• Title/Summary/Keyword: [O]/[$N_2$] ratio

Search Result 1,313, Processing Time 0.029 seconds

TRAO KSP TIMES: Homogeneous, High-sensitivity, Multi-transition Spectral Maps toward the Orion A and Ophiuchus Cloud with a High-velocity Resolution.

  • Yun, Hyeong-Sik;Lee, Jeong-Eun;Choi, Yunhee;Evans, Neal J. II;Offner, Stella S.R.;Heyer, Mark H.;Lee, Yong-Hee;Baek, Giseon;Choi, Minho;Kang, Hyunwoo;Cho, Jungyeon;Lee, Seokho;Tatematsu, Ken'ichi;Gaches, Brandt A.L.;Yang, Yao-Lun;Chen, How-Huan;Lee, Youngung;Jung, Jae Hoon;Lee, Changhoon
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.44 no.2
    • /
    • pp.68.1-68.1
    • /
    • 2019
  • Turbulence plays a crucial role in controlling star formation as it produces density fluctuation as well as non-thermal pressure against gravity. Therefore, turbulence controls the mode and tempo of star formation. However, despite a plenty of previous studies, the properties of turbulence remain poorly understood. As part of the Taeduk Radio Astronomy Observatory (TRAO) Key Science Program (KSP), "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale (TIMES; PI: Jeong-Eun Lee)", we mapped the Orion A and the Ophiuchus clouds, in three sets of lines (13CO 1-0/C18O 1-0, HCN 1-0/HCO+ 1-0, and CS 2-1/N2H+ 1-0) with a high-velocity resolution (~0.1 km/s) using the TRAO 14-m telescope. The mean Trms for the observed maps are less than 0.25 K, and all these maps show uniform Trms values throughout the observed area. These homogeneous and high signal-to-noise ratio data provide the best chance to probe the nature of turbulence in two different star-forming clouds, the Orion A and Ophiuchus clouds. We present comparisons between the line intensities of different molecular tracers as well as the results of a Principal Component Analysis (PCA).

  • PDF

The Optimal Culture Conditions and Antifungal Activity of Culture Extract from Oudemansiella mucida (끈적긴뿌리버섯(Oudemansiella mucida)의 최적배양조건 및 배양 추출액의 항균작용에 관한 연구)

  • Choi, Mi-Ryue;Cho, Hae-Jin;Lee, Jae-Seong;Kim, Hye-Young;Lee, Tae-Soo
    • The Korean Journal of Mycology
    • /
    • v.39 no.2
    • /
    • pp.91-98
    • /
    • 2011
  • Oudemansiella mucida, an edible and medicinal mushrooms belonging to Tricholomataceae of Basidiomycota, has been known to produce antifungal substances to inhibit the mycelial growth and spore germination of the plant pathogenic fungi. To produce good amount of antifungal substances from culture media, the optimal culture conditions of O. mucida were investigated. The most favorable conditions for the mycelial growth were $25^{\circ}C$ and pH 5 in potato dextrose agar. The most favorable carbon and nitrogen sources promoting mycelial growth were maltose and calcium nitrate, respectively. The optimum C/N ratio was about 20 : 1 in case that 3% glucose was supplemented to the basal medium as a carbon source. The optimal mycelial growth of O. mucida was found in the Hennerberg medium. The crude extract from submerged culture of potato dextrose broth exhibited inhibition of mycelial growth of Colletotrichum acutatum, Botrytis cinerea and Pyricularia oryzae but, fungicidal activity is not good enough to compared with commercially available fungicides tested. Therefore, the antifungal substances extracted from submerged culture of O. mucida might have a potential to be used for biocontrol agent of fungal diseases of plants.

