• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.135-135
• /
• 2001

Purpose： To know the differences of the proton MR spectroscopic features of the liver between th patients with graft-versus-host disease (GVHD) and without GVHD (non-GVHD) after to marrow transplantation (BMT), and to evaluate the possibility to discriminate GVHD fro non-GVHD by analysis of the in vivo proton MR spectra. Method： We evaluated the in vivo proton MR spectra from the livers of 37 patients wh underwent BMT. Our series included 14 cases with GVHD and 23 without GVHD in the liver. Nineteen men and 18 women were included in our series. All cases of GVHD and 2 o non-GVHD were confirmed by liver biopsy and remaining of non-GVHD by evaluation clinical follow up. Proton MR spectroscopy (1H-MRS) was performed at 1.5T GE Sign Horizon (GE Medical System, Milwaukee, USA) system using localized proton STEAM sequence and body coil in all cases with subjects were located in supine position. N respiratory interruption was required during the spectroscopic signal acquisition. Paramete using in MRS were： TR = over 3000ms, TE = 30ms, number of scans = 128, voxel size = ($2{\times}2{\times}2$)$cm^3$, and one NEX. We evaluated the spectra with an attention to the differences o patterns of the peaks between GVHD and non-GVHD groups. The ratio of peak area of peaks at 1.6-4.1ppm to lipid (0.9-1.6ppm) [P(1.6-4.1ppm)/P(0.9-1.6ppm)] was calculated in GVHD and non-GVHD group, and compared the results between these groups. We als evaluated the sensitivity and specificity for discriminating GVHD from non-GVHD by anal of 1H-MRS.

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.99-107
• /
• 1997

In this study, a series of batch-scale tests were conducted to optimize the design parameters for the application of soil washing techniques to the hydrophobic organic compounds(HOCs)-contaminated soil and to find the effective methods for the recovery of surfactants from washing effluent by using solvent. Several nonionic surfactants (polyoxyethylene oleyl ester) and sophorolipid were applied to the artificially contaminated soil (4,000 mg n-dodecane/kg dry soil). The effects of washing time, concentration of surfactant solution, dilution ratio, and temperature on washing efficiencies were examined. Hydrophile-liphophile balance (HLB) number was proven to be one of the important parameters for soil washing. The HLB numbers of OA-5 and sophorolipid are too low to form a stable soil-water emulsion. They showed very low washing efficiencies less than 10e1o. If HLB number is in the proper range to form a stable soil-water emulsion, surfactant having higher solubility for HOCs shows higher washing efficiency. OA-14 having higher HLB number than OA-9 formed more stable soil-water emulsion. But its washing efficiency was about 20% due to a lower molar solubility ratio (MSR) than OA-9. OA-9, which forms a stable soil-water emulsion and has comparatively high sotubility for HOCs, showed about 60% washing efficiency by itself. To recover anthracene effectively from OA-9 washing effluent by using benzene as an organic solvent, desirable temperature and pH were $30^{\circ}C$ and 2, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.412-420
• /
• 1995

Oxygen consumption (OC), ammonia nitrogen (AN ) excretion and body composition were measured to study the effects of energy/protein ratio (EPR) on the utilization of protein and energy in juvenile rockfish, Sebastes schiegeli. Juvenile rockfish were divided into three groups that they fed three isocaloric diets (3,5kcal/g) containing 30 (I), 40 (II) or $50\%$ crude protein (III). EPR of the three experimental diets were 11.5 (I), 8.7 (II) and 7.0kcal/g III), respectively. Juvenile rockfish (wet wt. 2.9-3.1g) were cultured in 501 aquaria with the constant environmental condition of $20-24^{\circ}C$ water temperature and $34\%o$ salinity. For 24 hr after feeding the diets, juvenile rockfish fed diet III had a higher OC than did the fish from groups fed diets I and II, and average OC of the fish fed diets I, II and III were $0,93\pm0.02^a,\;0.92\pm0.02^a\;and\;1.03\pm0.03^bml\;O_2/g/h$, respectively. AN responses of juvenile rockfish to increasing levels of dietary protein (decreasing dietary EPR) were significantly different among three groups in which dietary protein at elevated levels increased the excretion of AN for 24 hr after feeding the diets. Average AN excretion of the fish fed diets I, II and III were $9.14\pm0.39^a,\;12.41\pm 0.53^a\;and\;14.89\pm0.55^c\;{\mu}g\;N/g/h$ respectively. The body protein content of the fish fed diet II for 59 days was significantly higher than that of the fish fed the other diets. But, there were no significant differences between three groups in body lipid, carbohydrate and ash contents. These results indicate that EPR of 9.7kcal/g (diet II) could be a optimum EPR in juvenile rockfish diet.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.349-356
• /
• 1995

