owned by a pro-Japanese faction. Angukdongcheon-gil, next to Songhyeon-dong, was where thinkers who promoted civil revolution and national self-determination exchanged ideas. Songhyeon-dong, the largest boarding house, served as a residence for students to participate in the March 1st Movement and was the cradle of the resulting culture of student movements. The appearance of the old road is preserved, so it is a significant part of the regeneration of walking in the historic city center, connecting Gwanghwamun-Bukchon-Insadong -Donhwamunro. Third, from the cultural rule of the Government General of Joseon to the Military Government, Songhyeon-dong acted as a passage to western culture with the Joseon Siksan Bank's cultural housing and staff accommodations at the U.S. Embassy. Ancient and contemporary art coexisted in the surrounding area, so the modern and contemporary art market was formed. The Lee Kun-hee Donation Hall is expected to form a cultural belt for citizens with the gallery, Bukchon Hanok Village, the Craft Museum, and the Modern Museum of Art. Discourses and challenges are needed to recreate the place in harmony with the forests, gardens, the street of citizens' birth, history and culture park, the art museum, and the surrounding walking network.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.7
• /
• pp.225-233
• /
• 2021

This study quantitatively compares and analyzes lower extremity muscle activity and motor neurons by performing blood flow-restricting aerobic training in the lower extremities, which is closely related to aerobic capacity for health, in normal people, and provides basic data to suggest the effectiveness of an effective blood-restricting exercise program. would like to provide A group of 10 people who applied aerobic exercise on a treadmill by restricting blood flow to 140 mmHg of pressure was set as Experimental Group I. And 11 people who applied only aerobic exercise on a treadmill were randomly assigned as a control group. The intervention program was implemented on a treadmill for 4 weeks, 3 times a week, once a day, for 30 minutes once. In addition, muscle activity and motor neurons were measured and analyzed using surface electromyography before intervention. As a result of the study, the muscle activity of the rectus femoris, biceps femoris, tibialis anterior and gastrocnemius was significantly increased (p<.001) in the pre-and-poster comparison within the group of experimental group I (p<.001). In the pre-and-poster comparison of the control group, the muscle activity of the rectus femoris, biceps femoris, tibialis anterior and gastrocnemius was significantly increased (p<.001). In comparison of changes between groups, there was a significant difference in the activity of the rectus femoris muscle (p<.05). Combining aerobic exercise in parallel with lower extremity blood flow restriction can be developed into an injury prevention exercise program that can restore functional activity in rehabilitation training for elite athletes and elderly people with weak joints. In addition, based on these results in future research, it is considered that it is necessary to expand the scope of non-normal subjects and conduct various studies according to the pressure intensity.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.1
• /
• pp.68-75
• /
• 2021

Purpose: The purpose of this study was to analyze the motion of the shoulder joint dynamically through a depth sensor-based motion analysis system for the normal group and patients group with shoulder disease and to report the results along with a review of the relevant literature. Materials and Methods: Seventy subjects participated in the study and were categorized as follows: 30 subjects in the normal group and 40 subjects in the group of patients with shoulder disease. The patients with shoulder disease were subdivided into the following four disease groups: adhesive capsulitis, impingement syndrome, rotator cuff tear, and cuff tear arthropathy. Repeating abduction and adduction three times, the angle over time was measured using a depth sensor-based motion analysis system. The maximum abduction angle (θ_max), the maximum abduction angular velocity (ω_max), the maximum adduction angular velocity (ω_min), and the abduction/adduction time ratio (t_abd/t_add) were calculated. The above parameters in the 30 subjects in the normal group and 40 subjects in the patients group were compared. In addition, the 30 subjects in the normal group and each subgroup (10 patients each) according to the four disease groups, giving a total of five groups, were compared. Results: Compared to the normal group, the maximum abduction angle (θ_max), the maximum abduction angular velocity (ω_max), and the maximum adduction angular velocity (ω_min) were lower, and abduction/adduction time ratio (t_abd/t_add) was higher in the patients with shoulder disease. A comparison of the subdivided disease groups revealed a lower maximum abduction angle (θ_max) and the maximum abduction angular velocity (ω_max) in the adhesive capsulitis and cuff tear arthropathy groups than the normal group. In addition, the abduction/adduction time ratio (t_abd/t_add) was higher in the adhesive capsulitis group, rotator cuff tear group, and cuff tear arthropathy group than in the normal group. Conclusion: Through an evaluation of the shoulder joint using the depth sensor-based motion analysis system, it was possible to measure the range of motion, and the dynamic motion parameter, such as angular velocity. These results show that accurate evaluations of the function of the shoulder joint and an in-depth understanding of shoulder diseases are possible.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.3
• /
• pp.36-45
• /
• 2022