A Study of $C_9$-aldehyde Synthesis from n-Butene (노르말부텐으로부터 $C_9$-알데히드 합성에 관한 연구)

  • Jeon, Jong-Ki;Park, Seong-Ki;Park, Young-Kwon
    • Clean Technology
    • /
    • v.14 no.3
    • /
    • pp.176-183
    • /
    • 2008
  • The purpose of this study is to upgrade the catalysts for synthesizing mixed octenes using normal butene and the catalysts for synthesizing $C_9$-aldehyde through hydroformylation of mixed octenes with syngas. The in-line activation method with circulating activating solution was effective for activation of the $NiO/A1_{2}O_3$ catalyst. The reason for catalyst deactivation may be ascribed to physi-sorbed materials or oligomers which block pore entrance and then prevent active sites from participating a reaction. Continuous distillation apparatus was used for separating mixed octenes from dimerization products. When reflux ratio was above 3 : 1, mixed octene fraction of which purity was above 99.57% was obtained. In $C_9$-aldehyde synthesis through hydroformylation of mixed octenes, we investigated a performance of ligand which increased catalyst stability as well as activity of Co catalyst. The results indicated that TPPO, NMP, NDMA, and succinonitrile were suitable ligand for increasing initial activity and reducing loss of Co during catalyst recovery.

  • PDF

Effect of Different Fertilizer Levels, Split Application Rate, and Seeding Methods on Dry Matter Yield and Forage Quality of Italian ryegrass in Early Spring on Paddy Field (이탈리안 라이그라스의 논 춘파재배시 시비수준, 분시비율, 파종방법이 생산성 및 사료가치에 미치는 영향)

  • Kim, Young-Jin;Jung, Jeong-Sung;Choi, Ki-Choon
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.36 no.4
    • /
    • pp.303-308
    • /
    • 2016
  • This study was carried out to determine the effects of application levels of fertilizer and sowing methods on yields and nutritive values of Italian ryegrass (IRG) in early spring. Five fertilizer levels were used: Treatment 1, 100-80-80 kg/ha; Treatment 2, 120-100-100 kg/ha; Treatment 3, 140-120-120 kg/ha; Treatment 4, 160-140-140 kg/ha; Treatment 5, 140-120-120 kg/ha of $N-P_2O_5-K_2O$ with silicate fertilizer 200 kg/ha. Dry matter (DM) yield was 8,330 kg/ha in Treatment 5, 7,686 kg/ha in Treatment 4, and 7,347 kg/ha in Treatment 3. There was no significant difference in total digestible nutrients (TDN) content. The content of crude protein was the highest in Treatment 5. Dry matter ratio was the lowest in Treatment 5. In Treatment 3, DM yield was 7,347 kg/ha, when total amounts of fertilizers were applied at one time. However, DM yield was 7,405 kg/ha, when 50% of pre-planting fertilizer and 50% of supplementary fertilizer were applied at different time. There was no significant difference between total application and split application of fertilizers. However, DM yield was 9,469 kg/ha in application treatment with 100 kg/ha of additional urea at three to four leaf stages of IRG. Regarding DM yield by sowing methods of IRG, the following order was found: drill seeding (8,176 kg/ha) > rotary-broadcast seeding-stamping (7,957 kg/ha) > rotary-broadcast seeding (7,810 kg/ha) > broadcast seeding (7,347 kg/ha) > broadcast seeding-rotary (7,034 kg/ha). DM yield (59.57%) was the lowest in broadcast seeding-rotary. Crude protein content was the highest with rotary work but the lowest with broadcast seeding.

Chemical and Bacteriological Water Qualify of the Sonakdong River (서낙동강 강수의 화학적${\cdot}$세균학적 수질)