To produce PHA(polyhydroxyalkanoic acid) from microbr, dozens of microorganism have been screened from sewage sludge. Selected a strain HJ out of 50 strains of PHA producing bacteria has a capability of accumulating large amounts of PHB/HV copolymer when grown in batch culture with a single carbon source (glucose) that was not generally considered as precursor of hydroxyvalerate monomer unit. The strain HJ was identified as the genus Pseudomonas with respect to morphological, cultural, and biochemical characteristics. The optimal temperature and pH for cell growth were $37^{\circ}C$ and 7.0. The optimal medium compositions for cell growth were glucose 1% as a carbon source, (NH4) 2SO4 0.2% as a nitrogen source, K2HPO4 0.3%, and KH2PO4 0.45%. TO investigate she optimal condition for PHA production two-step cultivation method was employed. PHA production was inducted by deficiency of NH4+, SO4-2, Mg+2. Besides carbon source, deficiency of all nutrients stimulated PHA productivity but deficiency of NH4+ stimulated the most HV monomer content. The highest PHA production was C/N molar ratio 95.2. Pseudomonas sp. HJ was also able to pyoduc PHB/HV copolymer when cultivated on alkane, alkanoate, alcohol as carbon sources. The contents of PHA and she proportions of hydroxyvalerate monomer units varied depending on the carbon sources. Especially Pseudomonas sp. HJ was able to incorporate hydroxyvalerate into PHB/HV to level as high as from 49 to 74 mol% when grown in a medium containing hexadecane and propionate. The purified PHA was identified PHB/HV copolymer by HNMR analysis.

• Radiation Oncology Journal
• /
• v.34 no.3
• /
• pp.202-208
• /
• 2016

Purpose: Our institution has implemented two different adjuvant protocols in treating patients with non-small cell lung cancer (NSCLC): chemotherapy followed by concurrent chemoradiotherapy (CT-CCRT) and sequential postoperative radiotherapy (PORT) followed by postoperative chemotherapy (POCT). We aimed to compare the clinical outcomes between the two adjuvant protocols. Materials and Methods: From March 1997 to October 2012, 68 patients were treated with CT-CCRT (n = 25) and sequential PORT followed by POCT (RT-CT; n = 43). The CT-CCRT protocol consisted of 2 cycles of cisplatin-based POCT followed by PORT concurrently with 2 cycles of POCT. The RT-CT protocol consisted of PORT followed by 4 cycles of cisplatin-based POCT. PORT was administered using conventional fractionation with a dose of 50.4-60 Gy. We compared the outcomes between the two adjuvant protocols and analyzed the clinical factors affecting survivals. Results: Median follow-up time was 43.9 months (range, 3.2 to 74.0 months), and the 5-year overall survival (OS), locoregional recurrence-free survival (LRFS), and distant metastasis-free survival (DMFS) were 53.9%, 68.2%, and 51.0%, respectively. There were no significant differences in OS (p = 0.074), LRFS (p = 0.094), and DMFS (p = 0.490) between the two protocols. In multivariable analyses, adjuvant protocol remained as a significant prognostic factor for LRFS, favouring CT-CCRT (hazard ratio [HR] = 3.506, p = 0.046) over RT-CT, not for OS (HR = 0.647, p = 0.229). Conclusion: CT-CCRT protocol increased LRFS more than RT-CT protocol in patients with completely resected NSCLC, but not in OS. Further studies are warranted to evaluate the benefit of CCRT strategy compared with sequential strategy.