This study examines the historical transition process of Hwanseonjeong Pavilion in Suncheon, identifies the landscape of the original Hwanseonjeong Pavilion in the past and its constituent elements, and compares it with the landscape of the present Hwanseonjeong Pavilion at Jukdobong area. It was intended to identify the problems and draw implications for future restoration of Hwanseonjeong Pavilion. Hwanseonjeong pavilion, the subject of this study, was built in 1543 by Tong-won Shim, the governor of Seungpyeong, as a garden architecture for government. Since then, it has been renovated several times, and as a pavilion representing "Seonhyang(immotal world)" Suncheon in the past, it was located along with an artificially created lake and other elements of the garden at a location where can be seen Dongcheon stream and Jukdobong Peak on the opposite side at a glance. Hwanseonjeong pavilion, which had been safely maintained during the Japanese colonial period, was lost on August 28, 1968 due to a major flood in Suncheon. The difference between Hwanseonjeong Pavilion and other lost is that another Hwanseonjeong Pavilion for the role of archery was built on Jukdobong Peak in 1935, before it was destroyed. The restoration case of Hwanseonjeong pavilion provides the following important implications for the restoration of pavilions as a garden architecture: First, the value of a pavilion is not formed from the building itself, but from the relationship with the surrounding landscape. Therefore, restoration of a pavilion should not be approached in the same way as restoration of buildings. Restoration of a pavilion requires efforts to understand the existing landscape value and to restore landscape elements together with buildings. Second, an artificially created long north-south lake along with Hwanseonjeong pavilion was a very important landscape component and a means of providing a way to enjoy the landscape. For restoration in the cultural context of Hwanseonjeong pavilion, efforts are also required to restore not only the architecture, but also the experience of cultural activities through an integrated examination and restoration based on an understanding of the cultural activities performed in Hwanseonjeong Pavilion. Third, compared to the past original Hwanseonjeong Pavilion, the existing Hwanseonjeong Pavilion shows a different shape, composition, scale, color, etc. In terms of the restoration of buildings, it is thought that restoration will be possible only when restoration is done through more accurate historical evidence, research, and investigation.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.2
• /
• pp.143-153
• /
• 2020

Purpose: To evaluate the timing of the improvement in surgical skills of the direct anterior approach for hip arthroplasty through an analysis of the clinical features and learning curve in 58 cases. Materials and Methods: From November 2016 to November 2018, 58 patients, who were divided into an early half and late half, and underwent hip arthroplasty by the direct anterior approach, were enrolled in this retrospective study. The operation time and complications (fracture, lateral femoral cutaneous nerve injury, heterotopic ossification, infection, and dislocation) were assessed using a chi-square test, paired t-test, and cumulative sum (CUSUM) test. Results: The mean operation times in total hip arthroplasty (26 cases) and bipolar hemi-arthroplasty were 132.1 minutes and 79.7 minutes, respectively, demonstrating a significant difference between the two groups. CUSUM analysis based on the results revealed breakthrough points of the operation time, decreasing to less than the mean operation time because of the 16th case in total hip arthroplasty and 14th case in bipolar hemiarthroplasty. Complications were encountered in the early phase and late phase: five cases of fractures in the early phase, no case in the late phase; eight and two cases of lateral femoral cutaneous nerve injury, respectively; three and two cases of heterotopic ossification, respectively; and one case of dislocation, one case of infection and three cases of others in the early phase. The CUSUM chart for the fracture rate during operation in the early phase revealed the following: five cases fracture (17.2%) in the early phase and no case in the late phase (0%). This highlights the learning curve and the need for monitoring the inadequacy of operation based on the complications. Conclusion: Hip arthroplasty performed by the direct anterior approach based on an anatomical understanding makes it difficult to observe the surgical field and requires a learning curve of at least 30 cases.