  • KIM Yong Gwan
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.19 no.4
    • /
    • pp.347-355
    • /
    • 1986
  • The Sonakdong river is very important water source not only for agricultural water of Kimhae field but also for fishery water. Recently the middle and lower areas of the river have the tendency to be heavily contaminated by domestic sewage and agricultural chemicals. Fifty six water samples were collected from 8 stations from July to December in 1985 for the experiment (Fig. 1). To evaluate the water quality, pH, water temperature, electrical conductivity, chloride ion, nutrients ($NO^{-}_{2}-N,\;NO^{-}_{3}-N,\;NH^{+}_{4}-N,\;PO^{3-}_{4}-P,\;SiO_2-Si$), total coliform, fecal coliform, and fecal streptococcus were determined. Range and mean value of the samples were as follows; pH $6.3{\sim}9.4$, 7.91; water temperature $6.1{\sim}34.8^{\circ}C,\;23.88^{\circ}C$; electrical conductivity (from St. A to G) $1.575{\times}10^2{\sim}30.50{\times}10^2{\mu}{\mho}/cm,\;6.57{\times}10^2{\mu}{\mho}/cm$; chloride ion $23.5{\sim}14,300mg/l$, 770.0mg/l; nitrite-nitrogen $0.007{\sim}0.110mg/l$, 0.053mg/l; nitrate-nitrogen $0.001{\sim}1.638mg/l$, 0.649 mg/l; ammonia-nitrogen $0.017{\sim}4.200mg/l$, 0.497mg/l; phosphate-phoshorus $0.011{\sim}0.281mg/l$, 0.086mg/l; and silicate-silicious $2.4{\sim}6.5mg/l$, 4.43mg/l. Electrical conductivity and chloride ion of the station F(Chomanpo) were $2.676{\times}10^2{\mu}{\Omega}cm$ and 123.99mg/l which were lower than those of others. Among the analyzed nutrients, silicate-silicious concentration was the highest through all the samples. The bacterial density of the samples ranged $36{\sim}110,000/100ml$ for total coliform, $15{\sim}46,000/100ml$ for fecal coliform and $3.6{\sim}15,000/100ml$ for fecal streptococcus. The range and the mean of the TC/FC ratio were $3.0{\sim}9.6$, 5.51 and those of the FC/FS ratio were $1.1{\sim}9.2$, 6.19, respectively. On the other hand, fecal coliform was not detected in about $78\%$ of the water samples examined. Composition of coliform was $52\%$ Escherichia coli group, $3\%$ Citrobacter freundii group, $13\%$ Enterobacter aerogenes group and $31\%$ others.

  • PDF

Effect of Several Application Methods of Yakto on Growth Status of Aerial Parts in Ginseng Seedlings (약토 시용방법이 인삼 양직묘 지상부 생육에 미치는 영향)

  • Lee, Sung-Sik;Cheon, Seong-Ki;Lee, Tae-Su;Yoon, Jong-Hyuk;Park, Hyeon-Suk;Shin, Seong-Lyon;Choi, Kwang-Tae;Lee, Gab-Soo;Ju, Seong-Don;Chung, Jae-Dong
    • Journal of Ginseng Research
    • /
    • v.28 no.4
    • /
    • pp.201-206
    • /
    • 2004
  • This experiment was conducted to determine the economic application method of Yakto among 6 application method : amount of Yakto application $3\;plot(70\;l,\;25.5\;l,\;13,3\;l/kan;\;180cm{\times}90cm),$ and added side dressing(3 l/kan) each plot. The reduced amoumt of Yakto application(25.5 l, 13.3 l/kan) were lower the contents of inorganic nitrogen, $P_{2}O_{5},\;K,\;Ca$ and Mg, but similar pH in bed soil compared with standard Yakto application(70 l/kan). Side dressing applicated on 29 May increased the contents of inorganic nitrogen, $P_{2}O_{5},\;K,\;Ca,\;Mg$ and salt concentration in bed soil compared with non­side dressing in each Yakto application plot(70 l, 25.5 l, 13,3 l/kan). The reduced amoumt of Yakto application(25.5 l/kan) added side dressing(3 l/kan) were similar the contents of inorganic nitrogen, K, Mg and salt but lower $P_{2}O_{5}$ and Ca in bed soil compared with standard Yakto application(70 l/kan) in June. The reduced amoumt of Yakto application(25,5 l/Kan) added side dressing(3 l/kan) was similar the contents of P, K, Ca and Mg but lower N in leaves compared with standard Yakto application(70 l/kan). The reduced amoumt of Yakto application(25.5 l/kan) added side dressing(3 l/kan) was shorter stem length, and higher $5{\%}$ chlorosis of leaf tip, but similar emergence ratio, survival ratio, leaf senescence ratio, chlorophyll, stem diameter and leaf area compared with standard Yakto application(70 l/kan). These suggested that 25.5 l Yakto application added side dressing(3 l/kan) per kan might be possible economical application method of Yakto.