• Journal of Korean Society of Forest Science
• /
• v.109 no.2
• /
• pp.157-168
• /
• 2020

The sensitivity of forest soil to acidification in the Republic of Korea (ROK) was evaluated based on pH_H2O, cation exchange capacity (CEC), and base saturation (BS). Sensitivity to acidification was categorized into three grades: adequate level (AL, pH ≧ 4.2, CEC ≧ 15cmol/kg, BS ≧ 15%), caution level (CL, at least one indicator is below AL), and severe Level (SL, all three indicators are below AL). Soil samples were collected from the 65 stationary monitoring plots (40 × 40 ㎢), distributed throughout ROK. Only 19% of soil samples were classified as AL, while 66% and 15% were CL and SL, respectively. The median of pH_H2O, CEC, BS, and Ca/Al indicator in AL soils was pH 4.64, 20.7cmol/kg, 29%, and 6.3, respectively. Moreover, BC_ex (K⁺, Mg²⁺, Ca²⁺) and available phosphorus (AP) concentration compared with a threshold value and molar ratio of BC_ex and AP to total nitrogen (TN) was high. This indicates that AL soils have a good nutrient condition. The molar Ca/Al ratio, an indicator for toxicity of exchangeable aluminum (Al_ex), was more than 1, indicating no negative impact of Al_ex on plant growth. On the contrary, the median of pH_H2O, CEC, and BS in SL soils was pH 4.02, 13.2cmol/kg, and 10%, respectively. The Ca/Al index was less than 0.6, which indicates that negative impacts of Al_ex on plants were high. Furthermore, both the concentration of BC_ex in SL soils and the BC_ex/TN ratio were the lowest among the three acidity degrees. This shows that SLsoils can be degraded by soil acidification compared with less acidic soils.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.4
• /
• pp.235-244
• /
• 1976

Following results are obtained by re-evaluating N. P. K. and soil improvement trials conducted from 1964 to 1969 in valley paddy soils in rolling lands (Jisan-series, imperfectly drained and Yongji-series, moderately well drained). 1. Average grain yield of rice in no fertilizer plots and the highest yield plots for Yongji-series (31 experiments) were 319 and 507kg/10a respectively, and that of Jisan-series (15 experiments) were 396 and 567kg/10a respectively. The fertility difference between two series may have been a result of the cultivation history. Jisan-series is a mature soil which has a long cultivation history and Yongji-series is sub-mature soil 2. Soil chemical characteristics for Jisan-series are charaterized by 12.8meq/100g in CEC, 6.5meq/100g in exchangeable Ca, 3.9% in OM, and 64 ppm in available $P_2O_5$ For Yongji-series they were 10.4meq/100g in CEC, 4.7meq/100g in exchangeable Ca, 3.2% in OM and 103ppm in available $P_2O_5$. 3. Deep plowing and application of organic matter and lime are expected to be effective in increasing fertility level of soils of Yongji-series. The same will be effective in some soils of Jisan series where the fertility level is low. 4. Jisan-series shows high response to nitrogen, while Yongji series shows sharp decrease in rice yield at the high levels of nitrogen. Both series, however, showed high response to nitrogen only when the OM level was higher than 3%. 5. The optimum level of nitrogen was 8~9kg for Jisan-series, and 10~11kg/10a for Yongji-series. The yield increase per kg of applied nitrogen was 12kg for Jisan-series and 13kg for Yongji series. 6. The optimum level of phosphorus at the optimum level of nitrogen was 6kg/10a for Yongji-series and 3kg/10a for Jisan-series. The optimum level of phosphorus, however, was different depending upon the nitrogen level. It was assumed that Yongji-series required more fertilizer (available $P_2O_5$ was 110ppm) than Jisan-series (available $P_2O_5$ was 64ppm) because the availability of P was higher in Jisan-series than Yongji-series due to the severe reduction of Jisan-series. 7. The response of potassium was also depending upon the nitrogen level. In Yongji-series the potassium response at 8kg/10a nitrogen level decreased with increasing levels of potassium, but the higher level of introgen, potassium response was also higher. In Jisan-series potassium response was recognized at all nitrogen levels. The optimum level of potassium at the optimum level of nitrogen was 8kg/10a in both serieses. 8. The reasonable ratio of NPK fertilizer seems to be 1:0.6:0.6:for Yongji-series and 1:0.4:1 for Jisan-series as N:$P_2O_5$:K.

• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.27-40
• /
• 1993

High temperature tensile tests, steady state creep tests, Internal stress tests and creep rupture tests using A17075 alloy( $T_{6}$ ) were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ (0.4 $T_{m}$ ~0.85 $T_{m}$ ) and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$). The main results obtained in this paper were as follows. (1) The activation energies for yielding at the temperature of 0.4 $T_{m}$ ~0.75 $T_{m}$ were calculated to be 25.7~36.5kcal/mol, which were nearly equal to the activation energies for creep. (2) At around the temperature of 9$0^{\circ}C$~12$0^{\circ}C$ and under the stress level of 10~17.2(kgf/$\textrm{mm}^2$), and at around the temperature of 200~41$0^{\circ}C$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$) and again at around the temperature of 470~50$0^{\circ}C$ and under the stress level of 0.62~l.02(kgf/$\textrm{mm}^2$), the applied stress dependence of steady state creep rate $n_{measu}$ measured were, respectively, 3.15, 6.62 and 1.1, which were in good agreement the calculated stress dependence $n_{ealeu}$ obtained by the difference of the applied stress dependence of the Internal stress and the ratio of the internal stress to the applied stress. (3) At the temperature range of 0.4~0.43 $T_{m}$ , and at the temperature range of 0.52~0.75 $T_{m}$ and again at the temperature range of 0.82~0.85 $T_{m}$ , the activation energies $Q_{measu}$ obtained by steady state creep rate, respective, 26. 16, 34.9, 36.2 and 36.1kcal/mol, which were in good agreement with those obtained with the activation energies under constant effective stress and the temperature dependence of Internal stress. (4) At the temperature range of the 0.52~0.73 $T_{m}$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$), the stress dependence of rupture life(n’) measured was 6.3~6.6, which was in good agreement with the stress dependence of steady state creep rate(n). And at the same condition the activation energy for rupture( $Q_{f}$ ) measured was 32.0~36.9kca1/mol, which was also in good agreement with the activation energy obtained by steady state creep rate ( $Q_{c}$ ). (5) The rupture life( $t_{f}$ ) might be represented by athermal process attributed to the difference of the applied stress dependence of the internal stress and the ratio of the internal stress to the applied stress, and the thermal activated process attributied to the temperature dependence of the internal stress as $t_{f}$ = A'$\sigma$$_{a}$ ｛n(1-d $\sigma$$_{i}$ /d $\sigma$$_{a}$ )/(1-$\sigma$$_{i}$ / $\sigma$$_{a}$ )｝.exp[｛ $Q_{c}$ $^{*}$-( $n_{o}$ R $T^2$/ $E_{(T)}$) (d $E_{(T)}$/dT) - ( $n_{0}$ R $T^2$/ $\sigma$$_{a}$ - $\sigma$$_{i}$ ) (d $\sigma$$_{i}$ /dT)｝/RT]. (6) The relationship betwween Larson-Miller rupture parameter and logarithmic stress was linearly decreased, so creep rupture life of Al 7075 alloy seemed to be predicted exactly with Larson-Miller parameter.meter.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.98-103
• /
• 2012

Poly(2,6-dimethyl-1,4-phenylene ether) (PPE) was synthesized using $Cu(NO_2)_2{\cdot}3H_2O$ or CuCl catalyst with various amounts of ligand and base in several different solvent systems. CuCl/1-methylimidazole/ammonium hydroxide was found to be an effective catalyst system which showed the highest polymer yield and molecular weight. The effects of catalyst/monomer ratio, different amine ligands, and the content of mono-functional reagent 2,4,6-trimethylphenol (TMP) additive on the polymer yield and molecular weight were investigated. Among the co-solvent systems used in this polymerization, chloroform/methanol 9/1(v/v) gave the highest polymer yield and molecular weight ($\overline{M_n}$ 55 K, $\overline{M_w}$ 92 K, PDI 1.7). The catalytic activity between CuCl and CuI was compared by oxygen-uptake experiments and the formation of sideproduct, 5,5'-tetramethyl-4,4'-diphenoquinone (DPQ), was analyzed by ultraviolet spectroscopy.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.9-16
• /
• 2005

The performance of satellite range measurement using tone method was analyzed in the presence of satellite link AWGN. The phase errors in range measurement are generated by AWGN of satellite up- and down-link and the degradations of satellite range measurement are dependent on the transmission mode and loop bandwidth of satellite measurement system. The analyzed effects for satellite measurement in presence of satellite link noise were also analyzed with the measured satellite range data via satellite range measurement system operating in satellite link AWGN. In RAU mode, the satellite range differences of 14.4 to 40.6 m were occurred according to the loop bandwidth of satellite range measurement system and the degradation of 0.3 dB compared with theoretical value was generated under condition of the signal-to-noise ratio of 43 dB. In RAU and TM mode, the performances of range measurement were approximately agreed to the that of RAU mode. In order to get the equal performance characteristics with RAU mode, the signal-to-noise ratio of satellite link for RAU and TM mode should be increased by signal power of 2.3 dB, which is a power loss due to transmission of telemetry signal.