Effects of Plant Extracts on Microbial Population, Methane Emission and Ruminal Fermentation Characteristics in In vitro

  • Kim, E.T.;Kim, C.H.;Min, K.S.;Lee, S.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.25 no.6
    • /
    • pp.806-811
    • /
    • 2012
  • This study was conducted to evaluate effects of plant extracts on methanogenesis and rumen microbial diversity in in vitro. Plant extracts (Artemisia princeps var. Orientalis; Wormwood, Allium sativum for. Pekinense; Garlic, Allium cepa; Onion, Zingiber officinale; Ginger, Citrus unshiu; Mandarin orange, Lonicera japonica; Honeysuckle) were obtained from the Plant Extract Bank at Korea Research Institute of Bioscience and Biotechnology. The rumen fluid was collected before morning feeding from a fistulated Holstein cow fed timothy and commercial concentrate (TDN; 73.5%, crude protein; 19%, crude fat; 3%, crude fiber; 12%, crude ash; 10%, Ca; 0.8%, P; 1.2%) in the ratio of 3 to 2. The 30 ml of mixture, comprising McDougall buffer and rumen liquor in the ratio of 4 to 1, was dispensed anaerobically into serum bottles containing 0.3 g of timothy substrate and plant extracts (1% of total volume, respectively) filled with $O_2$-free $N_2$ gas and capped with a rubber stopper. The serum bottles were held in a shaking incubator at $39^{\circ}C$ for 24 h. Total gas production in all plant extracts was higher (p<0.05) than that of the control, and total gas production of ginger extract was highest (p<0.05). The methane emission was highest (p<0.05) at control, but lowest (p<0.05) at garlic extract which was reduced to about 20% of methane emission (40.2 vs 32.5 ml/g DM). Other plant extracts also resulted in a decrease in methane emissions (wormwood; 8%, onion; 16%, ginger; 16.7%, mandarin orange; 12%, honeysuckle; 12.2%). Total VFAs concentration and pH were not influenced by the addition of plant extracts. Acetate to propionate ratios from garlic and ginger extracts addition samples were lower (p<0.05, 3.36 and 3.38 vs 3.53) than that of the control. Real-time PCR indicted that the ciliate-associated methanogen population in all added plant extracts decreased more than that of the control, while the fibrolytic bacteria population increased. In particular, the F. succinogens community in added wormwood, garlic, mandarin orange and honeysuckle extracts increased more than that of the others. The addition of onion extract increased R. albus diversity, while other extracts did not influence the R. albus community. The R. flavefaciens population in added wormwood and garlic extracts decreased, while other extracts increased its abundance compared to the control. In conclusion, the results indicated that the plant extracts used in the experiment could be promising feed additives to decrease methane gas emission from ruminant animals while improving ruminal fermentation.

Improvement in Mechanical Strength of α-Alumina Hollow Fiber Membrane by Introducing Nanosize γ-Alumina Particle as Sintering Agent (소결조제로 나노크기 γ-알루미나 입자의 도입에 따른 α-알루미나 중공사 분리막의 기계적 강도 향상)

  • Kim, Yong-Bin;Kim, Min-Zy;Arepalli, Devipriyanka;Cho, Churl-Hee
    • Membrane Journal
    • /
    • v.32 no.2
    • /
    • pp.150-162
    • /
    • 2022
  • In the field of water treatment and pharmaceutical bio an alumina hollow fiber membrane used for mixture separation. However, due to the lack of strengths it is very brittle to handle and apply. Therefore, it is necessary to study and improve the bending strength of the membrane to 100 MPa or more. In this study, as the mixing ratio of the nano-particles increased to 0, 1, 3, and 5 wt%, the viscosity of the fluid mixture increased. The pore structure of the hollow membrane produced by interrupting the diffusion exchange rate of the solvent and non-solvent during the spinning process suppresses the formation of the finger-like structure and gradually increases the ratio of the sponge-like structure to improve the membrane mechanical strength to more than 100 MPa. As a result, an interparticle space was ensured to improve the porosity of the sponge-like structure with high permeability, and it showed excellent N2 permeability of about 100000 GPU and high water permeability of 3000 L/m2 h. Therefore, it can be concluded, that the addition of γ-Al2O3 nanoparticles as sintering aid is an important method to enhance the mechanical strength of the α-alumina hollow fiber membrane to maintain high permeability.

The Effect of Dissolved Oxygen and Salinity on Oxygen Consumption and Ammonia Excretion in the Mysid, Neomysis awatschensis (곤쟁이 (Neomysis awatschensis)의 산소소비와 질소배설에 미치는 염분 및 용존산소의 영향)

  • SHIN Yun Kyung;LEE Jung Ah;CHIN Pyung
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.33 no.2
    • /
    • pp.110-114
    • /
    • 2000
  • Effects of the combinations of six oxygen concentrations ($control, 0.6, 1.0, 2.0, 3.4 and 7.4 mg DO/l$) and two salinity levels ($20{\%_{\circ}} and 32{\%_{\circ}}$) on the rates of oxygen consumption, ammonia excretion and mortality of the mysid, Neomysis awatschensis were tested at $20{\circ}C$. The lethal level ($96 hr-LC-(50)$) of dissolved oxygen for mysid at $20{\%_{\circ}} and 32{\%_{\circ}} were 2,20 mg DO/l and 1.60 mg DO/l$ respectively, and all mysids died within $24hr at 0.6 mg DO/l$. Oxygen consumption rate of mysid was increased with dissolved oxygen increase at $20{\%_{\circ}} and 32{\%_{\circ}}$, but ammonia excretion rate was high af $1.0 mg DO/l$ during 96h exposure to DO concentration, and significantly greater in $20{\%_{\circ}} than 32{\%_{\circ}}$. $O:N$ ratio of mysid exposed during 96hr with salinity anil dissolved oxygen was below $10 at 20{\%_{\circ}} and 1,0{\~}2.0 mg DO/l, and was 4.4 at 32{\%_{\circ}} and 1.0 mg DO/l$. These results indicated that mysids were capable of changing their energy substrate in response to salinity and DO changes, and obtaining energy from proteins.

  • PDF

Plasma Etching Characteristics of Sapphire Substrate using $BCl_3$-based Inductively Coupled Plasma ($BCl_3$ 계열 유도결합 플라즈마를 이용한 사파이어 기판의 식각 특성)

  • Kim, Dong-Pyo;Woo, Jong-Chang;Um, Doo-Seng;Yang, Xue;Kim, Chang-Il
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.11a
    • /
    • pp.363-363
    • /
    • 2008
  • The development of dry etching process for sapphire wafer with plasma has been key issues for the opto-electric devices. The challenges are increasing control and obtaining low plasma induced-damage because an unwanted scattering of radiation is caused by the spatial disorder of pattern and variation of surface roughness. The plasma-induced damages during plasma etching process can be classified as impurity contamination of residual etch products or bonding disruption in lattice due to charged particle bombardment. Therefor, fine pattern technology with low damaged etching process and high etch rate are urgently needed. Until now, there are a lot of reports on the etching of sapphire wafer with using $Cl_2$/Ar, $BCl_3$/Ar, HBr/Ar and so on [1]. However, the etch behavior of sapphire wafer have investigated with variation of only one parameter while other parameters are fixed. In this study, we investigated the effect of pressure and other parameters on the etch rate and the selectivity. We selected $BCl_3$ as an etch ant because $BCl_3$ plasmas are widely used in etching process of oxide materials. In plasma, the $BCl_3$ molecule can be dissociated into B radical, $B^+$ ion, Cl radical and $Cl^+$ ion. However, the $BCl_3$ molecule can be dissociated into B radical or $B^+$ ion easier than Cl radical or $Cl^+$ ion. First, we evaluated the etch behaviors of sapphire wafer in $BCl_3$/additive gases (Ar, $N_2,Cl_2$) gases. The behavior of etch rate of sapphire substrate was monitored as a function of additive gas ratio to $BCl_3$ based plasma, total flow rate, r.f. power, d.c. bias under different pressures of 5 mTorr, 10 mTorr, 20 mTorr and 30 mTorr. The etch rates of sapphire wafer, $SiO_2$ and PR were measured with using alpha step surface profiler. In order to understand the changes of radicals, volume density of Cl, B radical and BCl molecule were investigated with optical emission spectroscopy (OES). The chemical states of $Al_2O_3$ thin films were studied with energy dispersive X-ray (EDX) and depth profile anlysis of auger electron spectroscopy (AES). The enhancement of sapphire substrate can be explained by the reactive ion etching mechanism with the competition of the formation of volatile $AlCl_3$, $Al_2Cl_6$ or $BOCl_3$ and the sputter effect by energetic ions.

  • PDF